Sony CMT-DH3 / CMT-DH5BT / CMT-DH7BT / HCD-DH3 / HCD-DH5BT / HCD-DH7BT Service Manual ▷ View online
5
HCD-DH3/DH5BT/DH7BT
SECTION 1
SERVICING NOTES
MODEL IDENTIFICATION
– Back Panel –
– Back Panel –
MODEL
PART No.
DH3: Singapore
2-892-818-0[]
DH3: Australian
2-892-818-1[]
DH3: Korean
2-892-818-3[]
DH3: Thai
2-892-818-6[]
DH3: Chinese
2-892-818-7[]
DH3: AEP
2-892-818-8[]
DH3: Russian
2-892-818-9[]
DH7BT
2-892-844-0[]
DH5BT: Canadian
2-892-844-1[]
DH5BT: AEP
2-892-844-2[]
DH5BT: Singapore
2-892-844-3[]
DH5BT: Australian
2-892-844-4[]
DH5BT: Korean
2-892-844-6[]
DH5BT: Taiwan
2-892-844-8[]
DH5BT: Thai
2-892-844-9[]
DH5BT: Russian
2-892-845-0[]
DH5BT: Chinese
2-892-845-1[]
DH3: Taiwan
2-892-845-2[]
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40
°
C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
RELEASING THE DISC ANTITHEFT
The disc lock function for the antitheft of an demonstration disc in
the store is equipped.
the store is equipped.
Releasing Procedure :
1. Press the
I
/1
button to turn on the system.
2. Press the
DVD
N
button to select the “DVD”.
3. While pressing the
x
button, press the
Z
button until
“UNLOCKED” displayed on the fluorescent indicator tube
(around 5 seconds).
(around 5 seconds).
Note:
When “LOCKED” is displayed, the disc lock is not released by
turning power on/off with the
turning power on/off with the
I/
1
button.
NOTES ON REPLACEMENT OF THE DMB15 BOARD
New part of EEPROM (IC103) on the DMB15 board cannot be
used. Therefore, if the mounted DMB15 board is replaced, exchange
new EEPROM with that used before the replacement.
used. Therefore, if the mounted DMB15 board is replaced, exchange
new EEPROM with that used before the replacement.
PART No.
Ver. 1.4
6
HCD-DH3/DH5BT/DH7BT
Playable discs
Type
Characteristics
Icon used in
this manual
this manual
Logo
DVD VIDEO
•
DVD VIDEO
•
DVD-R
*
/-RW
*
/+R/+RW
in DVD VIDEO format
*
also in video mode
VR mode
•
DVD-R/-RW
in VR (Video Recording) mode
VIDEO CD
•
VIDEO CD
•
Super VCD
*
•
CD-ROM
*
/-R
*
/-RW
*
*
in VIDEO CD or Super VCD format
CD
•
AUDIO CD
*
•
CD-R
*
/-RW
*
*
in AUDIO CD format
DATA CD
•
CD-ROM/-R/-RW
in DATA CD format, containing
MP3 audio tracks
MP3 audio tracks
1)
, JPEG image
2)
3)
, and
conforming to ISO 9660
4)
Level
1 or Level 2, or Joliet (expansion
format).
format).
Type
Characteristics
Icon used in
this manual
this manual
Logo
DATA DVD
•
DVD-ROM/-R/-RW/+R/+RW
in DATA DVD format containing
MP3 audio tracks
MP3 audio tracks
1)
, JPEG image
2)
3)
, and
conforming to UDF (Universal Disk
Format).
Format).
1)
data. MP3 audio tracks must be in MPEG 1 Audio Layer 3 format.
2)
File System”: Image standards for digital cameras regulated by Japan Electronics and Information
Technology Industries Association (JEITA)).
Technology Industries Association (JEITA)).
3)
4)
Standardization).
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD VIDEO,” and the “CD” logos are trademarks.
(Except US and Canadian models)
7
HCD-DH3/DH5BT/DH7BT
Discs that cannot be played
CD-ROMs recorded in PHOTO CD
format
DATA CDs recorded in MP3 PRO
format
Data part of CD-Extras
format
DATA CDs recorded in MP3 PRO
format
Data part of CD-Extras
1)
Data part of Mixed CDs
2)
Super Audio CDs
DVD Audio discs
DVD-RAMs
DVD Audio discs
DVD-RAMs
code.
A disc that has a non-standard shape
(e.g., heart, square, star).
A disc that has the adhesive cellophane
A disc that has a non-standard shape
(e.g., heart, square, star).
A disc that has the adhesive cellophane
1)
(AUDIO CD data) on the tracks in session 1
and data on the tracks in session 2.
and data on the tracks in session 2.
2)
on the second and subsequent tracks of a
session.
session.
Region code of DVD VIDEOs you
can play back on this system
can play back on this system
Your system has a region code printed
on the back of the unit and will only
play back DVD VIDEOs labeled with
identical region code.
DVD VIDEOs labeled
on the back of the unit and will only
play back DVD VIDEOs labeled with
identical region code.
DVD VIDEOs labeled
will also be
played back on this system.
If you try to play back any other region
code DVD VIDEO, the message
“Playback prohibited by area limitations.”
will appear on the TV screen. Depending
on the DVD VIDEO, no region code
indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
If you try to play back any other region
code DVD VIDEO, the message
“Playback prohibited by area limitations.”
will appear on the TV screen. Depending
on the DVD VIDEO, no region code
indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
Note on DualDiscs
ADualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback
on this product is not guaranteed.
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback
on this product is not guaranteed.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes on CD-R/-RW and
DVD-R/-RW/+R/+RW
DVD-R/-RW/+R/+RW
In some cases, CD-Rs/-RWs and
DVD-Rs/-RWs/+Rs/+RWs cannot be
played back on this system due to the
recording quality or physical condition
of the disc, or the characteristics of
the recording device and authoring
DVD-Rs/-RWs/+Rs/+RWs cannot be
played back on this system due to the
recording quality or physical condition
of the disc, or the characteristics of
the recording device and authoring
back if it has not been correctly
the operation instructions for the
recording device.
Note that some playback functions
may not work with some DVD+Rs/
+RWs, even if they have been correctly
recording device.
Note that some playback functions
may not work with some DVD+Rs/
+RWs, even if they have been correctly
normal playback.
A disc created in Packet Write format
cannot be played back.
A disc created in Packet Write format
cannot be played back.
Note on playback operations of
DVD VIDEOs and VIDEO CDs
DVD VIDEOs and VIDEO CDs
Some playback operations of DVD
VIDEOs and VIDEO CDs may be
VIDEOs and VIDEO CDs may be
Since this system play back DVD
VIDEOs and VIDEO CDs according to
VIDEOs and VIDEO CDs according to
designed, some playback features may
not be available. Also, refer to the
instructions supplied with the DVD
VIDEOs or VIDEO CDs.
not be available. Also, refer to the
instructions supplied with the DVD
VIDEOs or VIDEO CDs.
Music discs encoded with
copyright protection technologies
copyright protection technologies
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
Notes on Multi Session disc
Session discs when an MP3 audio
session. Any subsequent MP3 audio
recorded in later sessions can also be
played back.
played back.
AUDIO CD or VIDEO CD format,
back.
Session disc as an AUDIO CD if there
is a session recorded in AUDIO CD
format on the disc. However, the
system will only play back the disc if
is a session recorded in AUDIO CD
format on the disc. However, the
system will only play back the disc if
CD format.
With DATA CD or DATA DVD, the
system will only play back DivX video
With DATA CD or DATA DVD, the
system will only play back DivX video
(Except US and Canadian models)
•
•
•
•
•
•
•
8
HCD-DH3/DH5BT/DH7BT
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Front panel
Top panel
Remote control (RM-SCD31)
Unit:
?/1
(on/standby)
Remote: TV
?/1
1)
(on/standby)
Press to turn on the system.
Press to turn on the TV.
Press to turn on the TV.
STANDBY indicator
Lights up when the system is turned off.
USB MEMORY indicator
Lights up when an optional USB device
(Digital music player or USB storage
media) is connected.
(Digital music player or USB storage
media) is connected.
Z
(eject)
Press to eject the disc.
Disc slot
+/
−
Press to select an album.
(USB) port
Connect to an optional USB device
(Digital music player or USB storage media).
(Digital music player or USB storage media).
PRESET +/
−
Press to select the preset station.
forward)
Press to select a track or file.
Remote: TV CH +/
−
1)
Press to change the TV channels.
Remote: SLOW
/
Press to watch the slow-motion play.
Remote: TUNING +/
−
Press to tune in the desired station.
m
/
M
(rewind/fast forward)
Press to find a point in a track or file.
ECHO LEVEL
Press to adjust the microphone echo.
MIC LEVEL
Press to adjust the microphone volume.
MIC jack
Connect to a microphone.
AUDIO IN jack
Connect to an optional audio
component.
component.
PHONES jack
Connect the headphones.
DISPLAY
Press to display the disc information or
clock in the front panel display.
clock in the front panel display.
PROGRESSIVE
Press to change the output video format
(Interlace or Progressive format).
(Interlace or Progressive format).
DSGX
Press to reinforce the bass.
IR Receptor
Unit: DVD
N
(play)
Press to select the DVD function.
Press to start playback of a disc.
Press to start playback of a disc.
Unit: USB
N
(play)
Press to select the USB function.
Press to start playback an optional USB
device (Digital music player or USB
storage media).
Press to start playback an optional USB
device (Digital music player or USB
storage media).
Unit: TUNER/BAND
Press to select the TUNER function.
Press to switch among FM and AM band.
Press to switch among FM and AM band.
Unit: AUDIO IN
Press to select the AUDIO IN function.
FUNCTION +/
−
Press to select the function.
REPEAT/FM MODE
Press to listen to a disc, a single track or
file repeatedly.
Press to select FM reception mode
(monaural or stereo).
file repeatedly.
Press to select FM reception mode
(monaural or stereo).
X
(pause)
Press to stop or pause playback.
Remote:
H
2)
(play)
Press to start playback.
VOLUME +/
−
2)
Press to adjust the volume.
TV VOL +/
−
1)2)
Press to adjust the TV volume.
DIMMER
Press to adjust the brightness of the
display.
display.
PICTURE NAVI
Press to select the VIEWER format for
searching the chapters, titles and tracks.
Press to display the thumbnail pictures.
searching the chapters, titles and tracks.
Press to display the thumbnail pictures.
AUDIO
Press to display the current audio signal
on the TV screen.
on the TV screen.
SUBTITLE
Press to switch the language of the
subtitle (DVD VIDEO).
subtitle (DVD VIDEO).
ANGLE
Press to change the angle (DVD VIDEO
with multi-angles only).
with multi-angles only).
DVD/USB/TUNER MENU
Press to display the MENU items on the
TV screen.
Press to preset the radio station.
Press to select the play mode when using
an optional USB device.
TV screen.
Press to preset the radio station.
Press to select the play mode when using
an optional USB device.
EQ
Press to select the sound effect.
DISPLAY
Press to display the Control Menu on the
TV screen.
TV screen.
TV
1)
Press to operate the TV functions.
ADVANCE
Press to advance the current scene during
playback.
playback.
REPLAY
Press to replay the previous scene during
playback.
playback.
c
STEP/ STEP
C
Press to play one frame at a time when
playback is paused.
playback is paused.
O
RETURN
Press to return to the previous menu on
the TV screen.
the TV screen.
V
/
v
/
B
/
b
Press to select the MENU items.
ENTER
Press to enter the settings.
DVD TOP MENU
Press to display the DVD title on the TV
screen.
screen.
CLEAR
Press to delete a pre-programmed track
or file.
or file.
-/--
1)
Press to enter a single digit or double
digit number.
digit number.
Numeric buttons
2)
Press to select a track or file.
Press to enter a password or passcode.
Press to enter a password or passcode.
10/0
1)
Press to enter a double digit number.
KEY CONTROL
2
/
#
Press to change the key to suit your vocal
range.
range.
SCORE
Press to select the difficulty level for
scoring mode.
scoring mode.
KARAOKE MODE
Press to select the Karaoke mode.
KARAOKE PON
Press to activate the KARAOKE PON
function.
function.
TIME/TEXT
Press to change the information in the
front panel display.
front panel display.
TV/VIDEO
1)
Press to switch the input sources.
SLEEP
Press to set the Sleep Timer.
TIMER MENU
Press to set the clock and the timers.
THEATRE SYNC
Press to activate the THEATRE SYNC
function.
function.
1)
This button is used to operate a Sony TV.
For details, see “Operating a Sony TV”.
2)
The numeric button 5, TV VOL +,
VOLUME + ql and H qk buttons have a
tactile dot. Use the tactile dot as a reference
when operating the system.
tactile dot. Use the tactile dot as a reference
when operating the system.
1
2
7
8
9
q;
qa
qs
qd
qf
qg
qh
qj
qk
ql
w;
wa
ws
wd
wf
wg
wh
wj
wk
wl
e;
ea
es
ed
ef
eg
eh
ej
ek
el
3
4
5
6
.
/
>
(go backward/
x
(stop)
– HCD-DH3 –
Click on the first or last page to see other CMT-DH3 / CMT-DH5BT / CMT-DH7BT / HCD-DH3 / HCD-DH5BT / HCD-DH7BT service manuals if exist.