DOWNLOAD Sony CDP-SP55 / CMT-SP55MD / CMT-SP55TC Service Manual ↓ Size: 1.58 MB | Pages: 27 in PDF or view online for FREE

5

• Mode for repeating operations of the CD player and TC deck automatically.

When errors occur:
Aging stops and a message indicating that an error has occurred such as “CD MEC ERR” is displayed.
(For details of errors, refer to “Error History Display Mode”.)

When no errors occur:
Aging is repeatedly performed.

Procedure:
1. Load any CD and a tape.
2. Select the function “ CD ” using the FUNCTION knob (TA).
3. While pressing the  TUNING MODE  button (ST) and  H  button (CDP), press the  ?/1  button (TA).
4. “AGING” is displayed on the fluorescent display tube briefly.
5. Operations are performed in the following sequence during aging.
   Every pressing of  DISPLAY  button (ST) changes the display in the CD display and TAPE display.

6.

To end aging, execute the cold reset.

Mode for checking the history of errors which have occurred in the CD player.
Execute this mode after ending the aging mode.

Procedure:
1.

Select the function “ CD ” using the FUNCTION  knob (TA).

2.

While pressing the  TUNING MODE  button (ST) and  S  button (CDP), press the  ?/1  button (TA).

3.

“EMC@@EDC**” id displayed.
@@ : Number of mechanism errors (Last 3 errors)
**

: Number of errors (NO DISC ERROR) which occurred after chucking (Last 3 errors)

4.

To end, press the  ?/1  button (TA) and turn OFF the power.

Note: To erase the error history, perform cold reset.

(While pressing the  TUNING MODE  button (ST) and ML button (CDP), press the  ?/1  button (TA).)

6

1

PLAY MODE button

2

REPEAT button

3

H button

4

S button

5

s button

q;

9

1

2

3

4

5

7

6

8

6

lm button

7

ML button

8

A button

9

S indicator

q;

H indicator

Y

ou must set the time beforehand to use the timer

functions.

The clock is on a 24-hour system for the European

model, and a 12-hour system for other models.

The 24-hour system is used for illustration

purposes.

Set the time before turning on the system.

`/1

Press CLOCK/TIMER SET while the

system is of

f.

The hour indication flashes.

Press 

.

 or 

>

 to set the hour

, 

then

press ENTER/YES.

The minute indication flashes.

Press 

.

 or 

>

 to set the minute,

then press ENTER/YES.

The clock starts.

Start o

v

er from step 1.

Y

ou can change the preset time while the system

is on.

Press CLOCK/TIMER SET

.

Press 

.

 or 

>

 repeatedly until “SET

CLOCK” appears, then press ENTER/YES.

Repeat steps 2 and 3.

•

The b

uilt-in clock sho

ws the time in the display

while the system is of

f. If you press DISPLA

Y at

this time, the display back light lights up, making

the clock easier to see.

•

The upper dot of the colon flashes for the f

irst 30

seconds, and the lo

wer dot flashes for the last 30

seconds of each minute.

This section is extracted from
instruction manual.

7

1

4

1

2

2

3

Set

Case

Front Panel Assy

CD Mechanism Deck (CDM55C-K6BD38)

Holder Assy

Optical pick-up

Main Board (Page 8)

Cam, Gear

BD Board

 (Page 9)

 (Page 10)

 (Page 9)

 (Page 8)

 (Page 10)

1

4

5

2

3

8

2

3

5

4

1

1

2