Sharp LC-M3700 (serv.man30) User Manual / Operation Manual ▷ View online
GB
8
Part Names – Remote Control Unit
INPUT
RETURN
MENU
STANDBY/ON
ENLARGE
WIDE
LCD MONITOR
ENTER
VOL
Numbers within refer to the main page(s) where the topic is explained.
Signal transmitter
Remote control unit
STANDBY/ON
MENU····································
VOL +/– ··································
28
ENLARGE
29
INPUT
29
RETURN
30
30
WIDE·····································
29
Cursor control ('/"/\/|)············
30
ENTER··································
30
29
9
GB
Intr
oduction
Removing the battery cover
Cautions regarding remote control unit
» Do not expose the remote control unit to shock. In addition, do not
expose the remote control unit to liquids, and do not place it in an
area with high humidity.
area with high humidity.
» The remote control unit may not work properly if the remote control
sensor is under direct sunlight or strong lighting.
In such cases, change the angle of the lighting or the monitor, or
operate the remote control unit closer to the remote control sensor.
In such cases, change the angle of the lighting or the monitor, or
operate the remote control unit closer to the remote control sensor.
Cautions regarding batteries
Improper use of batteries can result in chemical leakage
or explosion. Be sure to follow the instructions below.
or explosion. Be sure to follow the instructions below.
» Do not mix old and new batteries, or batteries of different
types.
» Do not charge or disassemble batteries.
» Place batteries with their terminals corresponding to the
» Place batteries with their terminals corresponding to the
± and — as indicated in the compartment.
» Do not short-circuit the batteries.
Caution
NOTE:
» The batteries supplied with this product may
have a shorter life expectancy due to storage
conditions. Replace with new batteries at the
earliest opportunity.
conditions. Replace with new batteries at the
earliest opportunity.
» If you will not use the remote control for a long
time, remove its batteries.
» If the remote control does not work, even with
new batteries, take the batteries out, check
whether they are facing the right way, then
replace them.
whether they are facing the right way, then
replace them.
Remote control operation range
If the remote control unit does not work well:
» Objects between the remote control unit and the remote
control sensor may prevent proper operation.
» Replace the batteries when they run low as this may shorten
the remote control operation range.
10
°
10
°
6 m
7 m
6 m
Remote
control sensor
control sensor
Gently hold down and
press in the arrow
direction.
press in the arrow
direction.
Part Names – Remote Control Unit (Continued)
GB
10
Make sure the following accessories are provided
with the product.
with the product.
Remote control unit (
× 1)
INPUT
RETURN
MENU
STANDBY/ON
ENLARGE
WIDE
LCD MONITOR
ENTER
VOL
R-6 (“AA” size,
UM/SUM-3) battery (
× 2)
Pages 9, 28 - 30
Page 9
AC cord, 3 m (
× 1)
Cable clamp (
× 1)
Screw (
× 1)
Cable binder (
× 3)
Page 17
Page 17
Page 27
» Operation manual
× 1
Supplied Accessories
Terminal cover mounting screw (
× 2)
Flat washer (
× 2)
Caution:
» This monitor is equipped with a temporary stand when shipped from the factory. Please note this stand is for temporary use
only until the monitor is properly mounted. Be sure to use a special-purpose AN-37ST1 table stand or AN-37AG1 wall-
mount bracket (both optional).
mount bracket (both optional).
Mounting Options.
21
* Product shape varies in
some countries.
Page 27
11
GB
Intr
oduction
Connection
and Installation
INPUT1
■ INPUT1: Terminals are provided for two types of video input signal.
Input Select
No matter which video signal is selected, the system uses the signal input to the audio terminals for
audio.
audio.
Related topic:
Input Select
*1 “Auto” (automatic colour system detection) is factory preset value.
Color System
52
52
55
INPUT 1
AUDIO
VIDEO
S-VIDEO
R -
- L
1
S-video
INPUT1
audio
audio
Video
Connecting Peripheral Equipment
Terminal type
BNC
S terminal
Compatible signals
NTSC (3.58/4.43), PAL, SECAM (*1)
NTSC (3.58/4.43), PAL, SECAM (*1)
Video
S-video
Click on the first or last page to see other LC-M3700 (serv.man30) service manuals if exist.