Sharp VC-MH85 Service Manual / Specification ▷ View online
3
VC-MH705HM/LM
VC-MH815HM/LM,MH85HM
VC-MH715HM,MH835HM
VC-MH815HM/LM,MH85HM
VC-MH715HM,MH835HM
1. SPECIFICATIONS
Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan system
Video signal: PAL colour and I signals, 625 lines
Recording/playing time: 240 min max. with SHARP E-240 tape (SP mode)
480 min max. with SHARP E-240 tape (LP mode)
720 min max. with SHARP E-240 tape (EP mode)
720 min max. with SHARP E-240 tape (EP mode)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (SP mode)
11.70 mm/s (LP mode)
7.80 mm/s (EP mode)
7.80 mm/s (EP mode)
Antenna: 75 ohm unbalanced
Receiving channel: UHF Channel E21-E69
RF converter output signal: UHF Channel E21-E69 (Preset to CH E36)
Power requirement: AC230V ~ 240V, 50Hz
Power consumption: Approx. 14.1W (AC240V/50Hz) and 3W max. at standby mode
Operating temperature: 5°C to 40°C
Storage temperature: –20°C to 55°C
Weight: Approx. 2.5 kg (VC-MH705HM/LM,MH715HM)
Approx. 2.9 kg (VC-MH815HM/LM,MH835HM,MH85HM)
Dimensions: 360 mm (W) x 231.4 mm (D) x 92.5 mm (H) (VC-MH705HM/LM)
360 mm (W) x 229.0 mm (D) x 92.0 mm (H) (VC-MH715HM)
430 mm (W) x 227 mm (D) x 92 mm (H) (VC-MH815HM/LM,MH835HM,MH85HM)
430 mm (W) x 227 mm (D) x 92 mm (H) (VC-MH815HM/LM,MH835HM,MH85HM)
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
S/N ratio: 45 dB (SP mode)
Horizontal resolution: 250 lines (SP mode)
AUDIO 0 dBs = 0.775 Vrms
Input: Line1: -3.8 dBs, 10k ohm
Line 2:-3.8 dBs, 10k ohm
Line 3:-3.8 dBs, 47k ohm
Line 3:-3.8 dBs, 47k ohm
Output: Line1: -3.8 dBs, 1k ohm
Line 2:-3.8dBs, 1k ohm
S/N ratio: 46 dB
Frequency responce: 80 Hz ~ 10 kHz (SP mode)
80HZ ~ 5 kHz (LP mode)
Hi-Fi Dynamic Range: 90 dB TYP
Hi-Fi Wow and Flutter: 0.005%
Hi-Fi Frequency Responce: 20 Hz ~ 20 kHz
Hi-Fi Distortion: 0.5% max.
Hi-Fi Crosstalk (at 1kHz): 55 dB min.
Accessories included: 75 ohm coaxial cable
Operation manual
Infrared remote control
Battery
Quick Start Guide (QSG) (For VC-M705HM and VC-MH85HM)
Infrared remote control
Battery
Quick Start Guide (QSG) (For VC-M705HM and VC-MH85HM)
Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
As part of our policy of continuous improvement, we reserve the
right to alter design and specifications without notice.
right to alter design and specifications without notice.
Display