DOWNLOAD Sony CMT-CPZ1 / HCD-CPZ1 Service Manual ↓ Size: 5.01 MB | Pages: 79 in PDF or view online for FREE

17

• This mode is used to check operations of Amplifier.

1. Press the

I/

1 key to turn the power ON.

2. Press three keys of [DSGX] and x (CD) and [PUSH ENTER]

JOG simultaneously.

3. When the COMMON test mode is activated, “s” blinks on

the liquid crystal display.

4. Turn the [BASS]  knob counterclockwise, “TONE MIN” is

displayed on the liquid crystal display. Turn the [BASS] knob
clockwise, “TONE MAX” is displayed on the liquid crystal
display.

Turn the [TREBLE]  knob clockwise or counterclockwise,

“TONEFLAT” is displayed on the liquid crystal display.

Turn the [VOLUME] knob counterclockwise, “VOL MIN” is

displayed on the liquid crystal display. Turn the [VOLUME]
knob clockwise, “VOL MAX” is displayed on the liquid crystal
display.

5. To release this mode, press the

I/

1 key.

• This mode is used to check the liquid crystal display, LED,

model, destination, software version and key.

1. Press the

I/

1 key to turn the power ON.

2. Press three keys of [DSGX],  [DISPLAY]  and x (CD)

simultaneously.

3. Liquid crystal display and LEDs are all turned on.
4. When you want to enter the model, destination and version display

mode, press the [PLAY MODE/DIRECTION/TUNING MODE] key.
The model and destination are displayed alternately on the
liquid crystal display.

5. Each time [PLAY MODE/DIRECTION/TUNING MODE] key is

pressed, the display changes starting from MC version, GC
version, CD version, CDD version, CDMA version, CDMB
version, BDA version, BDB version, ST version, TA version,
TM version, and TC version this order, and returns to the MC
version display on the liquid crystal display.

6. Press the [REPEAT/FM MODE] key, the key check mode is

activated.

7. In the key check mode, the liquid crystal display displays “K0”.

Each time a key is pressed, “K” value increases. However,
once a key is pressed, it is no longer taken into account.

8. When [FUNCTION] key is pressed while the version numbers

are being displayed except model and destination, year, month
and day of the software creation display. When [FUNCTION]
key is pressed again, the display returns to the software version
display. When [PLAY MODE/DIRECTION/TUNING MODE] key
is pressed while year, month and day of the software creation
are being displayed, the year, month and day of creation of
the software versions are displayed on the liquid crystal display
in the same order of version display.

9. To release this mode, press three keys in the same manner as

step 2, or disconnect the power cord.

• The cold reset clears all data including preset data stored in

the RAM to initial conditions. Execute this mode when
returning the set to the customer.

1. Press the

I/

1 key to turn the power ON.

2. Press three keys of

I/

1 ,  [DISPLAY]  and x (TAPE)

simultaneously.

3. The liquid crystal display becomes blank instantaneously, and

the set is reset.

• This mode moves the optical pick-up to the position durable

to vibration. Use this mode when returning the set to the
customer after repair.

1. Press the

I/

1 key to turn the power ON.

2. Press the [FUNCTION] key to select “CD”.
3. Press three keys of [DSGX], x (CD) and

  + simulta-

neously and the ship mode is set.

• This mode moves the optical pick-up to the position durable

to vibration. Use this mode when returning the set to the
customer after repair.

1. Press the

I/

1 key to turn the power ON.

2. Press the [FUNCTION] key to select “CD”.
3. Press three keys of [DSGX], x (CD) and

  – simulta-

neously.

4. After the “STANDBY” display blinks, “LOCK” is displayed

on the liquid crystal display, and the ship mode is set.

• This mode is used to unable to take sample disc out of disc

slot in the shop.

1. Press the

I/

1 key to turn the power ON.

2. Press the [FUNCTION] key to select “CD”.
3. While pressing the Z (CD) key, press the x (CD) key for

5 seconds.

4. The message “LOCKED” is displayed on the liquid crystal

display and the disc slot is locked. (Even if pressing
the Z (CD) key, the message “LOCKED” is displayed on
the liquid crystal display and the disc slot is locked)

5. To release from this mode, pressing the Z (CD) key, press

the x (CD) key for 5 seconds.

6. The message “UNLOCKED” is displayed on the liquid crystal

display and the disc slot is unlocked.

• This mode can run the CD sled motor freely. Use this mode,

for instance, when cleaning the optical pick-up.

1. Press the

I/

1 key to turn the power ON.

2. Press the [FUNCTION] key to select “CD”.
3. Press three keys of [PLAY MODE/DIRECTION/TUNING MODE],

M L and x (CD) simultaneously.

4. Press the M L key to move the optical pick-up to outside

track, or press the l m key to inside track.

5. Press the

CD

 u key, “LD OFF” is displayed and laser diode

is turned off. Each time

CD

 u key is pressed, laser diode

ON/OFF seitch is performed.

6. To release this mode, press the

I/

1 key.

• This mode can be used for error display of CD section.

1. Press the

I/

1 key to turn the power ON.

2. Press the [FUNCTION] key to select “CD”.
3. Press three keys of [PLAY MODE/DIRECTION/TUNING MODE],

 + and x (CD) simultaneously.

Error code is not displayed on the liquid crystal display.

18

•

This mode used to ckeck operation of optical pick-up.

1. Press the

I/

1 key to turn the power ON.

2. Press the [FUNCTION] key to select “CD”.
3. Press three keys of [PLAY MODE/DIRECTION/TUNING MODE],

l m and x (CD) simultaneously.

4. When the CD servo test mode is activated, optical pick-up

moves.

This mode is for switch the CD power supply on/off. Even if this
state pulls out AC plug, it is held.
Procedure:

1. Press the

I/

1 button to turn the power on.

2. Press the [FUNCTION] button to select CD function.
3. Press the

I/

1 button again to turn the power off (standby).

4. While pressing the x (CD) button, press the

I/

1 button.

5. It turns power on and display “CD POWER”, then display

“ON” or “OFF”.

The AM tuning interval can be changed over 9 kHz or 10 kHz.
Procedure:

1. Press the  

I/

1  button to turn the power on.

2. Press the [TUNER, BAND]  button to select TUNER (AM)

function.

3. Press the  

I/

1  button again to turn the power off (standby).

4. While pressing the [TUNING +] button, press the  

I/

1  button.

5. It turns power on and display “STEP 9kHz” or “STEP 10kHz”,

and thus the tuning interval is changed over.

19

19

HCD-CPZ1

Screw
position

L-CH
peak

within
1dB

Output
level

L-CH
peak

R-CH
peak

within
1dB

Screw
position

R-CH
peak

1. Clean the following parts with a denatured alcohol-moistened

swab:

record/playback heads

pinch rollers

erase head

rubber belts

capstan

idlers

2. Demagnetize the record/playback head with a head de-

magnetizer.

3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to

the parts adjusted.

5. The adjustments should be performed with the rated power

supply voltage unless otherwise noted.

0 dB=0.775 V

1. Mode:  Playback

2. Turn the adjustment screw and check output peaks. If the peaks

do not match for L-CH and R-CH, turn the adjustment screw
so that outputs match within 1dB of peak.

set

HP/MD board
PHONES jack
(J982)

+
–

level meter

test tape
P-4-A063
(6.3 kHz, –10 dB)

1. Demagnetize the record/playback head with a head

demagnetizer.

2. Do not use a magnetized screwdriver for the adjustments.

•

Remove the cover (azimuth) before this adjustment.

3. Mode:  Playback

4. After the adjustments, apply suitable locking compound to

the pats adjusted.

Adjustment Location: Record/Playback/Erase Head

set

test tape
P-4-A063
(6.3 kHz, –10 dB)

oscilloscope

V

H

waveform of oscilloscope

in phase 45

°

90

°

135

°

180

°

good

wrong

HP/MD board
PHONES jack
(J982)

Meter reading

3.06 N • m to 6.96 N • m

31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.19 N • m to 0.58 N • m

2 to 6 g • cm

(0.02 – 0.08 oz • inch)

3.06 N • m to 6.96 N • m

31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.19 N • m to 0.58 N • m

2 to 6 g • cm

(0.02 – 0.08 oz • inch)

6.96 N • m to 14.02 N • m

71 to 143 g • cm

(0.98 – 1.99 oz • inch)

9.80 N • m

100 g or more

(3.53 oz or more)

9.80 N • m

100 g or more

(3.53 oz or more)

Mode

FWD

FWD

back tension

REV

REV

back tension

FF/REW

FWD tension

REV tension

Torque meter

CQ-102C

CQ-102C

CQ-102RC

CQ-102RC

CQ-201B

CQ-403A

CQ-403R

Tape

Signal

Used for

P-4-A063

6.3 kHz, -10 dB

Azimuth Adjustment

+
–

BD board

TP (RFACI)
TP (VC)

oscilloscope

(DC range)

1. Connect oscilloscope to TP (RFACI) and TP (VC) on the BD

board.

2. Press the

I/

1 button to turn the power ON, and press

the Z (CD) button to open the CD disc tray.

3. Set disc (YEDS-18) on the tray and press the

CD

 u button

to playback.

4. Confirm that oscilloscope waveform is as shown in the figure

below. (eye pattern)

A good eye pattern means that the diamond shape (

◊) in the

center of the waveform can be clearly distinguished.

VOLT/DIV: 200 mV
TIME/DIV: 500 ns

level:
0.9 

±

 0.4 Vp-p

TP

(VC)

TP

(RFACI)

IC201

1.

CD Block is basically constructed to operate without adjustment.

2.

Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.

3.

Use an oscilloscope with more than 10 MW impedance.

4.

Clean the object lens by an applicator with neutral detergent when the

signal level is low than specified value with the following checks.

5.

Check the focus bias check when optical pick-up block is replaced.

forward

reverse

20

20

HCD-CPZ1

OPTICAL

PICK-UP BLOCK

(KSM-215DCP)

FOCUS/TRACKING COIL DRIVER,

SLED/SPINDLE MOTOR DRIVER

IC402

SL–

SL+

TRK–

TRK+

FCS–

FCS+

2-AXIS

DEVICE

PD

LD

B

A

D

C

F

E

M402

(SLED)

M

SP–

SP+

M401

(SPINDLE)

M

SYSTEM CONTROLLER

IC301 (1/3)

XTAI 109

XTAO 108

X202

16.9344MHz

S201

(LIMIT)

D +3.3V

CD-L

101

AOUT1 112

AOUT2 117

TAPE REC-L

TAPE PB-L

TUNER-L

AUTOMATIC

POWER CONTROL

Q321

S701

(OUT)

S702

(CHUCK)

CD

DIGITAL

OUT

R-CH

REC/PB SWITCH

Q601, 602
Q681, 682

REC/PB SWITCH

Q680, 681, 688

BIAS OSC

T601

REC BIAS

SWITCH

Q639, 640

A +9V 

BIAS OSC

Q642, 643

ERASE

HRPE601

(REC/PB/ERASE)

L-CH

R-CH

R-CH

REC/PB EQ AMP, ALC

IC601

TUNER UNIT

L OUT

R OUT

CE

R-CH

TUNED

STEREO

ST MUTE

DI

DO

CLK

RDS DATA

RDS INT

AM

ANTENNA

FM ANT

AM ANT

ANT GND

ANT GND

FM 75

Ω

COAXIAL

TAPE MECHANISM

DECK BLOCK

CAPSTAN/REEL

MOTOR DRIVE

Q692, 694

TRIGGER

PLUNGER DRIVE

Q691, 693

M

M

(CAPSTAN/REEL)

(DECK-A)

TRGM+

M+10V

END SW

R REC

F REC

PLAY SW

M

M701

(LOADING)

PACK

• SIGNAL PATH

: CD PLAY (ANALOG)

• R-ch is omitted due to same as L-ch.

: CD PLAY (DIGITAL)

: TAPE PLAY

: TAPE REC

: TUNER

(AEP, UK, East European models)