Sony CMT-DC1 / HCD-DC1 Service Manual ▷ View online
HCD-DC1
9
3-4.
FRONT PANEL SECTION
3-5.
TAPE MECHANISM DECK
1
flexible flat (18core) cable
(CN802)
(CN802)
1
flexible flat (18core) cable
(CN301)
(CN301)
1
flexible flat (20core) cable
(CN804)
(CN804)
1
flexible flat (16core) cable
(CN801)
(CN801)
2
connector
(CN501)
(CN501)
3
two screws
(BTP3
(BTP3
×
8)
4
screw (KTP3
×
6)
4
screw (KTP3
×
6)
5
front panel section
4
three screws
(BVTT2.6
(BVTT2.6
×
5)
8
two screws
(BTP3
(BTP3
×
8)
8
two screws
(BTP3
(BTP3
×
8)
9
tape machanism deck
7
TC board
2
flexible flat (9core) cable
(CN302)
(CN302)
6
connector
(CNP1)
(CNP1)
3
connector
(CN303)
(CN303)
5
1
azimuth cap
HCD-DC1
10
3-6.
CD MECHANISM DECK (CDM55F-K6BD41A)
3-7.
BASE UNIT (BU-K6BD41A)
3
screw
(BVTP3
(BVTP3
×
8)
4
CD mechanism deck
(CDM55F-K6BD41A)
(CDM55F-K6BD41A)
2
connector
(CN401)
(CN401)
1
flexible flat cable (19core)
(CN101)
(CN101)
1
floating screw
(PTPWHM2.6)
(PTPWHM2.6)
2
base unit
(BU-K6BD41A)
(BU-K6BD41A)
HCD-DC1
11
3-8.
LOADING MOTOR BOARD
3-9.
CAM (CDM55)
2
belt (CDM55)
B
3
Pull the tray pushing
B
.
4
two screws
(BTP2.6
(BTP2.6
×
6)
5
LOADING MOTOR board
1
Rotate the gear(B) in
the direction of arrow
the direction of arrow
A
.
A
2
lever (SW)
1
torsion spring
6
gear (B)
3
spacer (55)
4
pulley (LDG)
5
gear (A)
7
roller
8
cam (CDM55)
HCD-DC1
12
SECTION 4
TEST MODE
Start
REC pause for 3 seconds
FWD REC
Fast forward
REV Play
REC pause for 3 seconds
REV REC
Rewind
FWD Play
Shut off
Shut off
Shut off
Shut off
1 minute
3 minutes
1 minute
3 minutes
Start
Open the disc tray
Close the disc tray
Play the last track
[Cold Reset]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
the set to the customer.
Procedure:
1. Turn ON the power.
2. Press three buttons
1. Turn ON the power.
2. Press three buttons
x
(TAPE),
x
(CD), and
[TUNER/BAND]
simultaneously.
3. The set is reset.
[Liquid Crystal Display All Lit Check Mode]
Procedure:
1.
1.
Set to standby state.
2.
Press three buttons of
x
(TAPE),
x
(CD), and
[FUNCTION]
simultaneously.
3.
Liquid crystal display are all turned on.
4.
To exit from this mode, press the
I/1
button to turn the power
OFF.
[Tape Deck Aging Mode]
This mode can be used for operation check of tape deck section.
Procedure:
1.
1.
Set a tape in the tape deck.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and
[+]
(TUNING)
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
I/1
button to turn the
power OFF.
Aging mode sequence:
[CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1.
1.
Load a CD disc.
2.
Set to standby state.
3.
Press three buttons of
x
(TAPE),
x
(CD), and
[--]
( TUNING)
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
I/1
button to turn the
power OFF.
Aging mode sequence:
Click on the first or last page to see other CMT-DC1 / HCD-DC1 service manuals if exist.