Sharp VC-M315HM (serv.man7) Service Manual ▷ View online
43
VC-M305HM/LM
VC-M315HM/LM
FLOW CHART NO.16 DRUM SERVO TROUBLESHOOTING
Drum servo does not function.
Check peripheral circuit of X701.
Is there 14.318MHz oscillation at
pins(37) and (38) of IC701?
pins(37) and (38) of IC701?
NO
In PB mode
YES
In REC mode
Is there drum FG signal at pin
(65) of IC701 present?
(65) of IC701 present?
Is the V-SYNC signal(reference)
at pin(50) of IC701?
at pin(50) of IC701?
YES
NO
NO
Check peripheral circuit of pin
(50) of IC701, C716, C715 and
R708.
(50) of IC701, C716, C715 and
R708.
Check drum FG signal line.
Is the head switching pulse at pin
(23) of IC701 present?
(23) of IC701 present?
NO
See FLOW CHART NO.15
(HEAD SWITCHING PULSE
TROUBLESHOOTING.)
(HEAD SWITCHING PULSE
TROUBLESHOOTING.)
YES
YES
Is the drum APC output at pin(34)
of IC701 and drum AFC output at
pin(32) of IC701 present?
of IC701 and drum AFC output at
pin(32) of IC701 present?
NO
Replace IC701.
YES
YES
Is the drum control voltage
applied to pin(12) of P701?
applied to pin(12) of P701?
YES
Is pin(30) of IC701 in high
impedance?
impedance?
NO
YES
NO
Check line between pins(34) and
(32) of IC701 and pin(12) of P701.
(32) of IC701 and pin(12) of P701.
Does the IC on mechanism operate
normally?
normally?
Replace IC701.
Replace drum motor.
44
VC-M305HM/LM
VC-M315HM/LM
1
2
FLOW CHART NO.17 CAPSTAN SERVO TROUBLESHOOTING
Capstan servo does not function.
Only PB mode inoperative
YES
Only REC mode inoperative
YES
YES
NO
YES
NO
NO
NO
NO
Check peripheral
circuit of pin(50)
of IC701, C716,
C715 and R708.
circuit of pin(50)
of IC701, C716,
C715 and R708.
Is there 14.318MHz
oscillation at pins
(37) and (38) of
IC701?
oscillation at pins
(37) and (38) of
IC701?
Check peripheral
circuit of X701.
circuit of X701.
YES
YES
Dose pin(29) of
IC701 operate
normally?
IC701 operate
normally?
Check "
1
"
Check "
2
"
Check capstan
motor unit and/or
replace.
motor unit and/or
replace.
Is there capstan
AFC and APC
at pins(31) and
(33) of IC701?
AFC and APC
at pins(31) and
(33) of IC701?
Replace IC701.
Replace A/C
head.
head.
YES
YES
YES
NO
NO
NO
Is there capstan
AFC signal at pin
(31) of IC701?
AFC signal at pin
(31) of IC701?
NO
NO
NO
Is there capstan
APC signal at pin
(33) of IC701?
APC signal at pin
(33) of IC701?
YES
NO
Replace IC701.
Does PB CTL
signal appear at
pin (76) of IC701?
signal appear at
pin (76) of IC701?
Replace IC701.
Is there REC CTL
signal output at
pins(75) and (74)
of IC701?
signal output at
pins(75) and (74)
of IC701?
Does PB CTL
signal appear at
pin(76) of IC701?
signal appear at
pin(76) of IC701?
Does A/C head
operate
normally?
operate
normally?
Adjust the height
of the A/C head.
of the A/C head.
Does the capstan
FG signal appear
at pin (67) of IC-
701?
FG signal appear
at pin (67) of IC-
701?
Check the capstan
FG signal line bet-
ween pin(1) of P701
and pin(67) of IC701.
FG signal line bet-
ween pin(1) of P701
and pin(67) of IC701.
Check peripheral
circuit of P701.
circuit of P701.
Is the V-SYNC
signal(reference) at
pin(50) of IC701?
signal(reference) at
pin(50) of IC701?
Are REC and/or PB
mode inoperative?
mode inoperative?
NO
45
VC-M305HM/LM
VC-M315HM/LM
FLOW CHART NO.18 E-E MODE TROUBLESHOOTING
No picture E-E signal.
NO
NO
NO
NO
NO
YES
YES
YES
YES
Is there picture signal inputted
in the pin (31) of IC201?
in the pin (31) of IC201?
Check line between rear video input terminal and pin (31) of IC201.
Is the supply voltage of 5V
(Y-Vcc) fed to pin(12) of
IC201?
(Y-Vcc) fed to pin(12) of
IC201?
Check PC 5V line.
YES
Is there a picture signal
outputted in the emitter of
Q201?
outputted in the emitter of
Q201?
NO
Check the line between pin
(52) of IC201 and Q201
(52) of IC201 and Q201
Is there Y/C serial data and
Y/C clock signal applied to
pins(63) and (62) of IC201?
Y/C clock signal applied to
pins(63) and (62) of IC201?
Check line between pins(63),
(62) of IC201 and pins(84),
(85) of IC701.
(62) of IC201 and pins(84),
(85) of IC701.
Replace IC201.
Is there a picture signal
inputted in the pin(49) of
IC701?
inputted in the pin(49) of
IC701?
YES
NO
NO
Check peripheral circuit of
Q251.
Q251.
YES
Is there a picture signal
outputted in the pin(47) of
IC701?
outputted in the pin(47) of
IC701?
Is there a picture signal
outputted in the pin(52) of
IC201?
outputted in the pin(52) of
IC201?
Is there a picture signal
outputted in the emitter of
Q251?
outputted in the emitter of
Q251?
Check the line between pin
(52) of IC201 and pin (49)
of IC701
(52) of IC201 and pin (49)
of IC701
Is the supply voltage of 5V
(OSD Vcc) fed to pin (51)
of IC701?
(OSD Vcc) fed to pin (51)
of IC701?
NO
Check PC 5V line.
YES
Is there a picture signal
outputted at pin(25) ofIC2501?
outputted at pin(25) ofIC2501?
NO
Check peripheral circuit of
IC2501.
IC2501.
YES
Check the line between IC2501
peripheral and output terminal
periphery.
peripheral and output terminal
periphery.
46
VC-M305HM/LM
VC-M315HM/LM
YES
YES
YES
YES
YES
YES
NO
NO
NO
YES
NO
NO
YES
NO
NO
NO
NO
FLOW CHART NO.19 RECORDING MODE TROUBLESHOOTING
Is there luminance signal (approx.0.5Vp-p)
inputting at pin (19) of IC201?
inputting at pin (19) of IC201?
Is voltage 5V applied to the CCD section
power terminal at pin(36) of IC201?
power terminal at pin(36) of IC201?
Check whether the pin(73) and (75) of IC201
oscillate 4.43MHz.
oscillate 4.43MHz.
Is there audio signal outputted at
pin(11) of IC201?
pin(11) of IC201?
Check line between pin(60) and pin (46) of
IC201. (C512)
IC201. (C512)
Check line between pin(58) and (35)
of IC201 .
of IC201 .
Is there chroma signal inputted at
pin(58) of IC201?
pin(58) of IC201?
SP mode : Is there record FM signal (approx. 20mVp-p) output at pins (88), (89)(SP1)) and
pins (86), (87) ((SP2)) of IC201?:
LP mode : Is there record FM signal (approx. 20mVp-p) output at pins (93), (94)(LP1)) and
pins (92), (91) ((LP2)) of IC201?:
pins (86), (87) ((SP2)) of IC201?:
LP mode : Is there record FM signal (approx. 20mVp-p) output at pins (93), (94)(LP1)) and
pins (92), (91) ((LP2)) of IC201?:
Is CCD control voltage approx 0V applied
normally to the pin (37) from pin (57) of
IC201? Is the clock signal (approx.
8.86MHz/0.5Vp-p) for the CCD applied
normally to the pin(44)from (69) of IC201?
normally to the pin (37) from pin (57) of
IC201? Is the clock signal (approx.
8.86MHz/0.5Vp-p) for the CCD applied
normally to the pin(44)from (69) of IC201?
Check line between pins(24), (23) of IC201
(C210).
(C210).
Check peripherial circuit of pins(13) and (14)
of IC201. (R201, R202, C203)
of IC201. (R201, R202, C203)
Is there luminance signal (approx. 0.5Vp-p),
input and output at pins (13) and (14)
of IC201, respectively?
input and output at pins (13) and (14)
of IC201, respectively?
NO
NO
Check parts around of X502.
Athough picture record is possible, colour does not appear. (E-E mode is possible.)
Is there luminance signal (approx.0.3Vp-p)
inputting at pin (42) of IC201?
inputting at pin (42) of IC201?
YES
Is there luminance signal (approx.0.5Vp-p)
inputting at pin (26) of IC201?
inputting at pin (26) of IC201?
Check line between pins (18) and (19)
of IC201.
of IC201.
Check line between pins (21) and (42)
of IC201. (C208)
of IC201. (C208)
Check line between pins (39) and (26)
of IC201. (C212)
of IC201. (C212)
Is there luminance signal (approx.0.5Vp-p)
outputting at pin (39) of IC201?
outputting at pin (39) of IC201?
YES
Is there luminance signal (approx.0.5Vp-p)
inputting at pin (23) of IC201?
inputting at pin (23) of IC201?
Is voltage of 5V applied to the chroma
section power terminal at pin(61) of IC201?
section power terminal at pin(61) of IC201?
Check peripheral circuit pin(61) of IC201 and
PC 5V line.
PC 5V line.
Is there chroma signal inputted at pin(35) of
IC201?
IC201?
SP mode : Is there chroma ingredient included signal (approx. 20mVp-p) output at pins (88), (89)
(SP1)) and pins (86), (87) ((SP2)) of IC201?:
LP mode : Is there chroma ingredient included signal (approx. 20mVp-p) output at pins (93), (94)
(EP1)) and pins (92), (91)((EP2)) of IC201?:
(SP1)) and pins (86), (87) ((SP2)) of IC201?:
LP mode : Is there chroma ingredient included signal (approx. 20mVp-p) output at pins (93), (94)
(EP1)) and pins (92), (91)((EP2)) of IC201?:
Check or replace the cylinder.
YES
YES
Is the supply voltage of 5V(PRE/REC
Vcc) fed to pin (90) of IC201?
Vcc) fed to pin (90) of IC201?
NO
Replace the IC201.
Picture (Luminance) record is impossible. (E-E mode is possible.)
Click on the first or last page to see other VC-M315HM (serv.man7) service manuals if exist.