DOWNLOAD Sharp TU-32GD1E (serv.man12) Service Manual ↓ Size: 35.82 KB | Pages: 1 in PDF or view online for FREE

1. Voltages at test points are measured on exclusive

AC adapter or the stable  supply voltage of AC 120V.
Signals are fed by a color bar signal generator for
servicing purpose and the above voltages are
measured with a 20k ohm/V tester.

RESISTOR
1. The unit of resistance “

Ω

” is omitted.

(K=k

Ω

=1000 

Ω

,  M=M

Ω

).

2. All resistors are ± 5%,  unless otherwise noted.

(J= ± 5%, F= ± 1%, D= ± 0.5%)

3. All resistors are 1/10W,  unless otherwise noted.
4. All resistors are Carbon type,  unless otherwise

noted.

 

C

 : Solid

W

 : Cement

 

S

 : Oxide Film

 

T

 : Special

 

N

 : Metal Coating

CAPACITOR
1. All capacitors are 

µ

F,  unless otherwise noted.

(P=pF=

µµ

F).

2. All capacitors are 50V,  unless otherwise noted.
3. All capacitors are Ceramic type,  unless otherwise

noted.

(ML): Mylar

(TA): Tantalum

(PF): Polypro Film

(ST): Styrol

PARTS MARKED WITH  “

å

”  (

)   A R E

IMPORTANT FOR MAINTAINING THE SAFETY OF
THE SET.  BE SURE TO REPLACE THESE PARTS
WITH SPECIFIED ONES FOR MAINTAINING THE
SAFETY AND PERFORMANCE OF THE SET.

LES PIECES MARQUEES “

å

” (                )SONT

IMPORTANTES POUR MAINTENIR LA SECURITE
DE L'APPAREIL.
NE REMPLACER CES PIEDES QUE PAR DES
PIECES DONT LE NUMERO EST SPECIFIE POUR
MAINTENIR LA SECURITE ET PROTEGER LE BON
FONCTIONNEMENT DE L'APPAREIL.