DOWNLOAD Sharp VC-M311HM (serv.man5) Service Manual ↓ Size: 1.91 MB | Pages: 34 in PDF or view online for FREE

Model
VC-M311HM (serv.man5)
Pages
34
Size
1.91 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
VCR / Operation manual
File
vc-m311hm-sm5.pdf
Date

Sharp VC-M311HM (serv.man5) User Manual / Operation Manual ▷ View online

TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket.  If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.)  If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide: 
blue wire to the terminal marked N or coloured black or blue. 
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician.  Do not use the VCR. 
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse.  The VCR does
not have a mains power switch.  When
connected to the mains, the unit will draw
current at all times to power the clock.  Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked           (ASTA) or         (BSI) to BS-1362.  Remove the
fuse cover as shown.  Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM  3/2/99 11:57 am  Page 34
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket.  If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.)  If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide: 
blue wire to the terminal marked N or coloured black or blue. 
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician.  Do not use the VCR. 
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse.  The VCR does
not have a mains power switch.  When
connected to the mains, the unit will draw
current at all times to power the clock.  Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked           (ASTA) or         (BSI) to BS-1362.  Remove the
fuse cover as shown.  Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM  3/2/99 11:57 am  Page 34
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket.  If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.)  If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide: 
blue wire to the terminal marked N or coloured black or blue. 
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician.  Do not use the VCR. 
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse.  The VCR does
not have a mains power switch.  When
connected to the mains, the unit will draw
current at all times to power the clock.  Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked           (ASTA) or         (BSI) to BS-1362.  Remove the
fuse cover as shown.  Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM  3/2/99 11:57 am  Page 34
TO REPLACE THE MAINS PLUG:
If the plug fitted is unsuitable for the mains socket in your home, cut off the plug, remove the
fuse and dispose of the cut-off plug safely.
Severe electric shock may occur if you connect the cut-off plug to a
mains socket.  If a new plug is fitted, observe the wiring code supplied
by the plug manufacturer (and given below.)  If you have any doubt,
consult a qualified electrician.
The wires in the mains cable are colour coded as follows: blue = neutral, brown = live.
As the colours of the wires may not correspond with the terminals in your plug, connect the
wires following plug manufacturer's guide: 
blue wire to the terminal marked N or coloured black or blue. 
brown wire to the terminal marked L or coloured red or brown.
Ensure neither the brown nor the blue wire is connected to the earth
terminal in your plug.
Do not allow water to come into contact with the power supply cord or
plug.
A damaged power supply cord or loose plug may cause electric shock.
Contact your SHARP dealer or a qualified electrician.  Do not use the VCR. 
This VCR is suitable only for connection to UK
mains. The unit is fitted with a moulded 3-pin
mains plug with a 3-amp fuse.  The VCR does
not have a mains power switch.  When
connected to the mains, the unit will draw
current at all times to power the clock.  Be sure
to unplug the VCR when it is not to be used for
several months.
TO REPLACE THE FUSE:
You must use a 3-amp fuse, marked           (ASTA) or         (BSI) to BS-1362.  Remove the
fuse cover as shown.  Replace the fuse and re-fit the fuse cover securely into the plug.
ASA
CONNECTING TO THE MAINS
30
VC-M301HM/LM  3/2/99 11:57 am  Page 34
Page of 34
Display

Sharp VC-M311HM (serv.man5) User Manual / Operation Manual ▷ Download