Sony CDP-XB930 / CDP-XB930E Service Manual ▷ View online
6
SECTION 2
GENERAL
1 U (POWER) switch
2 PLAY MODE button
3 REPEAT button
4 FADER button
5 TIME/TEXT button
6 0 button
7 ) button
8 EDIT/TIME FADE button
9 CHECK button
0 CLEAR button
!¡ ≠ AMS ± knob
2 PLAY MODE button
3 REPEAT button
4 FADER button
5 TIME/TEXT button
6 0 button
7 ) button
8 EDIT/TIME FADE button
9 CHECK button
0 CLEAR button
!¡ ≠ AMS ± knob
!™ p (stop) button
!£ P (pause) button
!¢ · (play) button
!∞ § OPEN/CLOSE button
!§ LANGUAGE button
!¶ MUSIC SCAN button
!• AUTO SPACE button
!ª PEAK SEARCH button
@º FILTER switch
@¡ PHONE LEVEL volume (XB930 model)
@™ PHONES jack (XB930 model)
!£ P (pause) button
!¢ · (play) button
!∞ § OPEN/CLOSE button
!§ LANGUAGE button
!¶ MUSIC SCAN button
!• AUTO SPACE button
!ª PEAK SEARCH button
@º FILTER switch
@¡ PHONE LEVEL volume (XB930 model)
@™ PHONES jack (XB930 model)
LOCATION AND FUNCTION OF CONTROLS
[FRONT PANEL]
1
2345
6 7 89!º
!¡
!™
!£
!¢
!∞
@™
@¡
@º
!ª
!•
!¶
!§
7
This section is extracted
from instruction manual.
from instruction manual.
8
SECTION 3
DISASSEMBLY
Note :
Follow the disassembly procedure in the numerical order given.
3-1. SLIDE RACK
3-2. FRONT PANEL
claws
claws
A
2
Slide rack
(Disengage claws
to remove the rack.)
to remove the rack.)
1
Eject CD by moving "A" in
the direction of the arrow.
6
Five screws
(+BV 3
×
8)
7
Front panel
(Disengage claws to remove the rack.)
3
Flat cable
2
Connector
4
Connector
5
Four screws
(+BV 3
×
8)
1
Two connectors
claws
claws
9
When the p button is pressed, the following will be displayed.
(partial lighting 2)
(partial lighting 2)
When the OPEN/CLOSE § button is pressed, all will light up
again.
again.
• Key check
All buttons have corresponding button numbers. When a button
is pressed, the counter will count up and display the button’s
number. However, the counter will only count to “18”. It will
not count for buttons already pressed once, but will display the
button’s number.(Partial lighting 3)
is pressed, the counter will count up and display the button’s
number. However, the counter will only count to “18”. It will
not count for buttons already pressed once, but will display the
button’s number.(Partial lighting 3)
SECTION 4
TEST MODE
4-1. AF MODE
The following checks can be performed in the AF mode, which is
set by connecting the TP51 (AFADJ) terminal on MAIN board to
the Ground and turning on the power.
set by connecting the TP51 (AFADJ) terminal on MAIN board to
the Ground and turning on the power.
• FL tube check
After all segments light up, when the · button is pressed, the
following will be displayed. (Partial lighting 1)
following will be displayed. (Partial lighting 1)
• Remote commander check
When the · button of the remote commander is pressed, the
following will be displayed. All go off when the other buttons
are pressed. (Partial lighting 4)
following will be displayed. All go off when the other buttons
are pressed. (Partial lighting 4)
LANGUAGE
MUSIC SCAN
AUTO SPACE
PEAK SEARCH
PLAY MODE
REPEAT
FADER
TIME/TEXT
0
)
0
1
2
3
4
5
6
7
8
9
EDIT/
TIME FADE
CHECK
CLEAR
P
ENTER
OPEN/CLOSE
§
PLAY ·
STOP p
10
11
12
18
20
ALL lit
Partial lighting 1
Partial lighting 2
Button No.
Displayed
Button No.
Displayed
Button
2
4
6
8
10
12
14
16
18
20
(Partial lighting 2)
• Audio check
• Initial setting of digital filter and release of mute.
• When the TP51 (AFADJ) terminal on MAIN board is set to
• When the TP51 (AFADJ) terminal on MAIN board is set to
HIGH (VDD), emphasis turns on. When set to LOW (Ground),
it turns off.
it turns off.
A B C D E F
(Partial lighting 1)
88 TOTAL 88
Display of
counting
counting
Display of
button number
button number
Â
Â
(Partial lighting 3)
(Partial lighting 4)
When you turn the AMS knob clockwise
JOG RIGHT
JOG LEFT
When you turn the AMS knob counter-clockwise
Button
Click on the first or last page to see other CDP-XB930 / CDP-XB930E service manuals if exist.