Sharp VC-M302HM (serv.man4) User Manual / Operation Manual ▷ View online
GB-21
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various sources, for example a camcorder, onto
a video tape using your VCR.
a video tape using your VCR.
For example, recording from a camcorder connected to LINE 1 IN/DECODER on your VCR:
1.
Load tape into the VCR.
2.
If you wish to record from a source connected to
LINE 1 IN/OUT, select
LINE 1 IN/OUT, select
AV
.
NOTE:
•
There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
refer to your equipment operation manuals for further information.
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-22
SPECIAL FEATURES ON YOUR VCR
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in standby,
preventing children from operating the VCR.
preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold
on the remote control for about 2 seconds.
flashes and then
remains lit on the VCR display confirming that CHILD LOCK
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold
for about 2 seconds.
starts flashing and then disappears. CHILD LOCK is disengaged.
NOTES:
•
If you attempt to change modes by pressing another button while CHILD LOCK is on,
the
the
indicator will flash on the VCR display.
•
If power is interrupted for more than 60 seconds (due to power failure etc), CHILD LOCK
may disengage.
may disengage.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-23
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
It should not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to confirm.
3.
CHANNEL PRESET
will be
highlighted. Press
SET
.
4.
Press [
/
] to select
CHANNEL
.
5.
IMPORTANT NOTE:
(VC-M302LM) model only.
Press
to select CH or CC. This will
determine whether off air (CH) or cable
(CC) is tuned first. Note that both off air
and cable will be tuned regardless of the
setting.
6.
Press [
/
] to start tuning in either
direction. Tuning will stop when a channel
is received. If it is not the desired channel,
press [
/
] to continue tuning.
7.
Press [
/
] to select
FINE
TUNING
. Press and hold [
/
] until
the sharpest colour picture is obtained.
8.
Press [
/
] to select
SKIP
.
The SKIP function determines whether the
channel can be selected when using the
CHANNEL
/
instead of the
NUMBER BUTTONS
.
9.
Press [
/
] to select ON or OFF for
this option.
10.
Press
SET
to confirm.
11.
Press
MENU
to leave this function.
C HANN E L
P R E S E T
C HANN E L S O R T
C L O C K
➔
P R E S E T
1
CHANN E L
CH 2 1
F I N E T UN I NG
▲
▲
S K I P
ON
O F F
CABLE RECEPTION
(VC-M302LM MODEL ONLY)
Station
Signals VHF
Real
Channel
Numbers
A
B
C
D
E
F
G
H
J
01
02
03
04
05
06
07
08
09
02
03
04
05
06
07
08
09
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
GB-24
CUSTOMISED INSTALLATION
MANUALLY SORTING CHANNELS
Sorting the channels into your preferred order
1.
Press
MENU
.
2.
Press [
/
] to select SET UP. Press
SET
to
confirm.
3.
Press [
/
] o select CHANNEL SORT. Press
SET
to confirm.
4.
Press [
/
/
/
] to highlight the
channel to be moved. Press
SET
to confirm.
5.
Press [
/
/
/
] to highlight the new
position for the channel. Press
SET
to confirm.
6.
If any more channels are to be moved,repeat
procedure from step 4.
procedure from step 4.
7.
When all the channels are in your preferred
order, press
order, press
MENU
to leave the MENU
function.
MENU SCREEN
2.
MOD E
S E T U P
MOV E
1 / 5
1 CH 2 1
7
1 3
2 CH 3 2
8
1 4
3 CH 4 3
9
1 5
4 CH 5 4
1 0
1 6
5
CH 6 5
1 1
1 7
6
1 2
1 8
5.
MOV E
1 / 5
1
CH 6 5
7
1 3
2 CH 2 1
8
1 4
3 CH 3 2
9
1 5
4 CH 4 3
1 0
1 6
5 CH 5 4
1 1
1 7
6
1 2
1 8
4.
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
Click on the first or last page to see other VC-M302HM (serv.man4) service manuals if exist.