Sony CFD-S22L / CFD-S32L (serv.man2) Service Manual ▷ View online
– MAIN BOARD (CONDUCTOR SIDE) –
C510
R600
SUPPLEMENT-1
File this supplement with the service manual.
CFD-S22L/S32L
AEP Model
UK Model
SERVICE MANUAL
Subject : 1. Change of CD Board
2. Change of Main Board
(ECN-RCA01778)
IC pin description, block diagram, printed wiring board, schematic diagram of new type, and changed parts list are described in this
Supplement-1.
Refer to original service manual (9-927-692-S) previously issued for the other information.
When performing service and inspection, check the suffix of the part number of the main boards. (There is no compatibility between the
former type and the new one of the CD and MAIN boards.)
Supplement-1.
Refer to original service manual (9-927-692-S) previously issued for the other information.
When performing service and inspection, check the suffix of the part number of the main boards. (There is no compatibility between the
former type and the new one of the CD and MAIN boards.)
The LCD, CONTROL, POWER, SECONDARY, and VOL SEL boards as main and assembly boards are the same as the previous ones
except that the part numbers (and A numbers) are changed.
except that the part numbers (and A numbers) are changed.
The SYSTEM CONTROL IC (IC501) on the MAIN board has two versions.
The part to be mounted differs according to the version. The type of the IC501 should be checked when repairing.
The part to be mounted differs according to the version. The type of the IC501 should be checked when repairing.
FORMER TYPE
NEW TYPE
MAIN BOARD IC501
CXP83620-025Q
CXP83620-026Q
MAIN
C510
10uF 20% 50V
no mount
BOARD
R600
100
5%
1/4W
JW
CD BOARD
R712
68K
5%
1/16W
47K 5% 1/16W
How to identify the IC501 :
Check whether C510 and R600 are mounted or not on the MAIN board.
Check whether C510 and R600 are mounted or not on the MAIN board.
Ver 1.1 2000. 07
– 2 –
• Former type
• New type
TABLE OF CONTENTS
1.
Exploded Views ..................................................................... 3
2.
Electrical Adjustment ............................................................ 4
3.
IC Pin Description ................................................................. 5
4.
Block Diagram –CD Section– ............................................... 7
5.
Printed Wiring Board –CD Section– ..................................... 9
6.
Schematic Diagram –CD Section– ...................................... 11
7.
Printed Wiring Board –Main Section– ................................ 13
8.
Schematic Diagram –Main Section (1/2)– .......................... 15
9.
Schematic Diagram –Main Section (2/2)– .......................... 17
10. IC Block Diagrams .............................................................. 19
11. Electrical Parts List .............................................................. 21
11. Electrical Parts List .............................................................. 21
– MAIN BOARD (COMPONENT SIDE) –
MAIN Board Part No.
Former type : 1-676-528-11
New type : 1-678-107-11
Former type : 1-676-528-11
New type : 1-678-107-11
C510,
R600
R600
– CD BOARD (COMPONENT SIDE) –
CD Board Part No. : 1-676-536-11
– CD BOARD (COMPONENT SIDE) –
CD Board Part No. : 1-678-114-11
R712
– 3 –
* 101
A-3322-561-A MAIN BOARD, COMPLETE (S22L)
* 101
A-3322-603-A MAIN BOARD, COMPLETE (S32L)
116
3-048-457-01 TAPE (CD SHIELD PLATE)
126
1-792-209-11 WIRE, PARALLEL (16 CORE)
* 127
A-3322-451-A CD BOARD, COMPLETE
128
1-792-208-11 WIRE, PARALLEL (17 CORE)
A-3322-814-A MAIN BOARD, COMPLETE (S22L)
A-3322-817-A MAIN BOARD, COMPLETE (S32L)
A-3322-817-A MAIN BOARD, COMPLETE (S32L)
1-792-684-11 WIRE (FLAT TYPE) (16 CORE)
A-3322-672-A CD BOARD, COMPLETE
A-3322-672-A CD BOARD, COMPLETE
1-792-685-11 WIRE (FLAT TYPE) (15 CORE)
Page
FORMER TYPE
NEW TYPE
1. EXPLODED VIEWS
!
: indicates changed portion.
52
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
127
#1,#9
#1,#9
#3
#3
MF-S22-117
not supplied
#1,#9
#1,#9
#1,#9
#1,#9
KSM-213CDM
#4
#4
101
135
102
103
104
105
106
107
121
122
123
123
125
125
125
125
124
124
129
130
131
133
134
#5
126
128
@
@
@
#
#
#
– 4 –
RF level :
0.9 - 1.5 Vp-p
0.9 - 1.5 Vp-p
VOLT/DIV : 50 mV (10 : 1 probe in use)
TIME/DIV : 500 nS
TIME/DIV : 500 nS
TAP701
TAP702
TP(RF)
– CD board (conductor side) –
TP
(RF)
CD SECTION
CD section adjustments are done automatically in this set.
In case of operation check, confirm that focus bias.
In case of operation check, confirm that focus bias.
FOCUS BIAS CHECK
1. Connect the oscilloscope between IC701 pin wj (or TP (RF))
and GND on CD board.
2. Insert the disc (YEDS-18). (Part No. : 3-702-101-01)
3. Press the CD N X button.
4. Confirm that the oscilloscope waveform is as shown in the
3. Press the CD N X button.
4. Confirm that the oscilloscope waveform is as shown in the
figure below. (eye pattern)
A good eye pattern means that the diamond shape ( ) in the
center of the waveform can be clearly distinguished.
A good eye pattern means that the diamond shape ( ) in the
center of the waveform can be clearly distinguished.
• RF signal reference waveform (eye pattern)
Test Point:
When observing the eye pattern, set the oscilloscope for AC range
and raise vertical sensitivity.
and raise vertical sensitivity.
2. ELECTRICAL ADJUSTMENT
