Sony CFD-EX35L Service Manual ▷ View online
3
CFD-EX35L
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe more than 30 cm away from the objective lens.
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe more than 30 cm away from the objective lens.
CHUCK PLATE JIG ON REPAIRING
On repairing CD section, playing a disc without the CD lid, use
Chuck Plate Jig.
• Code number of Chuck Plate Jig : X-4918-255-1
Chuck Plate Jig.
• Code number of Chuck Plate Jig : X-4918-255-1
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
CHECK
1.
Press CD open knob.
2.
Open the lid for CD.
3.
Push on SWITCH (S801) as following figure.
4.
Confirm the laser diode emission while observing the objecting
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Objective lens moves up and down once for the focus search.
lens. When there is no emission, Auto Power Control circuit or
Optical Pick-up is broken.
Objective lens moves up and down once for the focus search.
Insert a precision
screw driver and push
SWITCH (S801)
screw driver and push
SWITCH (S801)
4
CFD-EX35L
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Location of controls/Ubicación de los controles
Total track number
Número total de pistas
Número total de pistas
Programmed track
Pista programada
Pista programada
Playing order
Orden de reproducción
Orden de reproducción
Total playing time
Tiempo total de reproducción
Tiempo total de reproducción
Display/Visor
Remote Control
Mando a distancia
Mando a distancia
FUNCTION
BAND
OPERATE
(POWER)
(POWER)
VOL +*, –
x
.
,
>
Z
PUSH
OPEN/CLOSE
VOLUME –, +*
TUNE –, +
DISPLAY
ENTER
MEMORY
ENTER
MEMORY
MODE
i
Number buttons
Botones
numéricoss
x
u
*
SLEEP
OPR/BATT
Loading a CD
Carga de un CD
Carga de un CD
With the labeled side up
Con la cara etiquetada hacia arriba
Con la cara etiquetada hacia arriba
Inserting a cassette
Inserción de casetes
Inserción de casetes
With the side you want to play
facing upward
Con la cara que desee reproducir
mirando hacia arriba
facing upward
Con la cara que desee reproducir
mirando hacia arriba
BAND
AUTO PRESET
AUTO PRESET
SOUND
Display
Visor
Visor
Remote sensor
Sensor de control remoto
Sensor de control remoto
*The button has a tactile dot.
*El botón tiene un punto táctil.
*El botón tiene un punto táctil.
POWER DRIVE
WOOFER
WOOFER
.
,
>
PRESET –, +
X
SLEEP
MODE
TUNE+, –
WOOFER
SOUND
OPERATE
(POWER)
(POWER)
N
About CD-Rs/CD-RWs
This player can play CD-Rs/CD-RWs
recorded in the CD-DA format*, but
playback capability may vary depending on
the quality of the disc and the condition of
the recording device.
recorded in the CD-DA format*, but
playback capability may vary depending on
the quality of the disc and the condition of
the recording device.
* CD-DA is the abbreviation for Compact
Disc Digital Audio. It is a recording
standard used for Audio CDs.
standard used for Audio CDs.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
concerning your player, please consult your
nearest Sony dealer.
D
E
5
CFD-EX35L
SECTION 3
DISASSEMBLY
•
The equipment can be removed using the following procedure.
3-1. Cabinet (Front) Assy- 1
Note :
Follow the disassembly procedure in the numerical order given.
CABINET (FRONT) ASSY-1
(page 5)
CABINET (FRONT) ASSY-2
(page 6)
PANEL ASSY
(page 7)
LCD BOARD, PANEL (UPPER)
(page 7)
CONTROL
(POWER),
CONTROL
(CD),
HEADPHONE
BOARD
(page 6)
PANEL (UPPER)
ASSY-1
(page 8)
PANEL (UPPER)
ASSY-2
(page 8)
POWER, TRANS
BOARD
(page 9)
TUNER
BOARD
, DUCT (
UPPER
, LOWER)
(page 9)
BATT COM, BATT
BOARD
(page 10)
MAIN
BOARD
-1
(page 10)
MAIN
BOARD
-2
(page 11)
PDW, L-R/REG
BOARD
(page 12)
MECHANISM DECK SECTION (MF-V5-117)
(page 11)
CD BLOCK SECTION (KSM-213RDP)
(page 12)
Set
2
t
wo screws
+BVTP 3
×
20
3
e
ight screws
+BVTP 3
×
14
5
s
crew
+BVTP 3
×
10
4
Open the CD lid in the
direction of the arrow.
1
Remove the battery case lid
in the direction of the arrow.
detal view
6
CFD-EX35L
3-3. CONTROL (POWER) , CONTROL (CD) , HEADPHONE Board
3-2. Cabinet (Front) Assy- 2
1
Remove the cabinet (front) assy
in the direction of the arrow.
4
CNP391
(from PWD board KH353)
5
CNP393
(from L-R/REG board KH374)
3
f
lexible flat cable
(from MAIN board CNP801)
2
f
lexible flat cable
(from MAIN board CNP804)
MAIN board
HEADPHONE board
1
t
wo screws
+BVTP 2.6
×
10
3
s
crew
+BVTP 3
×
10
5
t
wo screws
+BVTP 2.6
×
10
6
CONTROL
(CD) board,
button (CD)
4
HEADPHONE
board
2
CONTROL
(POWER) board,
button (power)
