Sony CMT-BX1 / CMT-BX3 / CMT-BX5BT / HCD-BX5BT / HCD-CBX1 / HCD-CBX3 Service Manual ▷ View online
8
HCD-BX5BT/CBX1/CBX3
Other Operations
Creating your own program
(Program Play)
(Program Play)
1
Press CD
ȯ
to select the CD function.
2
Press PLAY MODE
ȱ
repeatedly until “PGM” appears
while the player is stopped.
3
Press Ã/Ñ
ȵ
repeatedly until the desired
track or file number appears.
When programming files, press
When programming files, press
+/ˋ
ȵ
repeatedly
to select the desired folder, and then select the desired
file.
file.
Total playing time of program (including
selected track or file)
selected track or file)
Selected track or file
number
number
4
Press ENTER
ȴ
to add the track or file to the
program.
“ˋ ˋ.ˋ ˋ” appears when the total program time
exceeds 100 minutes for a CD, or when you select a
CD track whose number is 21 or over, or when you
select an MP3 file.
“ˋ ˋ.ˋ ˋ” appears when the total program time
exceeds 100 minutes for a CD, or when you select a
CD track whose number is 21 or over, or when you
select an MP3 file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
tracks or files, up to a total of 25 tracks or files.
6
To play your program of tracks or files, press à
ȯ
.
The program remains available until you open the disc
tray. To play the same program again, press à
tray. To play the same program again, press à
ȯ
.
To cancel Program Play
Press PLAY MODE
ȱ
repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR
Ⱥ
on the remote while the player is
stopped.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (See “Listening to the
radio”).
radio”).
2
Press TUNER MEMORY
Ȼ
.
Preset number
3
Press +/ˋ
ȵ
repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER
ȴ
.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE
MODE
ȱ
repeatedly until “PRESET” appears, and
then press +/ˋ
ȵ
repeatedly to select the desired
preset number.
Using the Timers
The system offers two timer functions. If you use the Play
Timer with the Sleep Timer, the Sleep Timer has priority.
Timer with the Sleep Timer, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP
the clock is not set.
Press SLEEP
ȼ
repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops
or in 100 minutes.
or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ˋ
Prepare the sound source, and then press VOLUME
+/ˋ
ȶ
to adjust the volume.
To start from a specific track or file, create your own
program.
program.
2
Press CLOCK/TIMER SET
ȷ
.
3
Press Ã/Ñ
ȵ
repeatedly to select “PLAY SET,”
and then press ENTER
ȴ
.
“ON” appears, and the hour indication flashes.
4
Set the time to start playing.
Press Ã/Ñ
ȵ
repeatedly to set the hour, and
then press ENTER
ȴ
.
The minute indication flashes. Use the procedure
above to set the minutes.
above to set the minutes.
5
Use the same procedure as in step 4 to set the time
to stop playing.
to stop playing.
6
Select the sound source.
Press Ã/Ñ
Press Ã/Ñ
ȵ
repeatedly until the desired
sound source appears, and then press ENTER
ȴ
. The
display shows the timer settings.
7
Press ÒÄÆ
ȩ
to turn off the system.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
will not play.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
ȷ
, press Ã/Ñ
ȵ
repeatedly until “PLAY SEL” appears, and then press
ENTER
ȴ
.
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER
appears, and then press ENTER
ȴ
.
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
manually.
9
HCD-BX5BT/CBX1/CBX3
Guide to parts and controls
This manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit
Front panel
Top panel
Remote
1
`
/
1
(power) button
Press to turn on the system.
2
STANDBY indicator
Lights up when the system is turned off.
3
Remote sensor
4
Z
(open/close) button
Press to open or close the disc tray.
5
USB MEMORY indicator
Lights up when an optional USB device
(Digital music player or USB storage
media) is connected.
(Digital music player or USB storage
media) is connected.
6
AUDIO IN jack
Connect to an optional audio
component.
component.
7
PHONES jack
Connect the headphones.
8
(USB) port
Connect to an optional USB device
(Digital music player or USB storage
media).
(Digital music player or USB storage
media).
9
Playback buttons and function
buttons
Unit: USB
buttons
Unit: USB
NX
(play/pause)
button
Press to select the USB function.
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
Remote: USB button
Press to select the USB function.
Unit: CD
NX
(play/pause)
button
Press to select the CD function.
Press to start or pause playback of a disc.
Press to start or pause playback of a disc.
Remote: CD button
Press to select the CD function.
Remote:
N
(play) button,
X
(pause) button
Press to start or pause playback.
TUNER/BAND button
Press to select the TUNER function.
Press to select FM or AM reception
mode.
Press to select FM or AM reception
mode.
Unit: AUDIO IN button
Press to select the AUDIO IN function.
Remote: FUNCTION button
Press to select the function.
q;
DISPLAY button (page 17)
Press to change the information on the
display.
display.
qa
PLAY MODE/TUNING MODE
button
button
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
qs
Sound buttons
Unit: DSGX button
Remote: EQ button
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.
qd
Unit:
x
/CANCEL (stop/cancel)
button
Remote:
Remote:
x
(stop) button
Press to stop playback.
qf
ENTER button
Press to enter the settings.
qg
.
/
>
(go back/go forward)
button
Press to select a track or file.
Unit: TUNE +/– (tuning) button
Remote: +/– (tuning) button
Remote: +/– (tuning) button
Press to tune in the desired station.
+/– (select folder) button
Press to select a folder.
m
/
M
(rewind/fast forward)
button
Press to nd a point in a track or file.
qh
Unit: VOL +/– button Remote:
VOLUME +/– button
VOLUME +/– button
Press to adjust the volume.
qj
CLOCK/TIMER SELECT button
CLOCK/TIMER SET button
CLOCK/TIMER SET button
Press to set the clock and the Play Timer.
qk
REPEAT/FM MODE button
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
ql
Battery compartment lid
w;
CLEAR button
Press to delete a pre-programmed track
or file.
or file.
wa
TUNER MEMORY button
Press to preset the radio station.
ws
SLEEP button
Press to set the Sleep Timer.
Setting the clock
Use buttons on the remote to set the
clock.
clock.
1
Press
`
/
1
1
to turn on the
system.
2
Press CLOCK/TIMER SET
qj
If the current mode appears on
the display, press ./> qg
repeatedly to select “CLOCK SET”
and then press ENTER qf.
the display, press ./> qg
repeatedly to select “CLOCK SET”
and then press ENTER qf.
3
Press
.
/
>
qg
repeatedly
to set the hour, and then press
ENTER
ENTER
qf
.
4
Use the same procedure to set
the minutes.
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
power failure occurs.
To display the clock when the system
is off
is off
Press DISPLAY
q;
. The clock is displayed
for about 8 seconds.
HCD-CBX3:
HCD-BX5BT/CBX1/CBX3
10
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
SET
3-2. PANEL (SIDE L/R)
(Page 11)
3-3. PANEL (TOP)
(Page 11)
3-9. POWER
TRANSFORMER (T1)
(Page 15)
(Page 15)
3-4. MAIN BOARD,
SHIELD PLATE
(PWB MAIN)
(Page 12)
(PWB MAIN)
(Page 12)
3-5. BT BOARD
(Page 13)
3-6. LID (CD) ASSY
(Page 13)
3-7. PANEL (FRONT) ASSY
(Page 14)
3-10. LOADING MECHANISM
BLOCK
(Page 15)
(Page 15)
3-11. BASE UNIT
(Page 16)
3-12. BELT
(Page 16)
3-13. OP BASE ASSY
(KSM-213D)
(Page 17)
(Page 17)
3-8. D.C. FAN (M301),
PANEL (REAR)
(Page 14)
(Page 14)
3-6. LID (CD) ASSY
(Page 13)
(CBX1/CBX3)
(BX5BT)
3-7. PANEL (FRONT)
ASSY
(Page 14)
(Page 14)
HCD-BX5BT/CBX1/CBX3
11
2
two screws
(BVTT3
(BVTT3
×
6 (BX5BT/CBX1: US/CBX3:
CND, AEP, UK (for PEARL SILVER), AUS, SP, TW, KR)
(BVST3
(BVST3
×
6 (CBX1: CND/CBX3: UK (for GUNMETALLIC), CH)
1
screw (B3)
1
screw (B3)
3
panel (side L)
3
panel (side R)
2
two screws
(BVTT3
(BVTT3
×
6 (BX5BT/CBX1: US/CBX3:
CND, AEP, UK (for PEARL SILVER),
AUS, SP, TW, KR)
(BVST3
AUS, SP, TW, KR)
(BVST3
×
6 (CBX1: CND/CBX3: UK
(for GUNMETALLIC), CH)
•
Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
KR
AUS : Australian model
CH : Chinese model
CND : Canadian model
KR
: Korean model
SP
: Singapore model
TW : Australian model
1
two screws
(BVTT3
(BVTT3
×
6)
7
nine screws
(BVTP2.6)
(BVTP2.6)
qs
panel (top)
6
connector
(CN322)
(CN322)
4
five claws
9
button
(function)
(function)
8
TOP PANEL board
0
button (directory)
qa
button (VOL)
5
2
two screws
(BVTT3
(BVTT3
×
6)
3
five screws
(BVTP3
(BVTP3
×
10
(for PEARL SILVER) (CBX3))
(B3 (BX5BT/CBX1/CBX3: UK
(for GUNMETALLIC))
(B3 (BX5BT/CBX1/CBX3: UK
(for GUNMETALLIC))
•
Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
KR
AUS : Australian model
CH : Chinese model
CND : Canadian model
KR
: Korean model
SP
: Singapore model
TW : Australian model
Note:
Follow the disassembly procedure in the numerical order given.
3-2. PANEL (SIDE L/R)
3-3. PANEL (TOP)
Ver. 1.7
Click on the first or last page to see other CMT-BX1 / CMT-BX3 / CMT-BX5BT / HCD-BX5BT / HCD-CBX1 / HCD-CBX3 service manuals if exist.