Sharp Electronics (UK) Limited
Originator AvW Supervisor Approval Date / / Reference TB-T9612010
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
Month of Issue:
VIDEO TECHNICAL BULLETIN
Page 1 of 1
SYMPTOM When making a timer recording, with the clock set in the 12 hour mode, the recording
stop time fails.
This condition only happens if the start time is set before 12 o'clock and the stop time
is after 12 o'clock. ie record start time is 11.00AM and the stop time is 1.00PM
This will also happen if the start time is 11.00PM and the stop time is 1.00AM.
Note that this phenomena only occurs if the numeric keys on the remote control are
used to set the timer.
The software does not recognise 1.00PM as the stop time and continues to record
until the tape runs out.
If the customer complains of the above phenomena then fit the new version of the
main microprocessor ( IC801 ), which has corrected software fited.