Sony CFD-E90 Service Manual ▷ View online
5
CFD-E90
ORIGINAL TYPE
(US, E model)
LIV TYPE
(US model)
PSYC TYPE
(US, Canadian model)
– CD LID Top View –
[MODEL IDENTIFICATION]
The CDF-E90 is available with three types and five defferent color variations.
How to identify the destination, type, and color variation is shown below.
How to identify the destination, type, and color variation is shown below.
– COLOR VARIATION –
ORIGINAL TYPE
LIV TYPE
PSYC TYPE
WHITE
SILVER
PINK
WHITE
WHITE
BLACK
US model
a
–
a
a
a
a
Canadian model
–
–
–
–
a
a
E model
–
a
–
–
–
–
Ver. 1.3
6
CFD-E90
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
4
Connect the supplied AC power cord.
1
Press ZPUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
to open the CD compartment and
place the CD on the CD
compartment.
2
Close the lid of the CD compartment.
3
Press u.
The player turns on (direct power-on)
and plays all the tracks once.
The player turns on (direct power-on)
and plays all the tracks once.
Basic Operations
3
Playing a CD
Display
With the label side up
1, 2
Playing time
Track number
Basic Operations
5
Use these buttons for additional operations
POWER
x
u
Jog dial
VOLUME +, —
Z
PUSH
OPEN/CLOSE
To
Do this
adjust the volume
Press VOLUME +*, — (VOL +, —
on the remote).
on the remote).
stop playback
Press x.
pause playback
Press u*.
Press the button again to resume
play after pause.
Press the button again to resume
play after pause.
go to the next track
Turn the jog dial clockwise.
(On the remote, press >.)
(On the remote, press >.)
go back to the previous track Turn the jog dial counterclockwise.
(On the remote, press ..)
remove the CD
Press ZPUSH OPEN/CLOSE.
turn on/off the player
Press POWER.
* The button has a tactile dot.
6
Listening to the radio
Connect the supplied AC power cord.
1
Press RADIO¥BAND¥AUTO
PRESET until the band you want
appears in the display (direct power-
on).
PRESET until the band you want
appears in the display (direct power-
on).
2
Hold down TUNE + or TUNE — until
the frequency digits begin to change
in the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
the button repeatedly to change the
frequency step by step.
the frequency digits begin to change
in the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
the button repeatedly to change the
frequency step by step.
Display
Indicates an FM stereo
broadcast
1
2
Basic Operations
7
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +*, —
(VOL +, — on the remote)
(VOL +, — on the remote)
turn on/off the radio
POWER
* VOLUME + has a tactile dot.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
Reorient the antenna for FM. Reorient the player itself for
AM.
for FM
for AM
Tip
If the FM broadcast is
noisy, press MODE until
noisy, press MODE until
Mono appears in the
display and the radio will
play in monaural.
play in monaural.
POWER
VOLUME +, —
MODE
7
CFD-E90
8
Playing a tape
Connect the supplied AC power cord.
1
Press xZ to open the tape
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
2
Press n.
The player turns on (direct power-on)
and starts playing.
The player turns on (direct power-on)
and starts playing.
With the side you want
to play facing you
Display
2
1
Basic Operations
9
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +*, —
(VOL +, — on the remote)
(VOL +, — on the remote)
stop playback
xZ
fast-forward or rewind the tape
m
or M
pause playback
X
Press the button again to
resume play after pause.
resume play after pause.
eject the cassette
xZ
turn on/off the player
POWER
* VOLUME + and n have a tactile dot.
xZ
X
m
, M
POWER
VOLUME +, —
10
Recording on a tape
Connect the supplied AC power cord.
1
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
2
Select the program source you want
to record.
To record from the CD player, insert
a CD and press x on the CD section.
to record.
To record from the CD player, insert
a CD and press x on the CD section.
To record from the radio, tune in the
station you want.
station you want.
3
With the side you want to
record on facing you
Display
1
Basic Operations
11
3
Press z to start recording
(n is depressed automatically).
(n is depressed automatically).
Use these buttons for additional operations
Tips
¥ Adjusting the volume or the
audio emphasis will not
affect the recording level.
affect the recording level.
¥ If the AM program makes a
whistling sound after you’ve
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
¥ For the best results, use the
AC power as a power
source.
source.
¥ To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press FUNCTION on the
remote repeatedly until
TAPE appears.
3 Press z.
xZ
X
POWER
MODE
n
To
Press
stop recording
xZ
pause recording
X
Press the button again to resume
recording.
recording.
turn on/off the player
POWER
¥ If the AM program makes a
whistling sound after you’ve
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
¥ For the best results, use the
AC power as a power
source.
source.
¥ To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press FUNCTION on the
remote repeatedly until
TAPE appears.
3 Press z.
8
CFD-E90
The Timer
19
Before you set the clock, connect the power
source.
source.
1
Hold down CLOCK/SLEEP/TIMER
until CLOCK appears in the display.
The hour digit flashes.
until CLOCK appears in the display.
The hour digit flashes.
2
Turn the jog dial to set the current hour.
Then press ENTER.
The minute digits flash. Set the minutes
by turning the jog dial until the correct
minute is displayed.
Then press ENTER.
The minute digits flash. Set the minutes
by turning the jog dial until the correct
minute is displayed.
The Timer
Setting the clock
— —:— — indication appears in the display
until you set the clock.
3
Press ENTER.
The clock starts from 00 seconds.
The clock starts from 00 seconds.
Tip
The time display system: 12-hour system
AM 12:00 = midnight
PM 12:00 = noon
The time display system: 12-hour system
AM 12:00 = midnight
PM 12:00 = noon
CLOCK/SLEEP/TIMER
ENTER
Jog dial
Click on the first or last page to see other CFD-E90 service manuals if exist.