Sharp VC-S2000 (serv.man21) User Manual / Operation Manual ▷ View online
52
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
VCR RESET
1.
Press the
STOP
button on the front of the VCR.
2.
Press and hold
MENU
and the
CHANNEL
(
/
] buttons together for 10 seconds.
✔
VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the
procedure below:
1.
Press the
STANDBY
button.
2.
Press and hold the
MENU
button on the VCR front panel for 3 seconds.
3.
Wait for a flashing channel number to appear on the VCR display.
4.
The channel number can now be changed by using the
CHANNEL
(
/
]
buttons.
5.
Press the
SET
button to store.
6.
Your TV will now require tuning to the new
channel.
(White text
blue background)
RF THROUGH ON/OFF:
If you wish to connect yhour VCR to the TV with only a scart lead, the RF Output on your VCR
can be turned OFF and ON by pressing the
CLEAR
button then the
SET
button on the
remote control at point 3 of the
RF CHANNEL TUNING
above. This will help minimise
interference.
V CR R F
S E T
: E N T E R
ME NU : E X I T
TINS-3894 ENGLISH.book Page 52 Wednesday, September 6, 2000 11:53 AM
53
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
GUARANTEE
SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the
repair, or at its option the replacement, of this product subject to the conditions listed
below:
repair, or at its option the replacement, of this product subject to the conditions listed
below:
1.
This guarantee shall only apply to faults which are due to inferior workmanship or
materials. It does not cover faults or damage by accident, misuse, fair wear and
tear, neglect, tampering with the product, or repair other than by a Service
Facility appointed by SHARP.
materials. It does not cover faults or damage by accident, misuse, fair wear and
tear, neglect, tampering with the product, or repair other than by a Service
Facility appointed by SHARP.
2.
As this product is intended for private domestic use only, the guarantee will not
apply if the product is used in the course of a business, trade or profession.
apply if the product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to SHARP,
or its appointed Service Facility within one year from the date this product was
purchased. Proof of purchase must be provided.
or its appointed Service Facility within one year from the date this product was
purchased. Proof of purchase must be provided.
4.
The guarantee does not cover carriage costs, batteries or video tapes.
5.
In the unlikely event of this product requiring repair, please contact the supplier
from whom it was purchased. Where this is not possible, please contact the
SHARP Customer Information Centre on the telephone number given below.
from whom it was purchased. Where this is not possible, please contact the
SHARP Customer Information Centre on the telephone number given below.
6.
This guarantee is offered as an additional benefit to your statutory rights and
does not affect these rights in any way.
does not affect these rights in any way.
7.
No person has any authority to vary the terms or conditions of this guarantee.
If you have any difficulty operating this product, or would like information on other
SHARP products, please telephone the SHARP Customer Information Centre on the
number given below.
SHARP products, please telephone the SHARP Customer Information Centre on the
number given below.
SHARP Customer Helpline Tel: 08705 274277
TINS-3894 ENGLISH.book Page 53 Wednesday, September 6, 2000 11:53 AM
54
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours)
or www.sharp.co.uk/support
CONNECTING TO THE MAINS
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does not
have a mains power switch. When connected
to the mains, the unit will draw current at all
times to power the clock. Be sure to unplug the
VCR when it is not to be used for several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked
(ASTA) or
(BSI) to BS-1362. Remove the fuse
cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
Never connect the plug to the
mains without the fuse cover
fitted.
fitted.
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
fuse and dispose of the cut-off plug safely.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
•
blue wire to the terminal marked N or coloured black or blue.
•
brown wire to the terminal marked L or coloured red or brown.
Severe electric shock may occur if you connect the cut-off
plug to a mains socket. If a new plug is fitted, observe the
wiring code supplied by the plug manufacturer (and given
below.) If you have any doubt, consult a qualified
electrician.
plug to a mains socket. If a new plug is fitted, observe the
wiring code supplied by the plug manufacturer (and given
below.) If you have any doubt, consult a qualified
electrician.
•
Ensure neither the brown nor the blue wire is connected
to the earth terminal in your plug.
to the earth terminal in your plug.
•
Do not allow water to come into contact with the power
supply cord or plug.
supply cord or plug.
•
A damaged power supply cord or loose plug may cause
electric shock.
electric shock.
•
Contact your SHARP dealer or a qualified electrician. Do
not use the VCR.
not use the VCR.
ASA
TINS-3894 ENGLISH.book Page 54 Wednesday, September 6, 2000 11:53 AM
Printed in U.K.
TINS-3894UMZZ
SHARP ELECTRONICS (U.K.) Ltd.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC
as amended by 93/68/EEC.
improvement.
every possible care has been taken to make it complete and as accurate as possible.
CALLING FOR SERVICE
●
If you are unable to resolve a problem using the TROUBLESHOOTING guide, do not
remove the cabinet or attempt to service this VCR yourself.
remove the cabinet or attempt to service this VCR yourself.
●
For service please contact your dealer. If this is not possible, please call our Customer
Information Centre for details of your nearest Sharp Service Centre.
Information Centre for details of your nearest Sharp Service Centre.
●
Please note that for repairs during the guarantee period, you will need to produce
proof of purchase.
proof of purchase.
●
Certain replacement parts and accessories may be obtained from our main parts
distributor who can be contacted at: Willow Vale Electronics Limited.
Tel.0121 766 5414. Most credit/debit cards accepted.
distributor who can be contacted at: Willow Vale Electronics Limited.
Tel.0121 766 5414. Most credit/debit cards accepted.
SHARP Customer Helpline: Tel: 08705 274277 (office hours)
SHARP Customer Helpline from Ireland: (01) 6760648 (office hours)
SHARP Customer Helpline from Ireland: (01) 6760648 (office hours)
Alternatively, please try our website:
www.sharp.co.uk/support
VC-S2000HM COVER 6/9/00 11:31 am Page 4
Click on the first or last page to see other VC-S2000 (serv.man21) service manuals if exist.