Sony CFD-E75 Service Manual ▷ View online
5
CFD-E75
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
4
Connect the supplied AC power cord (see page 24).
1
Press ZPUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
compartment.
to open the CD compartment and
place the CD on the CD
compartment.
2
Close the lid of the CD compartment.
3
Press u (N on the remote).
The player turns on (direct power-on)
and plays all the tracks once.
and plays all the tracks once.
Basic Operations
3
Playing a CD
Display
With the label side up
1, 2
PUSH OPEN/CLOSE
PUSH OPEN/CLOSE
Playing time
Track number
Basic Operations
5
Use these buttons for additional operations
POWER
x
u
Jog dial
VOLUME +, —
Z
PUSH
OPEN/CLOSE
To
Do this
adjust the volume
Press VOLUME +, — (VOL +, — on
the remote).
the remote).
stop playback
Press x.
pause playback
Press u (X on the remote).
Press the button again to resume
play after pause.
Press the button again to resume
play after pause.
go to the next track
Turn the jog dial clockwise.
(On the remote, press >.)
(On the remote, press >.)
go back to the previous track Turn the jog dial counterclockwise.
(On the remote, press ..)
remove the CD
Press ZPUSH OPEN/CLOSE.
turn on/off the player
Press POWER.
About CD-Rs/CD-RWs
This player is compatible with CD-Rs/CD-RWs but
playback capability may vary depending on the quality of
the disc, the recording device and application software.
This player is compatible with CD-Rs/CD-RWs but
playback capability may vary depending on the quality of
the disc, the recording device and application software.
6
Listening to the radio
Connect the supplied AC power cord (see page 24).
1
Press RADIO BAND¥AUTO
PRESET until the band you want
appears in the display (direct power-
on).
PRESET until the band you want
appears in the display (direct power-
on).
2
Hold down TUNE + or — until the
frequency digits begin to change in
the display.
frequency digits begin to change in
the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
radio frequencies and stops when it
finds a clear station.
If you can't tune in a station, press
the button repeatedly to change the
frequency step by step.
the button repeatedly to change the
frequency step by step.
Display
Indicates an FM stereo
broadcast
broadcast
1
2
RADIO
AUTO PRESET
BAND
TUNE
Basic Operations
7
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +, —
(VOL +, — on the remote)
(VOL +, — on the remote)
turn on/off the radio
POWER
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
Reorient the antenna for FM. Reorient the player itself for
AM.
for FM
for AM
Tip
If the FM broadcast is
noisy, press MODE until
noisy, press MODE until
Mono appears in the
display and the radio will
play in monaural.
play in monaural.
POWER
VOLUME +, —
MODE
6
CFD-E75
8
Playing a tape
Connect the supplied AC power cord (see page 24).
1
Press xZ to open the tape
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
2
Press n.
The player turns on (direct power-on)
and starts playing.
and starts playing.
With the side you want
to play facing you
to play facing you
Display
2
1
Basic Operations
9
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +, —
(VOL +, — on the remote)
(VOL +, — on the remote)
stop playback
xZ
fast-forward or rewind the tape
m or M
pause playback
X
Press the button again to
resume play after pause.
resume play after pause.
eject the cassette
xZ
turn on/off the player
POWER
xZ
X
m
, M
POWER
VOLUME +, —
10
Recording on a tape
Connect the supplied AC power cord (see page 24).
1
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
2
Select the program source you want
to record.
to record.
To record from the CD player, insert
a CD (see page 4) and press x on the
CD section.
a CD (see page 4) and press x on the
CD section.
To record from the radio, tune in the
station you want (see page 6).
station you want (see page 6).
3
With the side you want to
record on facing you
record on facing you
Display
1
RADIO
AUTO PRESET
BAND
Basic Operations
11
3
Press z to start recording
(n is depressed automatically).
(n is depressed automatically).
Use these buttons for additional operations
Tips
¥ Adjusting the volume or the
audio emphasis (see page
18) will not affect the
recording level.
18) will not affect the
recording level.
¥ If the AM program makes a
whistling sound after you've
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that decreases the
noise the most.
¥ For the best results, use the
AC power as a power
source.
source.
¥ To erase a recording,
proceed as follows:
1 Insert the tape whose
1 Insert the tape whose
recording you want to
erase.
erase.
2 Press X.
3 Press n.
4 Press z.
5 Press X.
3 Press n.
4 Press z.
5 Press X.
xZ
X
POWER
MODE
n
To
Press
stop recording
xZ
pause recording
X
Press the button again to resume
recording.
recording.
turn on/off the player
POWER
7
CFD-E75
The Timer
19
Before you set the clock, connect the power
source (see page 24).
source (see page 24).
1
Press MENU¥ALARM until CLOCK
appears in the display, then press
DSPL¥ENT MEM.
appears in the display, then press
DSPL¥ENT MEM.
The hour digit flashes.
2
Turn the jog dial to set the current hour.
Then press DSPL¥ENT MEM.
Then press DSPL¥ENT MEM.
The minute digits flash. Set the minutes
by turning the jog dial until the correct
minute is displayed.
by turning the jog dial until the correct
minute is displayed.
The Timer
Setting the clock
— —:— — indication appears in the display
until you set the clock.
DSPL
ENT MEM
ENT MEM
Jog dial
3
Press DSPL¥ENT MEM.
The clock starts from 00 seconds.
Tip
The time display system: 12-hour system
AM 12:00 = midnight
PM 12:00 = noon
AM 12:00 = midnight
PM 12:00 = noon
MENU
ALARM
ALARM
8
CFD-E75
• This set can be disassembled in the order shown below.
SECTION 3
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
3-2.
CABINET LOWER ASSY
3-1.
DISASSEMBLY FLOW
Cabinet lower assy
Set
AC INLET board, POWER board
TUNER board, MAIN board
Cover plate assy
CD mechanism deck
(KSM-213CDP)
(KSM-213CDP)
Optical pick-up
(KSS-213C)
(KSS-213C)
Cabinet front assy
Tape mechanism deck
(MF-V5-117)
(MF-V5-117)
CD lid
Lid cassette assy,
LCD board
LCD board
Head (HRP301),
motor assy (M301), belt
motor assy (M301), belt
1
two screws
(BVTP3
(BVTP3
×
14)
2
four screws
(BVTP3
(BVTP3
×
10)
3
5
4
two screws
(BVTP3
(BVTP3
×
14)
6
connector
(CN322)
(CN322)
7
connector
(CNP392)
(CNP392)
8
cabinet lower assy
4
screw
(BVTP3
(BVTP3
×
14)
Click on the first or last page to see other CFD-E75 service manuals if exist.