Sony CFD-G550CP Service Manual ▷ View online
5
CFD-G550CP
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
4
Playing an audio CD or MP3 files
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press Z PUSH OPEN/CLOSE to
open the CD compartment and place
a CD on the CD compartment.
open the CD compartment and place
a CD on the CD compartment.
3
Press Z PUSH OPEN/CLOSE to
close the CD compartment.
close the CD compartment.
With the label side up
1
4
2, 3
Basic Operations
Basic
Operations
5
Display
Playing
time
time
Track
number
number
To
Press
adjust the volume
VOL +*, –
stop playback
x
pause playback
u* (X on the remote)
Press the button again to
resume play after pause.
Press the button again to
resume play after pause.
go to the next track
>
go back to the previous track
.
remove the CD
Z PUSH OPEN/CLOSE**
turn on/off the player
POWER
* The button has a tactile dot.
**Once you open the CD compartment, the track to start play will
**Once you open the CD compartment, the track to start play will
change to the beginning of the first track.
Tip
Playback starts from the
track you last stopped
playing (Resume play).
During stop, the track
number to be played is
displayed.
To cancel the resume play
to start play from the
beginning of the first track,
press x in stop mode.
track you last stopped
playing (Resume play).
During stop, the track
number to be played is
displayed.
To cancel the resume play
to start play from the
beginning of the first track,
press x in stop mode.
u
POWER
VOL +, –
x
Z PUSH
OPEN/CLOSE
OPEN/CLOSE
continued
4
Press u (N on the remote).
The player plays all the tracks once.
To play a CD with MP3 files, see
page 6.
page 6.
Use these buttons for additional operations
., >
6
Note
Before playing a file, this
player reads all file and
folder information on the
CD. Depending on the file
structure, it may take more
than a minute to read them.
During this time,
“READING” is displayed.
player reads all file and
folder information on the
CD. Depending on the file
structure, it may take more
than a minute to read them.
During this time,
“READING” is displayed.
Tip
You can use the buttons
mentioned in the table on
page 5 for additional
operations in the same way
as when playing an audio
CD.
mentioned in the table on
page 5 for additional
operations in the same way
as when playing an audio
CD.
Playing a CD with MP3 files
1
Press POWER to turn on the player.
2
Press Z PUSH OPEN/CLOSE to open the CD
compartment and place a CD on the CD compartment
(see page 4) .
compartment and place a CD on the CD compartment
(see page 4) .
3
Press Z PUSH OPEN/CLOSE to close the CD
compartment.
compartment.
4
Press u (N on the remote).
The player plays all MP3 files on the CD.
When you play a CD with MP3 files, “MP3” appears
in the display.
The player plays all MP3 files on the CD.
When you play a CD with MP3 files, “MP3” appears
in the display.
To select a folder
Press FOLDER + to go forward and – to go backward.
Press FOLDER + to go forward and – to go backward.
To select a file
Press > to go forward and . to go backward.
Press > to go forward and . to go backward.
Track number
u
., >
POWER
After the file name is
displayed, the playing time
will appear
displayed, the playing time
will appear
Z PUSH
OPEN/CLOSE
OPEN/CLOSE
Playing an audio CD or MP3 files (continued)
FOLDER –, +
Basic
Operations
7
Example of folder structure and playing
order
The playing order of the folders and files is as follows:
The playing order of the folders and files is as follows:
Notes
• A folder that does not
• A folder that does not
include an MP3 file is
skipped.
skipped.
• Maximum number of
folders: 255
Maximum number of files:
255
Maximum number of files:
255
• Folder names and file
names can be displayed
with up to 64 characters.
with up to 64 characters.
• The characters A - Z, a - z,
0 - 9, and _ can be
displayed on this player.
Other characters are
displayed as “*”.
displayed on this player.
Other characters are
displayed as “*”.
• This player conforms to
Version 1.1 of the ID3 tag
format. If the file has the
ID3 tag information, “song
title”, “artist name” and
“album name” can be
displayed.
format. If the file has the
ID3 tag information, “song
title”, “artist name” and
“album name” can be
displayed.
About CD-Rs/CD-RWs and MP3 files
This player can play CD-Rs/CD-RWs recorded in the CD-
DA format* and MP3 files recorded in the CD-ROM
format, but playback capability may vary depending on the
quality of the disc and the condition of the recording
device.
This player can play CD-Rs/CD-RWs recorded in the CD-
DA format* and MP3 files recorded in the CD-ROM
format, but playback capability may vary depending on the
quality of the disc and the condition of the recording
device.
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is
a recording standard used for Audio CDs.
CD-R
CD-RW
CD-RW
3
2
1
2
4
5
3
6
7
8
4
9
5
0
6
1
MP3 file
Folder
6
CFD-G550CP
8
Listening to the radio
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press RADIO BAND•AUTO
PRESET (BAND on the remote)
until the band you want appears in
the display.
Each time you press the button, the
indication changes as follows:
“FM” t “AM”.
PRESET (BAND on the remote)
until the band you want appears in
the display.
Each time you press the button, the
indication changes as follows:
“FM” t “AM”.
3
Hold down TUNE + or – until the
frequency digits begin to change in
the display.
frequency digits begin to change in
the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
TUNE + or – repeatedly to change
the frequency step by step.
TUNE + or – repeatedly to change
the frequency step by step.
2
1
Display
Indicates an FM stereo
broadcast
broadcast
3
Basic
Operations
9
Use these buttons for additional operations
Tip
If the FM broadcast is
noisy, press MODE until
“Mono” appears in the
display and radio will play
in monaural.
noisy, press MODE until
“Mono” appears in the
display and radio will play
in monaural.
To
Press
adjust the volume
VOL +*, –
turn on/off the radio
POWER
*VOL + has a tactile dot.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
Reorient the antenna for FM. Reorient the player itself for
AM.
POWER
VOL +, –
MODE
for FM
for AM
10
Playing a tape
2
3
Display
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press xZ to open the tape
compartment and insert a recorded
tape. Close the compartment. Use
TYPE I (normal) tape only.
compartment and insert a recorded
tape. Close the compartment. Use
TYPE I (normal) tape only.
3
Press N*.
The player starts playing.
1
With the side you want
to play facing upward
to play facing upward
Basic
Operations
11
Use these buttons for additional operations
To
Press
adjust the volume
VOL +*, –
stop playback
xZ
fast-forward or rewind
M or m
pause playback
X
Press the button again to resume
play after pause.
play after pause.
eject the cassette
xZ
turn on/off the player
POWER
*VOL + and N have a tactile dot.
xZ
X
m, M
POWER
VOL +, –
7
CFD-G550CP
12
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
Close the compartment.
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
Close the compartment.
3
Select the program source you want
to record.
to record.
To record from the CD player, press
x and load a CD (see page 4).
x and load a CD (see page 4).
To record from the radio, press
RADIO BAND•AUTO PRESET and
tune in the station you want (see page
8).
RADIO BAND•AUTO PRESET and
tune in the station you want (see page
8).
Recording on a tape
3
1
With the side you want to
record on facing upward
record on facing upward
Display
2
4
Basic Operations
13
To
Press
stop recording
xZ
pause recording
X
Press the button again to
resume recording.
resume recording.
turn on/off the player
POWER
4
Press z to start recording
(N is depressed automatically).
(N is depressed automatically).
Use these buttons for additional operations
Tips
• Adjusting the volume or the
• Adjusting the volume or the
audio emphasis (see page
21) will not affect the
recording level.
21) will not affect the
recording level.
• For the best results, use the
AC power as a power
source for recording.
source for recording.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press X.
3 Press z. (N
3 Press z. (N
is depressed
automatically.)
4 Press X.
X
POWER
xZ
z
14
The CD Player
Using the display
You can check information about the CD
using the display.
using the display.
DISPLAY
ENTER
MEMORY
ENTER
MEMORY
Total playing time
Total track number
Total track number
Total folder number
t
Checking the information of
an audio CD
an audio CD
To check the total track number
and playing time of the CD
While the CD is stopped, you can check
them in the display.
While the CD is stopped, you can check
them in the display.
To check the remaining time
Press DISPLAY•ENTER•MEMORY while
playing a CD. The display changes as
follows:
Press DISPLAY•ENTER•MEMORY while
playing a CD. The display changes as
follows:
The current track number and playing
time
time
r
The current track number and the
remaining time of the current track
remaining time of the current track
r
The number of tracks left and the time
remaining on the CD
remaining on the CD
t
Checking the information of a
CD with MP3 files
CD with MP3 files
To check the total folder number
and total track number on the
CD
While the CD is stopped, you can check
them in the display.
While the CD is stopped, you can check
them in the display.
To check file information
Press DISPLAY•ENTER•MEMORY while
playing an MP3 file. The display changes as
follows:
Press DISPLAY•ENTER•MEMORY while
playing an MP3 file. The display changes as
follows:
The current track number and playing
time
time
r
The current track number and the file
name
name
r
The folder number and the folder name*
r
The current track number and ID3: the
song title / the artist name / the album
name**
song title / the artist name / the album
name**
* If the folder does not have a folder name,
“ROOT” appears instead of a folder name.
**If the file does not have ID3 information, “NO
TITLE”, “NO ARTIST” or “NO ALBUM”
appears in the display.
appears in the display.
15
The
CD Player
Locating a specific
track
track
You can quickly locate any track on a CD
using the number buttons on the remote.
You can also find a specific point in a track
while playing a CD.
using the number buttons on the remote.
You can also find a specific point in a track
while playing a CD.
To locate
Press
a specific track
the number button of the track
directly
a point while
> (forward) or .
listening to
(backward) while playing and
the sound
hold it until you find the point
a point while
> (forward) or .
observing
(backward) in pause and hold
the display
it until you find the point
., >
Number
buttons
buttons
Notes
• Locating a specific track using the number
• Locating a specific track using the number
buttons is only available for the tracks in the
selected folder.
selected folder.
• You cannot locate a specific track if "SHUF" or
"PGM" is lit in the display. Turn off the
indication by pressing x.
indication by pressing x.
Tips
• When you locate a track numbered over 10,
• When you locate a track numbered over 10,
press >10 first, then the corresponding number
buttons.
Example: To play track number 23, press >10
first, then 2 and 3.
buttons.
Example: To play track number 23, press >10
first, then 2 and 3.
• To select a track numbered over 100 or more,
press >10 twice, then the corresponding number
buttons.
buttons.
8
CFD-G550CP
• The equipment can be removed using the following procedure.
SECTION 3
DISASSEMBLY
3-1.
CABINET (UPPER) (1) SECTION
(Page 9)
(Page 9)
3-2.
CABINET (UPPER) (2) SECTION
(Page 9)
(Page 9)
SET
3-3.
CABINET (FRONT) SECTION
(Page 10)
(Page 10)
3-7.
CONTROL 1 BOARD
(Page 12)
(Page 12)
3-12. TAPE MECHANISM DECK
(Page 14)
3-13. TC BOARD
(Page 15)
3-14. MAIN BELT,
SUB BELT
(Page 15)
(Page 15)
3-8.
H/P BOARD,
TU BOARD
(Page 12)
TU BOARD
(Page 12)
3-9.
MAIN BOARD
(Page 13)
(Page 13)
3-10. CD BLOCK SECTION
(Page 13)
3-11. OPTICAL PICK-UP
(Page 14)
3-4.
CONTROL 2 BOARD,
VOL BOARD
(Page 10)
VOL BOARD
(Page 10)
3-5.
LCD BOARD
(Page 11)
(Page 11)
3-6.
POWER BOARD,
TRANS BOARD
(Page 11)
TRANS BOARD
(Page 11)
Click on the first or last page to see other CFD-G550CP service manuals if exist.