Sony CFD-S26 Service Manual ▷ View online
4
CFD-S26
CHUCK PLATE JIG ON REPAIRING
On repairing CD section, playing a disc without the lid (CD), use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
SECTION 1
SERVICING NOTES
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
1. Turn ON the POWER button and press FUNCTION button to
CHECK
1. Turn ON the POWER button and press FUNCTION button to
CD position.
2. Open the lid (CD).
3. Turn on S801 with screwdriver, etc. as following figure.
4. Press the CD N X button.
5. Confirm the laser diode emission while observing the objecting
3. Turn on S801 with screwdriver, etc. as following figure.
4. Press the CD N X button.
5. Confirm the laser diode emission while observing the objecting
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Objective lens moves up and down three times for focus search.
Optical Pick-up is broken.
Objective lens moves up and down three times for focus search.
S801
– MAIN BOARD (component side) –
MAIN Board Part No.
Former type : 1-679-963-12
New type : 1-679-963-14
Former type : 1-679-963-12
New type : 1-679-963-14
NOTE ON PERFORMING SERVICE AND INSPECTION
The main, CD, control (1), control (2), control (3), battery terminal (1), battery terminal (2), power (1) and power (2) board have two types,
former type and new type.
When performing service and inspection, check the part number on the main, CD, control (1), control (2), control (3), battery terminal (1),
battery terminal (2), power (1) and power (2) board.
former type and new type.
When performing service and inspection, check the part number on the main, CD, control (1), control (2), control (3), battery terminal (1),
battery terminal (2), power (1) and power (2) board.
5
CFD-S26
CONTROL (1) Board Part No.
Former type : 1-679-966-12
New type : 1-679-966-14
Former type : 1-679-966-12
New type : 1-679-966-14
– CONTROL (1) BOARD (component side) –
– CD BOARD (component side) –
CD Board Part No.
Former type : 1-680-943-11
New type : 1-680-943-13
Former type : 1-680-943-11
New type : 1-680-943-13
– CONTROL (2) BOARD (component side) –
CONTROL (2) Board Part No.
Former type : 1-679-967-12
New type : 1-679-967-14
Former type : 1-679-967-12
New type : 1-679-967-14
– CONTROL (3) BOARD (component side) –
CONTROL (3) Board Part No.
Former type : 1-679-968-12
New type : 1-679-968-14
Former type : 1-679-968-12
New type : 1-679-968-14
6
CFD-S26
– BATTERY TERMINAL (1) BOARD (component side) –
BATTERY TERMINAL (1) Board Part No.
Former type : 1-679-964-12
New type : 1-679-964-14
Former type : 1-679-964-12
New type : 1-679-964-14
– BATTERY TERMINAL (2) BOARD (component side) –
BATTERY TERMINAL (2) Board Part No.
Former type : 1-679-965-12
New type : 1-679-965-14
Former type : 1-679-965-12
New type : 1-679-965-14
– POWER (1) BOARD (component side) –
POWER (1) Board Part No.
Former type : 1-679-969-12
New type : 1-679-969-14
Former type : 1-679-969-12
New type : 1-679-969-14
– POWER (2) BOARD (component side) –
POWER (2) Board Part No.
Former type : 1-679-970-12
New type : 1-679-970-14
Former type : 1-679-970-12
New type : 1-679-970-14
7
CFD-S26
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
REC PLAY REW FF STOP/EJECT PAUSE
VOLUME +,–
MEGA BASS
Z
PUSH
OPEN/CLOSE
CD
compartment
compartment
Number buttons for
CD/RADIO DIRECT OPERATION
CD/RADIO DIRECT OPERATION
Tape
compartment
compartment
POWER
SLEEP
N X
x
CD
TAPE
RADIO BAND•
AUTO PRESET
AUTO PRESET
Display
OPR/BATT
indicator
indicator
MODE
i
(headphones) jack
DISPLAY ENT•
MEMORY
MEMORY
TUNE –, +
.
.
,>
Location of controls
Tip
To listen through headphones, connect the headphones to the i (headphones) jack.
To listen through headphones, connect the headphones to the i (headphones) jack.