Sony AIR-SA10 / DAV-HDX277WC / DAVHDX576WF / DAV-HDX678WF / DAV-HDX975WF Service Manual ▷ View online
AIR-SA10
6
grille frame assy
four screws
(B2.6)
connector (CN310)
connector (CN902)
connector (CN312)
flexible flat cable (9 core)
(CN316)
flexible flat cable (11 core)
(CN315)
connector (CN307)
four screws
(B2.6)
RB top panel block
Note: Follow the disassembly procedure in the numerical order given.
3-2. TOP PANEL BLOCK
AIR-SA10
7
twelve screws
(B2.6)
screw
(BVTP2.6)
connector
(CN308)
connector
(CN309)
HP board
front panel block
HP holder board
speaker (6.5 cm) (SP201) (R-ch)
speaker (6.5 cm) (SP101) (L-ch)
front panel block
four screws
(BVTP3
× 10)
four screws
(BVTP3
× 10)
two cap cushions
3-3. HP BOARD, FRONT PANEL BLOCK
3-4. SPEAKER (6.5 cm) (SP101: L-CH/SP201: R-CH)
Note: This illustration is seeing front panel block from the inside.
AIR-SA10
8
3-5. S-AIR RX-IF BOARD, KEY BOARD, MAIN BOARD
Note: This illustration is seeing top panel block from the inside.
two screws
(BVTP2.6)
RH two screws
(BVTP2.6)
screw
(BVTP2.6)
nine screws
(BVTP2.6)
RB KEY board
screw
(BVTP2.6)
flexible flat cable (13 core)
(CN003)
clamp (L35)
shield sheet (SAIR)
two solders
RT flexible flat cable (13 core)
(CN301)
RE four screws (BVTP2.6)
RG MAIN board
flexible flat cable (5 core)
(CN802)
RI holder (SAIR)
S-AIR RX-IF board
AIR-SA10
9
3-6. REG BOARD, POWER TRANSFORMER (PT901), POWER CORD
3-7. AMP BOARD, LCD BOARD
Note: This illustration is seeing front panel block from the inside.
four screws
(BVTP3
× 10)
REG board
Cut two cables tie.
Remove a solder.
(cable:
white)
Remove a solder.
(cable:
black)
four screws
(BVTP3
× 10)
power
transformer
(PT901)
(PT901)
POWER board
RB screw
(BVTP3
× 10)
RT coating clip
RE AC HOLDER board
RH power cord
RG ferrite core
Remove the solder.
Note: When installing the power code,
note the color of cable.
four screws
(BVTP2.6)
three screws
(BVTP2.6)
LCD board
AMP board
Click on the first or last page to see other AIR-SA10 / DAV-HDX277WC / DAVHDX576WF / DAV-HDX678WF / DAV-HDX975WF service manuals if exist.