Sony CMT-DH50R / CMT-DH70SWR / HCD-DH50R / HCD-DH70SWR Service Manual ▷ View online
HCD-DH50R/DH70SWR
17
2-14. HOLDER (BU) ASSY
2-15. LEVER (BU LOCK)
Note: This illustration sees the mechanism deck from bottom side.
1
screw
(B2.6
u 8)
2
lever (CL UP2)
6
holder (BU) assy
5
floating screw
(PTPWH
M2.6)
5
floating screw
(PTPWH
M2.6)
4
LHL support
3
two screws
(B2
u 6)
3
three hooks
4
lever (BU lock)
2
gear (BU lock)
1
gear (cap)
HCD-DH50R/DH70SWR
18
2-16. CLOSE LEVER
Note: This illustration sees the mechanism deck from bottom side.
2-17. LEVER (DIR), GEAR (IDL-B)
Note: This illustration sees the mechanism deck from bottom side.
1
washer (3-1-0.4)
2
SPR-E lever close
4
shaft disc stop
5
close lever
3
claw
4
pulley (gear)
3
nylon washer 1.7
2
claw
washer
0
Lever (DIR)
6
gear (IDL-A)
qa
gear (IDL-B)
1
tension coil spring (DIR)
9
stoper
7
Loosen the screw.
8
Hold the release lever
and change the direction.
5
gear (cap)
HCD-DH50R/DH70SWR
19
2-18. LEVER (LOADING-L/R)
2
two hooks
4
two hooks
– Bottom view –
3
lever (loading-L)
5
lever (loading-R)
SPT-T (loading-R)
SPR-T (loading-L)
1
1
PRECAUTION DURING LEVER (LOADING R/L) INSTALLATION
lever (loading-R)
Align the horizontal position.
lever (loading-L)
Install the both levers so that they move symmetrically.
HCD-DH50R/DH70SWR
20
2-19. LEVER (DISC SENSOR)/(DISC STOP)
2-20. GEAR (IDL-C)
chassis (top)
hole
Install the lever (disc stop) so that the both holes
are aligned.
are aligned.
hole
1
gear (cap)
3
two claws
5
two hooks
6
lever (disc stop)
lever (disc stop)
4
lever (disc sensor)
PRECAUTION DURING DISC STOP LEVER INSTALLATION
2
gear (IDL-L)
4
three hooks
2
two claws
6
claw
1
gear (IDL-F)
7
gear (IDL-C)
3
gear (IDL-D)
5
lever (gear loading) assy
Click on the first or last page to see other CMT-DH50R / CMT-DH70SWR / HCD-DH50R / HCD-DH70SWR service manuals if exist.