DOWNLOAD Sony AIR-SA5R Service Manual ↓ Size: 1.32 MB | Pages: 28 in PDF or view online for FREE

Model
AIR-SA5R
Pages
28
Size
1.32 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
air-sa5r.pdf
Date

Sony AIR-SA5R Service Manual ▷ View online

AIR-SA5R
5
2-3.  POWER  UNIT
2-4.  POWER  AMP  BOARD
Note: This illustration sees the front cabinet block from rear side.
1 two screws
2 two screws (B2.6)
3 cabinet (rear) B
4 two screws (B2.6)
7 power unit
6 magic tape (B type)
5 cabinet (rear) A block
POWER AMP board
red
white
Lead wire from speaker (SP301).
3 flexible flat cable 
 
(6 pin) (CN901)
2 flexible flat cable
 
(6 pin) (CN902)
5 POWER AMP board
4 three screws
1 Remove two solders 
 
of speaker (SP301).
‡ ,nstallation of lead wire from speaker.
front cabinet block
AIR-SA5R
6
2-5.  CHASSIS  BLOCK
Note 1: This illustration sees the front cabinet block from rear side.
2-6.  KEY  BOARD,  MICON  BOARD
4 flexible flat cable 
 
(6 pin) (CN402)
3
5 chassis block
2 four screws (B2.6)
1 flexible flat cable 
 
(6 pin) (CN503)
KEY board
switch (S705)
knob
front cabinet block
Note 2: When installing knob, the position of
 
 
  switch (S705) and claw of knob is set 
   and 
installed.
8 MICON board
1 four screws
2
4 KEY board
3 flexible flat cable (12 pin)
 
(KEY board: CN701, MICON  board: CN401)
7 three screws
6 Remove four solders 
 
from LED board.
5 flexible flat cable
 
(8 pin) (CN403)
MICON board
blue
white
red
yellow
from LED board
‡ Installation of lead wire from LED board.
AIR-SA5R
7
2-7.  SPEAKER (3.9 cm) (SP301)
Note: This illustration sees the front cabinet block from rear side.
5 four screws (B2.6)
1 four screws (B2.6)
2
4 speaker box block
3 Remove two solders 
 
from POWER AMP board.
6 speaker (3.9 cm)
 (SP301)
white
red
from 
POWER 
AMP 
board
speaker (3.9 cm) (SP301)
‡ ,QstallatioQ of lead wire from 
  POWER AMP board.
froQt cabiQet block
AIR-SA5R
8
SECTION  3
TEST  MODE
FACTORY  SETTING
Procedure:
1.  Press the [
?/1
] button to turn the power on.
2.  Press two buttons of the [PAIRING] and [
?/1
] simultaneously 
after pressing the [PAIRING] button.
3.  All LEDs lights for one second, and the data of the built-in data 
fl ash memory is initialized.
Page of 28
Display

Click on the first or last page to see other AIR-SA5R service manuals if exist.