Sony CMT-CPX1 / HCD-CPX1 Service Manual ▷ View online
5
HCD-CPX1
NOTE ON LEADING THE WIRE (FLAT TYPE) (9 CORE)
Lead the wire (flat type) (9 core) properly to prevent the wire from coming out from the right side of the guides on the sub panel or sagging
inside of the lid.
inside of the lid.
NOTE ON INSTALLING THE HP BOARD
Note:
Follow the assembly procedure in the numerical order given.
lid (TC)
guides
wire (flat type) (9 core)
sub panel
3
three screws
(BVTP2.6
(BVTP2.6
×
8)
1
Lead the cable trough out
the ditch of the HP board
to prevent the cable from
contacting with the CD
mechanism deck.
the ditch of the HP board
to prevent the cable from
contacting with the CD
mechanism deck.
2
HP board
ditch
cable
HP board
6
HCD-CPX1
CLINCHING THE WIRE (FLAT TYPE) (21 CORE)
HANDLING TWO CABLES FROM THE SUB POWER AND THE SWITCHING REGULATOR TO THE MAIN BOARD
heat sink
AMP board
Clinch the wire (flat type) (21 core)
to prevent the wire from contacting with
the heat sink of the AMP board.
to prevent the wire from contacting with
the heat sink of the AMP board.
cable from the switching
regulator to the main board
regulator to the main board
lead pin
cable from the sub power
to the main board
to the main board
fabric no woven (10 – 20)
Note: Do not reuse the current fabric
Note: Do not reuse the current fabric
because it may fall off.
Note: Fix two cables with the lead pin and the fabric non woven (10 – 20),
or they may sag and contact with the CD mechanism deck.
7
HCD-CPX1
SECTION 2
GENERAL
• LOCATION OF CONTROLS
– Front View –
This section is extracted from
instruction manual.
instruction manual.
BASS +/– wa
CD SYNCHRO qa
Disc tray ql
DISPLAY wf
Display window 3
DSG ws
FM MODE qs
FUNCTION 0
PHONES jack qk
PLAY MODE/DIRECTION wd
CD SYNCHRO qa
Disc tray ql
DISPLAY wf
Display window 3
DSG ws
FM MODE qs
FUNCTION 0
PHONES jack qk
PLAY MODE/DIRECTION wd
Remote sensor 2
REPEAT qs
TREBLE +/– w;
TUNER/BAND 9
TUNING MODE wd
TUNING +/– qd
VOLUME +/– qf
REPEAT qs
TREBLE +/– w;
TUNER/BAND 9
TUNING MODE wd
TUNING +/– qd
VOLUME +/– qf
?/1 (power) 1
TAPE
TAPE
Z (eject) 4
TAPE
nN (play) 5
TAPE
x (stop) 6
TAPE
X (pause) 7
TAPE
z REC (record) 8
lm/ML (rewind/fast
forward, go back/go forward)
qd
qd
CD
NX (play pause) qg
CD
x (stop) qh
CD
Z (eject) qj
ALPHABETICAL ORDER
A – Q
R – Z
BUTTON DESCRIPTIONS
1
qa
qs
0
5
6
7
8
9
qg
qd
qh
qj
2
3
4
qf
w;
ql
qk
wa
ws
wd
wf
8
HCD-CPX1
– Remote Control –
CD ws
CLEAR w;
CLOCK/TIMER SELECT 2
CLOCK/TIMER SET 3
DISPLAY 6
ENTER qd
EQ qh
EQ + qg
EQ – ql
CLEAR w;
CLOCK/TIMER SELECT 2
CLOCK/TIMER SET 3
DISPLAY 6
ENTER qd
EQ qh
EQ + qg
EQ – ql
FUNCTION wg
PLAY MODE wa
REPEAT qs
SLEEP 1
TAPE wf
TUNER/BAND wd
TUNER MEMORY 5
TUNING MODE wa
TUNING +/– 9
VOL +/– qk
PLAY MODE wa
REPEAT qs
SLEEP 1
TAPE wf
TUNER/BAND wd
TUNER MEMORY 5
TUNING MODE wa
TUNING +/– 9
VOL +/– qk
?/1 (power) 4
TAPE
TAPE
nN (play) 7
TAPE
x (stop) 8
CD
NX (play pause) 0
CD
x (stop) qa
./> (go back/go forward)
qf
m/M (rewind/fast forward)
qj
ALPHABETICAL ORDER
A – E
F – Z
BUTTON DESCRIPTIONS
2
3
6
8
5
w;
wa
qk
1
4
7
9
qa
0
ws
wd
wf
wg
ql
qd
qg
qs
qf
qh
qj
1
Press
?/1 to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press
. or > repeatedly to set the
hour.
4
Press ENTER.
5
Press
. or > repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press
. or > until “CLOCK” appears,
then press ENTER.
3
Do the same procedures as step 3 to 6
above.
above.
Note
The clock is not displayed in Power Saving Mode.
Setting the clock
Click on the first or last page to see other CMT-CPX1 / HCD-CPX1 service manuals if exist.