Sony CMT-BX1 / CMT-BX3 / CMT-BX5BT / HCD-BX5BT / HCD-CBX1 / HCD-CBX3 Service Manual ▷ View online
7
HCD-BX5BT/CBX1/CBX3
Basic Operations
Before using the system
To use the remote
Slide and remove the battery compartment lid
ȹ
, and
insert the two supplied R6 (size AA) batteries, × side
first, matching the polarities shown below.
first, matching the polarities shown below.
Notes on using the remote
ˎWith normal use, the batteries should last for about six months.
ˎDo not mix an old battery with a new one or mix different types of
ˎDo not mix an old battery with a new one or mix different types of
batteries.
ˎIf you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To set the clock
1
Turn on the system.
Press ÒÄÆ (power)
Press ÒÄÆ (power)
ȩ
.
2
Select the clock set mode.
Press CLOCK/TIMER SET
Press CLOCK/TIMER SET
ȷ
on the remote. If the
current mode appears on the display, press Ã/Ñ
ȵ
repeatedly to select “CLOCK SET” and then press
ENTER
ȴ
.
3
Set the time.
Press Ã/Ñ
Press Ã/Ñ
ȵ
repeatedly to set the hour, and
then press ENTER
ȴ
. Use the same procedure to set
the minutes.
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To display the clock when the system is off, press
DISPLAY
The clock settings are lost when you disconnect the
power cord or if a power failure occurs.
To display the clock when the system is off, press
DISPLAY
Ȱ
. The clock is displayed for about 8
seconds.
Selecting a music source
Press the following buttons (or press FUNCTION
ȯ
repeatedly).
To select
Press
CD
CD
ȯ
on the remote.
Tuner
TUNER/BAND
ȯ
.
Component (connected using
an audio cord)
an audio cord)
AUDIO IN
ȯ
.
Adjusting the sound
To adjust the volume
Press VOLUME +/ˋ on the remote (or VOL +/ˋ on the
unit)
unit)
ȶ
.
To add a sound effect
To
Press
Generate a more dynamic
sound (Dynamic Sound
Generator X-tra)
sound (Dynamic Sound
Generator X-tra)
DSGX
Ȳ
on the unit.
Set the sound effect
EQ
̝
on the remote
repeatedly to select “BASS”
or “TREBLE,” and then
press +/ˋ
or “TREBLE,” and then
press +/ˋ
̠
on the remote
repeatedly to adjust the level.
Playing a CD/MP3 disc
1
Select the CD function.
Press CD on the remote
Press CD on the remote
ȯ
.
2
Place a disc.
Press ì (open/close)
Press ì (open/close)
Ȭ
on the unit, and place a disc
with the label side up on the disc tray.
To close the disc tray, press ì (open/close)
Ȭ
on the
unit.
Do not force the disc tray closed with your finger, as
this may damage the unit.
Do not force the disc tray closed with your finger, as
this may damage the unit.
3
Start playback.
Press à (play) on the remote (or CD àê (play/
pause) on the unit)
Press à (play) on the remote (or CD àê (play/
pause) on the unit)
ȯ
.
To
Press
Pause playback
ê (pause) on the remote (or CD
àê (play/pause) on the unit)
àê (play/pause) on the unit)
ȯ
. To resume play, press the
button again.
Stop playback
Ą (stop)
ȳ
.
Select a folder on an
MP3 disc
MP3 disc
+/ˋ (select folder)
ȵ
.
Select a track or file
Ã/Ñ (go back/go forward)
ȵ
.
Find a point in a
track or file
track or file
Hold down ù/ß (rewind/
fast forward)
fast forward)
ȵ
during playback,
and release the button at the
desired point.
desired point.
Select Repeat Play
REPEAT
ȸ
on the remote
repeatedly until “REP” or “REP1”
appears.
appears.
To change the play mode
Press PLAY MODE
ȱ
repeatedly while the player is
stopped. You can select normal play (“
” for all MP3
files in the folder on the disc), shuffle play (“SHUF” or
“
“
SHUF*”), or program play (“PGM”).
* When playing a CD-DA disc,
(SHUF) Play performs the same
operation as normal (shuffle) play.
Notes on Repeat Play
ˎAll tracks or files on a disc are played repeatedly up to five times.
ˎ“REP1” indicates that a single track or file is repeated until you stop
ˎ“REP1” indicates that a single track or file is repeated until you stop
it.
Notes on playing MP3 discs
ˎDo not save other types of tracks or files or unnecessary folders on a
disc that has MP3 files.
ˎFolders that have no MP3 files are skipped.
ˎMP3 files are played back in the order that they are recorded onto
ˎMP3 files are played back in the order that they are recorded onto
the disc.
ˎThe system can only play MP3 files that have a file extension of
“.MP3”.
ˎIf there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
malfunction.
ˎThe maximum number of:
ˋfolders is 255 (including the root folder).
ˋMP3 files is 511.
ˋMP3 files and folders that can be contained on a single disc is 512.
ˋfolder levels (the tree structure of files) is 8.
ˋMP3 files is 511.
ˋMP3 files and folders that can be contained on a single disc is 512.
ˋfolder levels (the tree structure of files) is 8.
ˎCompatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
ˎIf the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.
ˎA disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Listening to the radio
1
Select “FM” or “AM.”
Press TUNER/BAND
Press TUNER/BAND
ȯ
repeatedly.
2
Select the tuning mode.
Press TUNING MODE
Press TUNING MODE
ȱ
repeatedly until “AUTO”
appears.
3
Tune in the desired station.
Press +/ˋ on the remote (or TUNE +/ˋ on the unit)
Press +/ˋ on the remote (or TUNE +/ˋ on the unit)
ȵ
. Scanning stops automatically when a station is
tuned in, and then “TUNED” and “ST” (for stereo
programs only) appear.
programs only) appear.
To stop automatic scanning
Press Ą (stop)
ȳ
.
To tune in a station with a weak signal
If “TUNED” does not appear and the scanning does not
stop, press TUNING MODE
stop, press TUNING MODE
ȱ
repeatedly until “AUTO”
and “PRESET” disappear, and then press +/ˋ on the
remote (or TUNE +/ˋ on the unit)
remote (or TUNE +/ˋ on the unit)
ȵ
repeatedly to tune
in the desired station.
To reduce static noise on a weak FM stereo
station
station
Press FM MODE
ȸ
on the remote repeatedly until
“MONO” appears to turn off stereo reception.
Changing the display
To
Press
Change
information on the
display
information on the
display
1)
DISPLAY
̛
repeatedly when the
system is on.
Check the clock
when the system
is off
when the system
is off
DISPLAY
̛
when the system is
off
2)
. The clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc information, such as the
track or file number or folder name during normal play, or the total
playing time while the player is stopped.
track or file number or folder name during normal play, or the total
playing time while the player is stopped.
2)
The STANDBY indicator ̕ on the unit lights up when the system is
off.
off.
Notes on the display information
ˎCharacters that cannot be displayed appear as “_”.
ˎThe following are not displayed:
ˎThe following are not displayed:
ˋtotal playing time for a CD-DA disc depending on the play mode.
ˋtotal playing time and remaining playing time for an MP3 disc.
ˋtotal playing time and remaining playing time for an MP3 disc.
ˎThe following are not displayed correctly:
ˋfolder and file names that do not follow either the ISO9660
Level 1, Level 2 or Joliet in the expansion format.
ˎThe following is displayed:
ˋID3 tag information for MP3 files when ID3 version 1 and version
2 tags are used (up to 62 characters).
Using optional audio components
To connect an optional headphones
Connect headphones to the PHONES jack
Ȯ
on the
unit.
To connect an optional component
Connect additional audio component to the AUDIO
IN jack
IN jack
ȭ
on the unit using an audio analog cord (not
supplied). Turn down the volume on the system, and
then select the AUDIO IN function.
then select the AUDIO IN function.
HCD-CBX1:
8
HCD-BX5BT/CBX1/CBX3
Other Operations
Creating your own program
(Program Play)
(Program Play)
1
Press CD
ȯ
to select the CD function.
2
Press PLAY MODE
ȱ
repeatedly until “PGM” appears
while the player is stopped.
3
Press Ã/Ñ
ȵ
repeatedly until the desired
track or file number appears.
When programming files, press
When programming files, press
+/ˋ
ȵ
repeatedly
to select the desired folder, and then select the desired
file.
file.
Total playing time of program (including
selected track or file)
selected track or file)
Selected track or file
number
number
4
Press ENTER
ȴ
to add the track or file to the
program.
“ˋ ˋ.ˋ ˋ” appears when the total program time
exceeds 100 minutes for a CD, or when you select a
CD track whose number is 21 or over, or when you
select an MP3 file.
“ˋ ˋ.ˋ ˋ” appears when the total program time
exceeds 100 minutes for a CD, or when you select a
CD track whose number is 21 or over, or when you
select an MP3 file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
tracks or files, up to a total of 25 tracks or files.
6
To play your program of tracks or files, press à
ȯ
.
The program remains available until you open the disc
tray. To play the same program again, press à
tray. To play the same program again, press à
ȯ
.
To cancel Program Play
Press PLAY MODE
ȱ
repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR
Ⱥ
on the remote while the player is
stopped.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (See “Listening to the
radio”).
radio”).
2
Press TUNER MEMORY
Ȼ
.
Preset number
3
Press +/ˋ
ȵ
repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER
ȴ
.
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE
MODE
ȱ
repeatedly until “PRESET” appears, and
then press +/ˋ
ȵ
repeatedly to select the desired
preset number.
Using the Timers
The system offers two timer functions. If you use the Play
Timer with the Sleep Timer, the Sleep Timer has priority.
Timer with the Sleep Timer, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP
the clock is not set.
Press SLEEP
ȼ
repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops
or in 100 minutes.
or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ˋ
Prepare the sound source, and then press VOLUME
+/ˋ
ȶ
to adjust the volume.
To start from a specific track or file, create your own
program.
program.
2
Press CLOCK/TIMER SET
ȷ
.
3
Press Ã/Ñ
ȵ
repeatedly to select “PLAY SET,”
and then press ENTER
ȴ
.
“ON” appears, and the hour indication flashes.
4
Set the time to start playing.
Press Ã/Ñ
ȵ
repeatedly to set the hour, and
then press ENTER
ȴ
.
The minute indication flashes. Use the procedure
above to set the minutes.
above to set the minutes.
5
Use the same procedure as in step 4 to set the time
to stop playing.
to stop playing.
6
Select the sound source.
Press Ã/Ñ
Press Ã/Ñ
ȵ
repeatedly until the desired
sound source appears, and then press ENTER
ȴ
. The
display shows the timer settings.
7
Press ÒÄÆ
ȩ
to turn off the system.
The system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
will not play.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
ȷ
, press Ã/Ñ
ȵ
repeatedly until “PLAY SEL” appears, and then press
ENTER
ȴ
.
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER
appears, and then press ENTER
ȴ
.
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
manually.
9
HCD-BX5BT/CBX1/CBX3
Guide to parts and controls
This manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit
Front panel
Top panel
Remote
1
`
/
1
(power) button
Press to turn on the system.
2
STANDBY indicator
Lights up when the system is turned off.
3
Remote sensor
4
Z
(open/close) button
Press to open or close the disc tray.
5
USB MEMORY indicator
Lights up when an optional USB device
(Digital music player or USB storage
media) is connected.
(Digital music player or USB storage
media) is connected.
6
AUDIO IN jack
Connect to an optional audio
component.
component.
7
PHONES jack
Connect the headphones.
8
(USB) port
Connect to an optional USB device
(Digital music player or USB storage
media).
(Digital music player or USB storage
media).
9
Playback buttons and function
buttons
Unit: USB
buttons
Unit: USB
NX
(play/pause)
button
Press to select the USB function.
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
Remote: USB button
Press to select the USB function.
Unit: CD
NX
(play/pause)
button
Press to select the CD function.
Press to start or pause playback of a disc.
Press to start or pause playback of a disc.
Remote: CD button
Press to select the CD function.
Remote:
N
(play) button,
X
(pause) button
Press to start or pause playback.
TUNER/BAND button
Press to select the TUNER function.
Press to select FM or AM reception
mode.
Press to select FM or AM reception
mode.
Unit: AUDIO IN button
Press to select the AUDIO IN function.
Remote: FUNCTION button
Press to select the function.
q;
DISPLAY button (page 17)
Press to change the information on the
display.
display.
qa
PLAY MODE/TUNING MODE
button
button
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
qs
Sound buttons
Unit: DSGX button
Remote: EQ button
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.
qd
Unit:
x
/CANCEL (stop/cancel)
button
Remote:
Remote:
x
(stop) button
Press to stop playback.
qf
ENTER button
Press to enter the settings.
qg
.
/
>
(go back/go forward)
button
Press to select a track or file.
Unit: TUNE +/– (tuning) button
Remote: +/– (tuning) button
Remote: +/– (tuning) button
Press to tune in the desired station.
+/– (select folder) button
Press to select a folder.
m
/
M
(rewind/fast forward)
button
Press to nd a point in a track or file.
qh
Unit: VOL +/– button Remote:
VOLUME +/– button
VOLUME +/– button
Press to adjust the volume.
qj
CLOCK/TIMER SELECT button
CLOCK/TIMER SET button
CLOCK/TIMER SET button
Press to set the clock and the Play Timer.
qk
REPEAT/FM MODE button
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
ql
Battery compartment lid
w;
CLEAR button
Press to delete a pre-programmed track
or file.
or file.
wa
TUNER MEMORY button
Press to preset the radio station.
ws
SLEEP button
Press to set the Sleep Timer.
Setting the clock
Use buttons on the remote to set the
clock.
clock.
1
Press
`
/
1
1
to turn on the
system.
2
Press CLOCK/TIMER SET
qj
If the current mode appears on
the display, press ./> qg
repeatedly to select “CLOCK SET”
and then press ENTER qf.
the display, press ./> qg
repeatedly to select “CLOCK SET”
and then press ENTER qf.
3
Press
.
/
>
qg
repeatedly
to set the hour, and then press
ENTER
ENTER
qf
.
4
Use the same procedure to set
the minutes.
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
power failure occurs.
To display the clock when the system
is off
is off
Press DISPLAY
q;
. The clock is displayed
for about 8 seconds.
HCD-CBX3:
HCD-BX5BT/CBX1/CBX3
10
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
SET
3-2. PANEL (SIDE L/R)
(Page 11)
3-3. PANEL (TOP)
(Page 11)
3-9. POWER
TRANSFORMER (T1)
(Page 15)
(Page 15)
3-4. MAIN BOARD,
SHIELD PLATE
(PWB MAIN)
(Page 12)
(PWB MAIN)
(Page 12)
3-5. BT BOARD
(Page 13)
3-6. LID (CD) ASSY
(Page 13)
3-7. PANEL (FRONT) ASSY
(Page 14)
3-10. LOADING MECHANISM
BLOCK
(Page 15)
(Page 15)
3-11. BASE UNIT
(Page 16)
3-12. BELT
(Page 16)
3-13. OP BASE ASSY
(KSM-213D)
(Page 17)
(Page 17)
3-8. D.C. FAN (M301),
PANEL (REAR)
(Page 14)
(Page 14)
3-6. LID (CD) ASSY
(Page 13)
(CBX1/CBX3)
(BX5BT)
3-7. PANEL (FRONT)
ASSY
(Page 14)
(Page 14)
Click on the first or last page to see other CMT-BX1 / CMT-BX3 / CMT-BX5BT / HCD-BX5BT / HCD-CBX1 / HCD-CBX3 service manuals if exist.