Sony AVD-K800P / HT-C800DP Service Manual ▷ View online
13
AVD-K800P
2-11. SE-130 Board
3
claw
6
SE-130 board
2
claw
0
td belt
qa
td unit assy
table assy
9
td motor assy
4
two screws
(+BTP 2.6
×
8)
7
two screws
(+BTP 2.6
×
8)
8
two screws
(+P 3
×
3)
5
flat type wire
(6 core) (CN101)
1
connector (CN102)
14
AVD-K800P
2-12. DC Motor (M001)
2-13. Pickup Unit Section
1
two screws
(+BV B3)
(+BV B3)
2
chuck assy
3
screw
(+PTPWH M2.6)
(+PTPWH M2.6)
4
gear (chuck)
6
two claws
8
pickup unit section
7
5
5
connector
(CN004)
4
two screws
(+P 2.6
(+P 2.6
×
4)
1
screw
(+PTPWH M2.6)
(+PTPWH M2.6)
3
belt (loading)
2
gear (loading A)
6
DC motor (M001)
15
AVD-K800P
2-14. RF Board
3
flexible flat cable (24 core)
(CN001)
4
flexible flat cable (9 core)
(CN003)
2
claw
5
RF board
1
two screws
(+BTP 2.6
(+BTP 2.6
×
10)
6
three step screws (M)
7
three insulators
8
pickup unit
9
holder (BU) assy
16
AVD-K800P
SECTION 3
TEST MODE
[Version Display Mode]
* The software version is displayed.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set on.
2.
To enter the test mode, press the three buttons
INPUT SELECTOR , . and DISC SELECT 1
simultaneously.
INPUT SELECTOR , . and DISC SELECT 1
simultaneously.
3.
The message “VER #.##” is displayed for a while.
[Jog Volume Mode]
* Master Volume Check.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set on.
2.
To enter the test mode, press the three buttons x , > and
DISC SELECT 5 simultaneously.
DISC SELECT 5 simultaneously.
3.
The message “JOG 0” is displayed.
4.
“JOG 0” value increases like +1, +2, +3 ... if rotating the
MASTER VOLUME knob clockwise, or it decreases like
-1, -2, -3, ... if rotating counter-clockwise.
MASTER VOLUME knob clockwise, or it decreases like
-1, -2, -3, ... if rotating counter-clockwise.
5.
To exit from this mode, press the ?/1 button to turn the set
off.
off.
[Key Check Mode]
* Keyboard check.
Procedure:
1.
Procedure:
1.
Press the ?/1 button to turn the set on.
2.
To enter the test mode, press three buttons x , > and
DISC SELECT 2 simultaneously.
DISC SELECT 2 simultaneously.
3.
In the key check mode, the fluorecent indicator displays
“KEYNUM 0”. Each time a button (without the ?/1 button)
is pressed, “KEYNUM 0” value increases. However, once a
button is pressed, it is no longer taken into account.
“KEYNUM 0”. Each time a button (without the ?/1 button)
is pressed, “KEYNUM 0” value increases. However, once a
button is pressed, it is no longer taken into account.
4.
To exit from this mode, press the ?/1 button to turn the set
off.
off.
[Display Test Mode]
* Fluorescent segments and LEDs are tested when this test is
activated.
Procedure:
1.
1.
Press the ?/1 button to turn the set on.
2.
To enter the test mode, press the three buttons S , > and
DISC SELECT 3 simultaneously.
DISC SELECT 3 simultaneously.
3.
All segments turn on and all LEDs turn on.
( MULTI CHANNEL DECODING LED (blue),
DISC SELECT 1 to 5 LEDs (green, amber))
( MULTI CHANNEL DECODING LED (blue),
DISC SELECT 1 to 5 LEDs (green, amber))
4.
Press the > button and confirm the display and all LEDs
turn on.
turn on.
5.
Press the > button and confirm the display and all LEDs
turn off.
turn off.
6.
Press the > button and confirm all segments and all LEDs
turn off.
turn off.
7.
Press the > button and the message “STRU *.**” is
displayed.
displayed.
8.
Press the > button and the message “DVDU *.**” is
displayed.
displayed.
9.
Press the > button and the message “F/EU *.**” is
displayed.
displayed.
10. Press the > button and the model name “HT-C800DP” is
displayed.
11. Press the > button and the destination “DEST-***” is
displayed.
12. Press the > button and the message “M_LED ON” is
displayed. The MULTI CHANNEL DECODING LED (blue)
is turned on.
is turned on.
13. Press the > button and the message “4-G 5-A” is displayed.
The DISC SELECT 4 (green) LED and the DISC SELECT 5
(amber) LED are turned on.
(amber) LED are turned on.
14. Press the > button and the message “3-G 4-A” is displayed.
The DISC SELECT 3 (green) LED and the DISC SELECT 4
(amber) LED are turned on.
(amber) LED are turned on.
15. Press the > button and the message “2-G 3-A” is displayed.
The DISC SELECT 2 (green) LED and the DISC SELECT 3
(amber) LED are turned on.
(amber) LED are turned on.
16. Press the > button and the message “1-G 2-A” is displayed.
The DISC SELECT 1 (green) LED and the DISC SELECT 2
(amber) LED are turned on.
(amber) LED are turned on.
17. Press the > button and the message “ALL GREEN” is
displayed. The DISC SELECT 1 to 5 (green) LEDs are turned
on.
on.
18. Press the > button and the message “ALL AMBER” is
displayed. The DISC SELECT 1 to 5 (amber) LEDs are turned
on.
on.
19. Press the > button. All segments turn on and all LEDs turn
on just the same as 3.
20. By pressing the . button, these tests are performed in
reverse order.
21. To exit from this mode, press the ?/1 button to turn the set
off.
[Disc Tray Lock]
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure:
1.
disc in the store is equipped.
Setting Procedure:
1.
Press the ?/1 button to turn the set on.
2.
Press two buttons of x and A simultaneously for five seconds.
3.
The message “LOCKED” is displayed and the tray is locked.
Releasing Procedure:
1.
1.
Press two buttons of x and A simultaneously for five seconds
again.
again.
2.
The message “UNLOCKED” is displayed and the tray is
unlocked.
unlocked.
Note : When “LOCKED” is displayed, the tray lock is not released
by turning power on/off with the ?/1 button.
[All Clear Mode]
* The All Clear clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning the
set to the customer.
set to the customer.
Procedure:
1.
1.
Press the ?/1 button to turn the set on.
2.
To enter the test mode, press the three buttons S , . and
DISC SELECT 1 simultaneously.
DISC SELECT 1 simultaneously.
3.
The fluorescent indicator tube displays the message “ALL
CLEAR” and the set is reset.
CLEAR” and the set is reset.
PCM
DIGITAL EX
DTS
FM AM
ANGLE
PL II
ST
MPEG-2
PROGRESSIVE
REPEAT1
BASS
u
BOOST
AAC
SHUFFLE
MP3
MULTI PBC
ALL1DISCS
PROGRAM
D D
D D
dB
kHz
mft.
MHz
CD
VIDEO CD
SACD
DVD
S
M
H
MONO
AUTO
NTSC
TRACK
TITLE
CHAPTER
PL II
D D
PCM
DIGITAL EX
DTS
FM AM
ANGLE
ST
S
M
H
MPEG-2
PROGRESSIVE
MONO
AUTO
NTSC
TRACK
TITLE
CHAPTER
REPEAT1
BASS
u
BOOST
AAC
SHUFFLE
MP3
MULTI PBC
ALL1DISCS
PROGRAM
D D
dB
kHz
mft.
MHz
CD
VIDEO CD
SACD
DVD
Click on the first or last page to see other AVD-K800P / HT-C800DP service manuals if exist.