DOWNLOAD Sony CMT-EH45DAB / HCD-EH45DAB Service Manual ↓ Size: 3.29 MB | Pages: 38 in PDF or view online for FREE

Use buttons on the remote to create your own program.

Press CD 

 to select the CD function.

Press PLAY MODE 

 repeatedly until “PGM” appears

while the player is stopped.

Press

/

 repeatedly until the desired 

track number appears.
When programming MP3 files, press

 +/

repeatedly to select the desired folder, and then select
the desired file.

Selected track or file number

Press ENTER 

 to add the track or file to the 

program.

Repeat steps 3 through 4 to program additional 
tracks or files, up to a total of 15 tracks or files.

To play your program of tracks or files, press 

.

The program remains available until you open the CD 
compartment. To play it again, select the CD function,
and then press

.

To cancel Program Play, press PLAY MODE
repeatedly until “PGM” disappears while the player is
stopped.

To delete the last track or file of the program, press
CLEAR

 while the player is stopped.

To view program information, such as total track number
of the program, press DISPLAY

repeatedly.

You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.

Tune in the desired station (see “Listening to the 
radio”).

Press TUNER MEMORY

.

Preset number

Press +/

 repeatedly to select your desired 

preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new 
stations.

Press ENTER 

.

Repeat steps 1 through 4 to store other stations.
You can preset up to 20 DAB and 20 FM stations. The
preset stations are retained for about half a day even 
if you disconnect the power cord or if a power failure
occurs.

To call up a preset radio station, press TUNING
MODE

 repeatedly until “PRESET” appears, and 

then press +/

 repeatedly to select the desired 

preset number.

You can preset a DAB service only when it can be received.

Use a TYPE I (normal) tape only.

You can record just the portions you like from a sound
source, including connected audio components.

Use buttons on the unit to control tape recording.

Insert a recordable tape into the cassette holder 
with the side you want to record facing forward.

Prepare the recording source.
Select the desired source to record.
Place the disc you want to record.
When recording a folder from an MP3 disc, press
PLAY MODE

on the remote repeatedly to select 

“

,” and then press

 +/

repeatedly to select

the desired folder.
To record only your favorite CD tracks or MP3 files in 
your desired order, perform steps 2 to 5 of “Creating
your own CD program.”

Start recording.
Press   (record)

, and then start playing the 

desired recording source.
The CD starts playing automatically.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the 
noise.
While recording, you cannot listen to other sources.

To stop recording, press

.

We recommend that you press

 first, and then press

 to

avoid noise being recorded when you stop recording.

The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.

Use buttons on the remote to use the timer functions.

You can fall asleep to music. This function works even if 
the clock is not set.
Press SLEEP 

repeatedly. If you select “AUTO,” the 

system automatically turns off after the current disc or
tape stops or in 100 minutes.
If the tape deck is still playing or recording at the set 
time, the system turns off after the tape deck stops.

You can wake up to CD or tuner at a preset time.

Make sure you have set the clock.

Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/

 to adjust the volume.

To start from a specific CD track or MP3 file, create
your own CD program.

Press CLOCK/TIMER SET

.

Press

/

 repeatedly to select “PLAY SET,” 

and then press ENTER 

.

“ON TIME” appears, and the hour indication flashes.

Set the time to start playing.

Press

/

 repeatedly to set the hour, and 

then press ENTER 

.

The minute indication flashes. Use the procedure
above to set the minutes.

Use the same procedure as in step 4 to set the time 
to stop playing.

Select the sound source.
Press /

repeatedly 

until 

the 

desired

sound source appears, and then press ENTER 

. The

display shows the timer settings.

Press

 to turn off the system.

The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
will not play.

To activate or check the timer again, press CLOCK/
TIMER SELECT

, press

/

repeatedly until

“PLAY SEL” appears, and then press ENTER 

.

To cancel a timer, repeat the same procedure as above
until “OFF” appears, and then press ENTER 

.

To change the setting, start over from step 1.

The Play Timer setting remains as long as the setting is not canceled
manually.

•  This set can be disassembled in the order shown below.

Note:  Follow the disassembly procedure in the numerical order given.

× 10)

× 8)

× 8)

× 10)

× 10)

± 0.4 mm

RB connector
 (CN104)

± 0.4 mm.

R top cabinet block

RG MAIN board

RT connector
 (CN602)

RE module
 (DAB 

RE cassette lid

R cable holder

RT two claws

RB MF-EH10 (tape mechanism deck)

  RT RE.