DOWNLOAD Sony CFD-S40CP Service Manual ↓ Size: 5.55 MB | Pages: 56 in PDF or view online for FREE

Model
CFD-S40CP
Pages
56
Size
5.55 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cfd-s40cp.pdf
Date

Sony CFD-S40CP Service Manual ▷ View online

5
CFD-S40CP
4
Playing an audio CD or MP3 files
Basic Operations
Connect the supplied AC power cord (see page 23).
1
Press Z PUSH  OPEN/CLOSE  down
to open  the  CD compartment  and
place  the  CD on the CD
compartment.
2
Close the lid of the CD compartment.
3
Press u (N on  the  remote).
The player turns on (direct power-on)
and the player plays all the tracks
once.
To play a disc with MP3 files, see
page 6.
With the label side up
Display
Playing
time
Track
number
1, 2
3
     PUSH
OPEN/CLOSE
     PUSH
OPEN/CLOSE
CD
Basic Operations
5
Use these  buttons  for  additional operations
To
Do this
adjust the volume
Press  VOLUME +, 
(VOL +, —
 on  the  remote).
stop playback
Press x .
pause playback
Press u (X on  the  remote).
Press the button again to
resume play after pause.
go to the next track
Turn the jog dial clockwise.
(On the remote, press >.)
go back  to  the  previous track Turn  the  jog  dial  counterclockwise.
(On the remote,  press 
..)
remove the CD*
Press Z PUSH  OPEN/CLOSE.
turn on/off the player
Press  POWER.
* Once you open the CD compartment, the track to start play will
change  to the beginning  of the first track.
Tip
Playback starts from the
track you last stopped
playing (Resume  play).
During stop,  the track
number to be played are
displayed.
To cancel  the resume play
to start  play from the
beginning of the first track,
press x in stop  mode.
u
POWER
VOLUME +, –
x
Jog dial
Z
 
PUSH
OPEN/CLOSE
continued
6
Playing a disc with MP3 files
1
Press Z PUSH OPEN/CLOSE down to open the CD
compartment  and place  the  CD on the CD compartment
(see page 4) .
2
Close the lid of the CD compartment.
3
Press u (N on  the  remote).
The player turns on and the player plays all files of a disc
(TRACK mode).
When you use a disc with MP3 files, the MP3 indicator
lights up.
Playing a  specific  file (FOLDER mode)
Press FOLDER/TRACK during  stop  to display 
 in the
display, and turn the jog dial to select the folder you want to
play, then press u.
To go to  the  next  track / go back  to the previous
track in  the selected folder
During play
Turn the jog dial.
(Press > or . on  the  remote)
During stop
Press M or m.
(Press TUNE + or - on the remote)
Note
Before playing a file, this
player reads  all file and
folder information  on the
disc. Depending  on the
file structure,  it may  take
more than a minute to
read them. During this
time, TOC READING
is displayed.
Tip
You can use  the buttons
mentioned on page 5 for
additional operations  in
the same way as playing
an audio CD.
Playing an audio CD or MP3  files (continued)
Folder number
Track number
After the  file name  is  displayed,
the playing time will appear
After the  folder name is displayed,
the playing time will appear
u
Mm
Jog dial
Z PUSH
OPEN/CLOSE
FOLDER/TRACK
MP3 indicator
Basic Operations
7
Track mode
Playing all MP3 files from 1, 2, 3...9, 0
Folder mode
Playing all MP3 files in the selected folder.
(Example: If you select folder 3, the player
plays file 4. If you select  folder 4, the  player
plays file 5 and 6.)
CD-R
CD-RW
1
4
2
1
3
5
6
4
7
8
9
5
q;
6
3
2
Example of folder  structure  and  playing
order
The playing order of the folders and files is as follows:
Folder
MP3 file
Notes
¥ A folder  that  does  not
include an MP3 file is
skipped.
¥ Maximum folder number:
255
Maximum file number: 255
¥ Folder names  and file
names can be displayed
with up  to 8 characters.
¥ The characters  A - Z,
0 - 9, and  _ can  be
displayed on this player.
Other characters  are
displayed as  - .
¥ The file name  does  not
correspond to 
the ID 
tag.
6
CFD-S40CP
30
Notes
¥ The file 
names and folder names must be ISO
9660 level 1 compliant.
¥ When naming, be sure to add the file extension
mp3  to the  file name.
¥ If you put the extension  mp3  to a file other
than MP3, the player cannot  recognize  the file
properly and will generate  random  noise that
could damage  your speakers.
¥ The file name  does  not correspond  to the ID tag.
THE USABLE NUMBER OF
FOLDERS/FILES
¥ Maximum folder number:  255
¥ Maximum file number:  255
SETTINGS FOR COMPRESSION
SOFTWARE AND  WRITING
SOFTWARE
¥ To compress  a source  for an MP3 file, we
recommend setting the transfer bit 
rate of
the compression  software  to 
44.1 kHz ,
128kbps , and  Constant Bit Rate .
¥ To record up to the maximum capacity, set
to the  halting  of writing .
¥ To record  at one time up to the maximum
capacity on media that has nothing
recorded it, set to  Disc at Once .
NOTES FOR SAVING FILES ON
THE MEDIA
When the disc is inserted,  the player reads
all the  files on  that  disc.   If there  are  many
folders or non-MP3 files on the disc, it may
take a long time for play to begin or for the
next MP3 file to start play.
Do not save  unnecessary  folders  or files
other than MP3 ones  in the disc to be used
for MP3  listening.
We recommend that you do not save other
types files or unnecessary  folders on a disc
that has  MP3 files.
About “MP3”
What is the MP3?
MP3 (MPEG 1 Audio Layer-3)  is a standard
technology and format for compressing  a
sound sequence.  The file is compressed  to
about 1/10 of its original size. Sounds
outside the range of human hearing are
compressed while the sounds we can hear
are not compressed.
Playable “MP3” files on this
player
You can only play MP3 files recorded  by
following requirements.
USABLE MEDIA
CD-Rs and CD-RWs
USABLE DISC FORMAT
You can use  ISO 9660 Level 1 format discs,
not including the  expanded  format.  In
some cases,  MP3 files that are recorded  in a
format other than ISO 9660 Level 1 may not
play normally or the file and folder names
may not be displayed  correctly.
The major specifications  of the ISO 9660
Level 1 format are as follows:
¥ Maximum directory steps:   8
¥ Usable characters  for a file/folder name:
A - Z, 0  - 9,  _  (underscore)
¥ Maximum  number  of characters  for a  file
name: 12 including quotation marks and a
3-character extension code 
  
7
CFD-S40CP
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. CABINET (FRONT) ASSY, CABINET (REAR)
z
 
The equipment can be removed using the following procedure.
Set
Cabinet (rear) 
Cabinet (upper) ASSY
Control board
Main board
CD board
LCD board (with lamp board)
Tuner board
Power ASSY, Battery board, Battery common board
Headphone board
Cabinet (front) ASSY
M321 (Capstan/reel motor), Belt, HRP301 Head magnetic (Record/play back), HE301 Head (Erase)
Optical pick-up block, Mechanism deck, CD motor board, TC board
Lid, battery case
2
 Screws
    (+BVTP 3 
× 14)
6
 Connector 
(from Headphone board CNP306)
Cabinet (rear)
7
 Cabinet (front) ASSY
5
 Cable, flexible flat
(from Main board CNP801)
2
 Screws
    (+BVTP 3 
× 14)
3
 Screws
    (+BVTP 3 
× 14)
1
4
8
CFD-S40CP
3-2. CONTROL BOARD
3-3. HEADPHONE BOARD
4
 Screws
    (+BVTP 2.6 
× 10)
4
 Screws
    (+BVTP 2.6 
× 10)
1
 Dial, jog
2
 Hexagonal nut
3
 Washer
6
 Control board
Cabinet (front) ASSY
5
 PWB, retainer
4
 PWB, retainer
1
 Remove solder (two places)
2
 Remove solder 
(two places)
3
 Screw
(+BVTP 2.6 x 10)
5
 Headphone board
Cabinet (front) ASSY
Page of 56
Display

Click on the first or last page to see other CFD-S40CP service manuals if exist.