DOWNLOAD Sony AIR-SW10TI / SA-WA10R Service Manual ↓ Size: 1.09 MB | Pages: 28 in PDF or view online for FREE

Model
AIR-SW10TI SA-WA10R
Pages
28
Size
1.09 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
air-sw10ti-sa-wa10r.pdf
Date

Sony AIR-SW10TI / SA-WA10R Service Manual ▷ View online

SA-WA10R
4
SECTION  2
DISASSEMBLY
•  This set can be disassembled in the order shown below.
2-1.  DISASSEMBLY  FLOW
Note: Follow the disassembly procedure in the numerical order given.
2-2.  PANEL (SW)  BOARD/PANEL (FRONT)  ASSY
SET
2-2.  PANEL (SW) BOARD/
 PANEL 
(FRONT) 
ASSY
 (Page 
4)
2-3. CHASSIS 
(NET) 
ASSY
 (Page 
5)
2-4.  REAR PANEL BLOCK
 (Page 
5)
2-5.  POWER (SW) BOARD
 (Page 
6)
2-6.  MAIN (SW) BOARD
 (Page 
6)
2 Insert a flat-head screwdriver 
 
in the bottom of the set to raise 
 
the panel (front) assy a little.
1 two rubber foots (SW)
5 three screws
 (BVTP3 
u
 8)
8 PANEL (SW) board
7 sheet (1)
6 connector (CN603)
1 two rubber foots (SW)
7 panel (front) assy
4 Raise the panel (front) assy a little by 
 
little from bottom to top of the set.
six bosses
bottom side
3 Insert the jig (Part No. J-2501-238-A) into a space and 
 
raise the panel (front) assy gradually.
Note:  When using a jig, please work so as not to 
 
 injure panel (front) assy and speaker box.
3 Insert the jig (Part No. J-2501-238-A) 
 
into a space and raise the 
 
panel (front) assy gradually.
Note: When using a jig, please 
 
work so as not to injure 
 
panel (front) assy and 
 speaker 
box.
bottom side
SA-WA10R
5
2-3.  CHASSIS (NET)  ASSY
2-4.  REAR  PANEL  BLOCK
2 Raise the chassis (net) 
 
assy a little by little.
five bosses
1 Insert the jig (Part No. J-2501-238-A) into a space and 
 
raise the chassis (net) assy gradually.
Note: When using a jig, please work so as not to  
 
injure chassis (net) assy and speaker box.
7 chassis block
4 connector (CN703)
3 connector (CN602)
2
6 power cord connector (CN01)
8 rear panel block
1 four screws (3.5 
u
 14)
5 four screws (BVTP3 
u
 8)
SA-WA10R
6
2-5.  POWER (SW)  BOARD
2-6.  MAIN (SW)  BOARD
3 screw (BVTP3 
u
 8)
3 five screws (BVTP3 
u
 8)
4 barrier (fuse SW)
5 fuse (H.B.C.) 
 (T5AH/250V) 
(F01)
1 connector (CN706)
2 connector (CN704)
6 POWER (SW) board
9 two screws (BVTP3 
u
 8)
7 screw (BVTP3 
u
 8)
3 two screws (BVTP3 
u
 8)
1 three screws (BVTP3 
u
 8)
4 two screws (BVTP3 
u
 6)
5 shield case (main PWB SW)
4 screw (BVTP3 
u
 6)
4 screw (BVTP3 
u
 6)
7 two screws 
 (BVTP3 
u
 8)
7 three screws (BVTP3 
u
 8)
0 heat sink (AMP PWB SW) block
2 barrier (cord SW)
8 holder (S-AIR) block
6 two screws (BVTP2.6)
qs MAIN (SW) board
qa cushion (10 
u
 20)
SA-WA10R
7
SECTION  3
TEST  MODE
Note: Please get remote commander from the service parts when remote 
commander is necessary for the repair.
 
  • Use the bundled remote commander when remote commander is 
bundled to the repairing set.
 
  Part No. A-1717-785-A RM-ANU066 (US and Canadian models)
 
  Part No. A-1736-398-A RM-ANU070 (UK model)
1.  COLD  RESET
Procedure:
1.  Press the [
?/1
] button to turn on the system.
2.  Press the [PAIRING] and [
?/1
] buttons, and hold for more 
than three seconds.
3.  Cold reset is executed and turn off the system.
2.  VERSION  CHECK
Procedure:
1.  Press the [
?/1
] button to turn on the system.
2.  S-AIR ID slide switch select the “A”.
3.  Press the [PAIRING] button, and hold for more than three sec-
onds.
4.  The color of STANDBY indicator LED is confi rmed.
 
RED: Normal version
 ORG: 
TEST 
version
 
GRN: ROMOUT version
5.  The frequency to which S-AIR indicator LED blinks is con-
fi rmed. The blinking frequency shows the place of ten of the 
version.
6.  The frequency to which PAIRING indicator LED blinks is 
confi rmed. The blinking frequency shows the place of one of 
the version.
7.  Example: Normal version, Ver. 0.12
 
STANDBY indicator LED is red, S-AIR indicator LED blink-
ing once, PAIRING indicator LED blinking twice.
8.  To release from this mode, press the [PAIRING] button, and 
hold for more than three seconds.
Ver. 1.2
Page of 28
Display

Sony AIR-SW10TI / SA-WA10R Service Manual ▷ Download

  • DOWNLOAD Sony AIR-SW10TI / SA-WA10R Service Manual ↓ Size: 1.09 MB | Pages: 28 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony AIR-SW10TI / SA-WA10R in PDF for free, which will help you to disassemble, recover, fix and repair Sony AIR-SW10TI / SA-WA10R Audio. Information contained in Sony AIR-SW10TI / SA-WA10R Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.