DOWNLOAD Sony CFD-S200L Service Manual ↓ Size: 3.76 MB | Pages: 53 in PDF or view online for FREE

Model
CFD-S200L
Pages
53
Size
3.76 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cfd-s200l.pdf
Date

Sony CFD-S200L Service Manual ▷ View online

2
Battery life
For CD radio cassette-corder:
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 20 h
Tape playback
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 15 h
CD playback
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 7 h
Dimensions
Approx. 386 
×
 166 
×
 252 mm (w/h/d)
(incl. projecting parts)
Mass
Approx. 3.3 kg (incl. batteries)
Supplied accessories
Main lead (1)
Remote control (RMT-CS200AD) (1)
Design and specifications are subject to change without
notice.
CFD-S200L
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
0
  OR  DOTTED  LINE
WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS  WHOSE
PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  MANUAL  OR
IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
CAUTION
Use of controls or adjustments or performance of proce-
dures other than those specified herein may result in haz-
ardous radiation exposure.
Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270˚C during
repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on Chip Component Replacement
Never reuse a disconnected chip component.
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
This Compact Disc player is
classified as a CLASS 1
LASER product.
The CLASS 1 LASER
PRODUCT mark is located
at the bottom.
3
TABLE OF CONTENTS
1. SERVICING NOTES
......................................................... 4
2. GENERAL
............................................................................ 5
3. DISASSEMBLY
3-1.   Cabinet Top Assy ................................................................ 7
3-2.   Cabinet Front Assy, Cabinet Rear Assy .............................. 7
3-3.   Wires ................................................................................... 8
3-4.   MD Block ............................................................................ 8
3-5.   Cassette Door Assy ............................................................. 9
3-6.   LCD Board, Control (4) Board ........................................... 9
3-7.   Main Board ....................................................................... 10
3-8.   Tuner Board ....................................................................... 10
3-9.   Power Board ...................................................................... 11
3-10. CD Lid ............................................................................... 11
3-11. CD Block Assy .................................................................. 12
3-12. Optical Pick-up ................................................................. 12
3-13. R/P Head (HRP301), TC Board ........................................ 13
3-14. Motor Assy (M801), Main Belt (B), Sub Belt (B) ............ 13
4. MECHANICAL ADJUSTMENTS
............................... 14
5. ELECTRICAL ADJUSTMENTS
Tape Section .......................................................................... 14
Tuner Section ......................................................................... 15
CD Section ............................................................................ 16
6. DIAGRAMS
6-1.   IC Pin Description ............................................................. 17
6-2.   Circuit Boards Location .................................................... 17
6-3.   Block Diagram – CD Section – ......................................... 18
6-4.   Block Diagram – Main Section – ...................................... 19
6-5.   Printed Wiring Board – CD Section – ............................... 20
6-6.   Schematic Diagram – CD Section – .................................. 21
6-7.   Printed Wiring Board – Tuner Section – ........................... 22
6-8.   Schematic Diagram – Tuner Section – .............................. 23
6-9.   Printed Wiring Boards – Main Section – .......................... 24
6-10. Schematic Diagram – Main Section (1/2) – ...................... 25
6-11. Schematic Diagram – Main Section (2/2) – ...................... 26
6-12. Printed Wiring Board – TC Section – ............................... 27
6-13. Schematic Diagram – TC Section – .................................. 28
6-14. Printed Wiring Boards – Control Section – ....................... 29
6-15. Schematic Diagram – Control Section – ........................... 30
6-16. Printed Wiring Boards – Display Section – ...................... 31
6-17. Schematic Diagram – Display Section – ........................... 32
6-18. Printed Wiring Boards – Power Supply Section – ............ 33
6-19. Schematic Diagram – Power Supply Section – ................. 34
6-20. IC Block Diagrams ............................................................ 35
7. EXPLODED VIEWS
7-1.   Main Section ..................................................................... 38
7-2.   Cabinet Front Section ........................................................ 39
7-3.   Cabinet Top Section .......................................................... 40
7-4.   Cabinet Rear Section ......................................................... 41
7-5.   Tape Mechanism Section .................................................. 42
7-6.   CD Mechanism Section .................................................... 43
8. ELECTRICAL PARTS LIST
......................................... 44
CFD-S200L
4
CFD-S200L
CHUCK PLATE JIG ON REPAIRING
On repairing CD section, playing a disc without the lid (CD), use
Chuck Plate Jig.
• Code number of Chuck Plate Jig: X-4918-255-1
SECTION 1
SERVICING NOTES
LASER  DIODE  AND  FOCUS  SEARCH  OPERATION
CHECK
1. Turn ON the [OPERATE] button and press [CD] button to CD
position.
2. Open the CD lid.
3. Turn on S801 with screwdriver, etc. as following figure.
4. Press the  N X  (CD) button.
5. Confirm the laser diode emission while observing the objecting
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Objective lens moves up and down three times for focus search.
S801
5
CFD-S200L
SECTION 2
GENERAL
This section is extracted
from instruction manual.
Remote Control (CFD-S200L only)
Mando a distancia (sólo CFD-S200L)
Location of controls/Ubicación de los controles
FUNCTION
BAND
OPERATE
(POWER)
VOL –,+*
x
.
,
>
PRESET –,+
Total track number
Número total de pistas
Programmed track
Pista programada
Playing order
Orden de reproducción
Total playing time
Tiempo total de reproducción
Display/Visor
OPERATE
(POWER)
Loading a CD
Carga de un CD
With the labeled side up
Con la cara etiquetada hacia arriba
Inserting a cassette
Inserción de casetes
With the side you want to play
facing you
Con la cara que desee reproducir
mirando hacia usted
*The button has a tactile dot.
*El botón tiene un punto táctil.
MEGA BASS
VOL +*, –
.
>
TUNE –, +
DISPLAY
ENT
MEMORY
MODE
i
Number buttons
Botones numéricos
x
u
*
SLEEP
OPR/BATT
CD
RADIO BAND
AUTO  PRESET
TAPE
Display
Visor
Remote sensor
(CFD-S200L only)
Sensor de control remoto
(sólo CFD-S200L)
*
Z
 PUSH
OPEN/CLOSE
u
Page of 53
Display

Sony CFD-S200L Service Manual ▷ Download

  • DOWNLOAD Sony CFD-S200L Service Manual ↓ Size: 3.76 MB | Pages: 53 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony CFD-S200L in PDF for free, which will help you to disassemble, recover, fix and repair Sony CFD-S200L Audio. Information contained in Sony CFD-S200L Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.