Sharp VC-M311HM (serv.man5) User Manual / Operation Manual ▷ View online
VIDEO CASSETTE RECORDER
REMOTE
CONTROL
For a more
detailed
picture of
your remote
control refer
control refer
to page (ii).
3
BEFORE USING YOUR VCR
UNPACKING THE ACCESSORIES
(TYPE AA/R6/UM3)
BATTERIES (X2)
for the remote control
unit.
BATTERIES (X2)
for the remote control
unit.
RF CONNECTION CABLE
connects the VCR to the TV.
connects the VCR to the TV.
Remote Control
●
Remote Control must be pointed towards the VCR to operate.
●
Do not expose to liquid or shock.
●
May not function if the VCR is in direct sunlight or any other strong light.
●
Replace both alkaline batteries (type AA/R6/UM3) if the remote control
fails.
fails.
●
Remove the batteries and keep in a safe place if you do not plan to use the
VCR for several months.
VCR for several months.
●
Remove and dispose of flat batteries safely and promptly.
●
Incorrect use of batteries may cause them to leak or burst.
Battery cover
To fit the batteries into the remote
control
Remove the battery cover on the back of
the remote control.
Fit the batteries:
control
Remove the battery cover on the back of
the remote control.
Fit the batteries:
to
and
to
terminals. Place the battery cover back
into position.
into position.
+
+
CHECK ALL THESE ACCESSORIES ARE SUPPLIED WITH YOUR VCR. CONTACT
YOUR DEALER IF ANY ARE MISSING.
YOUR DEALER IF ANY ARE MISSING.
VC-M301HM/LM 3/2/99 11:56 am Page 7
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
The VCR is correctly connected.
Connect your existing aerial cable to
the ANTENNA IN socket on your
VCR.
the ANTENNA IN socket on your
VCR.
4
INSTALLING YOUR VCR
CONNECTING THE CABLES
Connect your TV to the VCR using
the supplied RF connection cable,
i.e. connect the VCR RF OUT
socket to the TV AERIAL IN socket.
the supplied RF connection cable,
i.e. connect the VCR RF OUT
socket to the TV AERIAL IN socket.
BACK OF
TELEVISION
Connect the VCR to the
mains
mains
2
3
1
AERIAL OR
CATV CABLE
CATV CABLE
Optional SCART (not supplied). If you have a scart lead connect it to your
TV and LINE 1 IN/OUT socket on the VCR.
TV and LINE 1 IN/OUT socket on the VCR.
VC-M301HM/LM 3/2/99 11:56 am Page 8
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
The TV is tuned to the VCR.
1. Ensure your VCR is still in the STANDBY
mode (not low power).
2. Switch on the TV. Select an unused
channel on your TV for your VCR (there
may be a dedicated video channel refer
to your TV operation manual).
may be a dedicated video channel refer
to your TV operation manual).
3. Press and hold the MENU button for 3
seconds. The VCR will search and
display the ideal RF channel.
display the ideal RF channel.
4. Tune the selected channel on your TV
(refer to your TV manual) until the menu
screen appears.
screen appears.
5. Press SET to store the RF channel and to
place the VCR back into STANDBY.
If problems persist contact SHARP Consumer Information Centre 0990-274277
IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle
between STANDBY and LOW POWER modes. The VCR display will not be
illuminated in low power mode.
between STANDBY and LOW POWER modes. The VCR display will not be
illuminated in low power mode.
e.g.
T I M E R
M O D E
S E T U P
S E T U P
▲ ▼
: S E L E C T
S E T : E N T E R M E N U : E X I T
MENU SCREEN
VCR
NOTE:
If you have a preferred channel, the RF channel can be set manually (21-69) after Step 3
using [
If you have a preferred channel, the RF channel can be set manually (21-69) after Step 3
using [
] keys.
/
5
VC-M301HM/LM 3/2/99 11:56 am Page 9
AUTO INSTALLATION
PRESS SET KEY TO START
S E T : E N T E R M E N U : E X I T
Press STOP to switch on your VCR.
This model will automatically tune in the TV channels in your area.
This model will automatically tune in the TV channels in your area.
VCR RESET
1.Press STOP to switch on the VCR.
2.Press and hold MENU and Channel
buttons together on the front of the VCR for 10
seconds.
3.The AUTO INSTALLATION screen should now be showing on your TV.
4.Follow the on-screen display to proceed with installation.
All the programmes should now be correctly tuned in and the clock
set.
set.
INSTALLING YOUR VCR
AUTO INSTALLATION
Refer to the CUSTOMISED INSTALLATION chapter if:
●
Your VCR could not tune automatically - due to for example poor reception.
●
You wish to re-arrange the channel order.
●
You wish to change the time on the clock.
●
If the screen above does not appear, follow the
procedure VCR RESET below.
procedure VCR RESET below.
The screen opposite should be showing on
your TV.
your TV.
Follow the instructions from the screens.
(Auto tune will take a few minutes to complete)
(Auto tune will take a few minutes to complete)
On completion, the MOVE MENU will appear
showing the present channel order. Press
MENU to exit.
The clock screen will now appear. If you
experience any difficulties setting the clock,
refer to MANUALLY SETTING THE CLOCK.
showing the present channel order. Press
MENU to exit.
The clock screen will now appear. If you
experience any difficulties setting the clock,
refer to MANUALLY SETTING THE CLOCK.
If you wish to customise the channel order refer
to MANUALLY SORTING CHANNELS.
to MANUALLY SORTING CHANNELS.
6
VC-M301HM/LM 3/2/99 11:56 am Page 10
Click on the first or last page to see other VC-M311HM (serv.man5) service manuals if exist.