Sharp VC-M333 (serv.man6) User Manual / Operation Manual ▷ View online
37
If problems persist contact the SHARP Helpline on tel: 0990-274277
VCR RESET
1.
Press
STOP
to switch on the VCR.
2.
Press and hold
MENU
and
CHANNEL
buttons together on the front of the VCR
for 10 seconds.
3.
The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with auto installation.
✔
All the programmes should now be correctly tuned in and the clock set.
GUARANTEE
SHARP Electronics (UK) Ltd. (hereafter called Sharp) guarantee to provide for the repair, or at
its option the replacement, of this product subject to the conditions listed below:
its option the replacement, of this product subject to the conditions listed below:
1.
This guarantee shall only apply to faults which are due to inferior workmanship or
materials. It does not cover faults or damage by accident, misuse, fair wear and tear,
neglect, tampering with the product, or repair other than by a Service Facility appointed
by SHARP.
materials. It does not cover faults or damage by accident, misuse, fair wear and tear,
neglect, tampering with the product, or repair other than by a Service Facility appointed
by SHARP.
2.
As this product is intended for private domestic use only, the guarantee will not apply if
the product is used in the course of a business, trade or profession.
the product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to SHARP, or its
appointed Service Facility within one year from the date this product was purchased.
Proof of purchase must be provided.
appointed Service Facility within one year from the date this product was purchased.
Proof of purchase must be provided.
4.
The guarantee does not cover carriage costs, batteries or video tapes.
5.
In the unlikely event of this product requiring repair, please contact the supplier from
whom it was purchased. Where this is not possible, please contact the SHARP Helpline on
the telephone number given below.
whom it was purchased. Where this is not possible, please contact the SHARP Helpline on
the telephone number given below.
6.
This guarantee is offered as an additional benefit to your statutory rights and does not
affect these rights in any way.
affect these rights in any way.
7.
No person has any authority to vary the terms or conditions of this guarantee.
If you have any difficulty operating this product, or would like information on other SHARP
products, please telephone the SHARP Helpline on the number given below.
products, please telephone the SHARP Helpline on the number given below.
In the unlikely event of this equipment requiring repair during the guarantee period, you will
need to provide proof of the date of purchase to the repairing company. Please keep your
invoice or receipt which is supplied at the time of purchase.
need to provide proof of the date of purchase to the repairing company. Please keep your
invoice or receipt which is supplied at the time of purchase.
Refer to the
CUSTOMISED INSTALLATION
chapter if
•
Your VCR could not tune automatically - due to for example poor reception.
•
You wish to re-arrange the channel order.
•
You wish to change the time on the clock or if the VCR could not set the time.
SHARP Helpline: Tel: 0990 274277
Please note that all calls are charged at local rate.
Please note that all calls are charged at local rate.
TINS-3809UMZZ ENGLISH.book Page 37 Monday, April 3, 2000 2:03 PM
38
If problems persist contact the SHARP Helpline on tel: 0990-274277
CONNECTING TO THE MAINS
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse. The VCR does not
have a mains power switch. When connected
to the mains, the unit will draw current at all
times to power the clock. Be sure to unplug the
VCR when it is not to be used for several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked
(ASTA) or
(BSI) to BS-1362. Remove the fuse
cover as shown. Replace the fuse and re-fit the fuse cover securely into the plug.
Never connect the plug to the
mains without the fuse cover
fitted.
fitted.
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
fuse and dispose of the cut-off plug safely.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide:
•
blue wire to the terminal marked N or coloured black or blue.
•
brown wire to the terminal marked L or coloured red or brown.
Severe electric shock may occur if you connect the cut-off
plug to a mains socket. If a new plug is fitted, observe the
wiring code supplied by the plug manufacturer (and given
below.) If you have any doubt, consult a qualified
electrician.
plug to a mains socket. If a new plug is fitted, observe the
wiring code supplied by the plug manufacturer (and given
below.) If you have any doubt, consult a qualified
electrician.
•
Ensure neither the brown nor the blue wire is connected
to the earth terminal in your plug.
to the earth terminal in your plug.
•
Do not allow water to come into contact with the power
supply cord or plug.
supply cord or plug.
•
A damaged power supply cord or loose plug may cause
electric shock.
electric shock.
•
Contact your SHARP dealer or a qualified electrician. Do
not use the VCR.
not use the VCR.
ASA
TINS-3809UMZZ ENGLISH.book Page 38 Monday, April 3, 2000 2:03 PM
SHARP ELECTRONICS (U.K.) Ltd.
TINS-3809UMZZ
Printed in U.K.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC
as amended by 93/68/EEC.
improvement.
every possible care has been taken to make it complete and as accurate as possible.
●
If you are unable to resolve a problem using the TROUBLESHOOTING guide, do not
remove the cabinet or attempt to service this VCR yourself.
remove the cabinet or attempt to service this VCR yourself.
●
For service please contact your dealer. If this is not possible, please call our Customer
Information Centre for details of your nearest Sharp Service Centre.
Information Centre for details of your nearest Sharp Service Centre.
●
In the unlikely event of this equipment requiring repair during the guarantee period, you
will need to provide proof of the date of purchase to the repairing company. Please keep
your invoice or receipt which is supplied at the time of purchase.
will need to provide proof of the date of purchase to the repairing company. Please keep
your invoice or receipt which is supplied at the time of purchase.
●
Certain replacement parts and accessories may be obtained from our main parts
distributor who can be contacted at: Willow Vale Electronics Limited
Tel. Manchester 0161 205 7531/Birmingham 0870 600 0271. Most credit/debit cards
accepted.
distributor who can be contacted at: Willow Vale Electronics Limited
Tel. Manchester 0161 205 7531/Birmingham 0870 600 0271. Most credit/debit cards
accepted.
SHARP Customer Helpline: Tel: 0990 274277
CALLING FOR SERVICE
VC-M333HM cover 28/3/00 3:12 pm Page 4
SHARP ELECTRONICS (U.K.) Ltd.
TINS-3809UMZZ
Printed in U.K.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC
as amended by 93/68/EEC.
improvement.
every possible care has been taken to make it complete and as accurate as possible.
●
If you are unable to resolve a problem using the TROUBLESHOOTING guide, do not
remove the cabinet or attempt to service this VCR yourself.
remove the cabinet or attempt to service this VCR yourself.
●
For service please contact your dealer. If this is not possible, please call our Customer
Information Centre for details of your nearest Sharp Service Centre.
Information Centre for details of your nearest Sharp Service Centre.
●
In the unlikely event of this equipment requiring repair during the guarantee period, you
will need to provide proof of the date of purchase to the repairing company. Please keep
your invoice or receipt which is supplied at the time of purchase.
will need to provide proof of the date of purchase to the repairing company. Please keep
your invoice or receipt which is supplied at the time of purchase.
●
Certain replacement parts and accessories may be obtained from our main parts
distributor who can be contacted at: Willow Vale Electronics Limited
Tel. Manchester 0161 205 7531/Birmingham 0870 600 0271. Most credit/debit cards
accepted.
distributor who can be contacted at: Willow Vale Electronics Limited
Tel. Manchester 0161 205 7531/Birmingham 0870 600 0271. Most credit/debit cards
accepted.
SHARP Customer Helpline: Tel: 0990 274277
CALLING FOR SERVICE
VC-M333HM cover 28/3/00 3:12 pm Page 4
Display
