Sony BDV-E500W Service Manual ▷ View online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
Audio&Video Business Group
BDV-E500W
BD/DVD HOME THEATRE SYSTEM
9-889-542-02
2009H05-1
©
2009.08
US Model
Canadian Model
PX Model
Ver. 1.1 2009.08
• BDV-E500W is composed of following models.
As service manuals are issued for each component model, please
As service manuals are issued for each component model, please
refer to them.
SPECIFICATIONS
COMPONENT MODEL NAME
BDV-E500W
BD/DVD receiver
HCD-E500W
Front speaker
SS-TSB91
Center speaker
SS-CTB91
Surround speaker
SS-TSB92
Subwoofer
SS-WSB91
Surround amplifi er
TA-SA100WR
Wireless transceiver (US, Canadian)
EZW-RT10A
Wireless transceiver (PX)
EZW-RT10
DIGITAL MEDIA PORT adapter
TDM-iP20
Unpacking
• Front speakers (2)
• Surround speakers (2)
• Center speaker (1)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (4, blue/gray/green/purple)
• Video cord (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
• Bases (2)
• Screws (with washer) (6)
• Surround amplifer (1)
• Speaker cord cover (1)
• Speaker cord holder (1)
• Wireless transceivers (2)
• Operating Instructions
• Speaker Instruction Guide
• Quick Setup Guide
• To stabilize S-AIR reception (US, Canadian)
• Setup Disc (DVD) (US, Canadian)
• DIGITAL MEDIA PORT adapter (TDM-iP20) (1)
• Operating Instructions for DIGITAL MEDIA PORT adapter
(TDM-iP20)
• Front speakers (2)
• Surround speakers (2)
• Center speaker (1)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (4, blue/gray/green/purple)
• Video cord (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
• Bases (2)
• Screws (with washer) (6)
• Surround amplifer (1)
• Speaker cord cover (1)
• Speaker cord holder (1)
• Wireless transceivers (2)
• Operating Instructions
• Speaker Instruction Guide
• Quick Setup Guide
• To stabilize S-AIR reception (US, Canadian)
• Setup Disc (DVD) (US, Canadian)
• DIGITAL MEDIA PORT adapter (TDM-iP20) (1)
• Operating Instructions for DIGITAL MEDIA PORT adapter
(TDM-iP20)
Note: As for EZW-RT10A, EZW-RT10 and TDM-iP20, the part number
has been described to this service manual.
General (TDM-iP20)
Power requirements:
DC IN: 5 V,
0.6 A (via
DIGITAL MEDIA
PORT)
0.6 A (via
DIGITAL MEDIA
PORT)
Dimensions:
Approx.
I 80 ×
22(h) mm
(
(
I 3
1
/
4
×
7
/
8
(h) inch)
Mass:
Approx. 132 g
(4.7 oz)
(includes cable)
(4.7 oz)
(includes cable)
Cable length:
Approx. 1 m
(3.3 ft)
(3.3 ft)
Design and specifications are subject
to change without notice.
to change without notice.
General (BDV-E500W)
Power requirements
120 V AC, 60 Hz (US,
Power consumption
On: 120 W
Standby: 0.3 W (at the
Power Saving mode)
Standby: 0.3 W (at the
Power Saving mode)
Output voltage/current
(DIGITAL MEDIA PORT)
(DIGITAL MEDIA PORT)
DC 5 V/700 mA
LAN (100)
100BASE-TX Terminal
EXT
External memory slot (For
connecting the external
memory)
DC output: 5 V 500 mA
Max
connecting the external
memory)
DC output: 5 V 500 mA
Max
Dimensions (approx.)
430 mm × 93 mm × 400
mm (17 in × 3
mm (17 in × 3
3
/
4
in ×
15
3
/
4
in) (w/h/d) incl.
projecting parts
430 mm × 93 mm × 430
mm (17 in × 3
430 mm × 93 mm × 430
mm (17 in × 3
3
/
4
in × 17
in) (w/h/d) (incl. Wireless
transceiver)
transceiver)
Mass (approx.)
5.4 kg (11 lb 15 oz)
Canadian)
110 V - 240 V AC, 50/60
Hz (PX)
110 V - 240 V AC, 50/60
Hz (PX)
Wireless transceiver (EZW-RT10/EZW-
RT10A)
RT10A)
Communication system
S-AIR Specification
version 1.0
version 1.0
Frequency band
2.4000 GHz - 2.4835 GHz
Modulation method
DSSS
Power requirements
DC 3.3 V, 350 mA
Dimensions (approx.)
50 mm × 13 mm × 60 mm
(2 in ×
(2 in ×
17
/
32
in × 2
3
/
8
in) (w/
h/d)
Mass (approx.)
24 g (1 oz)
– Refer to next page for accessories list –
BDV-E500W
2
ACCESSORIES
4-127-348-21 MANUAL, INSTRUCTION (ENGLISH, FRENCH,
SPANISH) (for TDM-iP20) (US, Canadian)
4-127-366-21 MANUAL, INSTRUCTION (ENGLISH)
(for TDM-iP20) (PX)
4-147-228-12 MANUAL, INSTRUCTION (ENGLISH)
(US, Canadian)
4-147-228-21 MANUAL, INSTRUCTION (FRENCH) (Canadian)
4-147-228-32 MANUAL, INSTRUCTION (SPANISH) (US)
4-147-228-41 MANUAL, INSTRUCTION (ENGLISH) (PX)
4-149-821-11 DISK,SETUP (Setup Disc (DVD)) (US, Canadian)
1
1-754-059-12 ANTENNA, LOOP (AM loop antenna (aerial))
2
1-793-184-41 CONNECTOR
(F
TYPE
ADAPTOR)
(FM wire antenna (aerial))
3
1-836-692-11 CORD (WITH CONNECTOR) (SPEAKER)
(Speaker cords: 4, blue/gray/green/purple)
4
1-833-579-11 CORD, CONNECTION (Video cord)
5
1-487-361-11 COMMANDER, STANDARD (RM-ADP034)
(Remote commander (remote))
6
1-542-774-21 MEASUREMENT MIC (MONO)
(Calibration mic: ECM-AC2)
7
2-639-385-01 FOOT (Foot pads: 4 pieces, 1 set)
8
4-140-080-01 STAND
BASE
9
4-140-084-01 STAND
WEIGHT
10
7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-3
11
4-251-067-11 PACKING (AL FRONT)
12
2-580-608-01 SCREW, +PSW M5X16
(Screw (with washer): 1 piece)
13
3-277-783-01 COVER (CORD) (Speaker cord cover)
(for TA-SA100WR)
14
3-277-784-01 BOTTOM COVER (CORD) (Speaker cord holder)
(for TA-SA100WR)
15
A-1663-610-A EZW-RT10A (Wireless transceiver: 1 piece)
(US, Canadian)
15
A-1730-971-A EZW-RT10 (Wireless transceiver: 1 piece) (PX)
16
A-1609-467-A OVERALL
ASSY
(TDM-iP20)
17
3-277-581-01 FOOT (1 piece) (for TDM-iP20)
Ref. No.
Part No.
Description
Remark
AM loop antenna (aerial)
u1
FM wire antenna (aerial)
u1
Video cord
u1
Remote commander (remote)
u1
Calibration mic
u1
Foot pads
u1
Speaker cords
(4, blue/gray/green/purple)
Bases
u 2
or
Screws (with washer)
u6
8
9
10
10
11
11
11
11
11
11
11
11
17
not supplied
17
1
2
3
4
5
6
12
Wireless transceivers
u2
DIGITAL MEDIA PORT adapter
(TDM-iP20)
u1
Speaker cord cover
u1
13
14
15
16
Speaker cord holder
u1
7
Ver. 1.1
BDV-E500W
3
MEMO
BDV-E500W
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.06
New
1.1
2009.08
Addition of PX model
Display