Sharp LC-M3700 (serv.man29) User Manual / Operation Manual ▷ View online
GB
58
[Example: 4] Disabling remote control, monitor buttons and power operations (RS-232C daisy-chain
connection)
Note: Values returned by monitors are omitted because they vary depending on the number of
connected monitors.
PCL+xxxx
←(“xxxx” is the current PIN. “xxxx” is not necessary if no PIN is set.)
LREM001+
←Locks remote control
LBTN001+
←Locks monitor buttons
LPOW001+
←Locks power operation
PSE+xxxx
←(“xxxx” is new PIN.)
[Example: 5] Disabling remote control operation, operation using monitor buttons, and switching to the
power standby state using those controls for a specific monitor (example: ID=2) in a chain
of monitors connected via RS-232C.
of monitors connected via RS-232C.
Note: Response messages are omitted for convenience as the number of connected monitors
varies.
IDLK0002
←Select monitor with ID=2
PCLRxxxx
←(“xxxx” is the current PIN. “xxxx” is not necessary if no PIN is set.)
LREM0001
←Locks remote control
LBTN0001
←Locks monitor buttons
LPOW0001
←Locks power operation
PSETxxxx
←(“xxxx” is new PIN.)
IDLK0000
←Exit “IDLK” command
Settings and Adjustments (Continued)
If you forget your PIN
If you forget the PIN which you yourself set, perform the following operation when the PIN input screen
is displayed.
This allows you to temporarily unlock the function.
\
|
MENU
ENTER
59
GB
Settings and
Adjustments
● Enlarge
■ You can set up 4 or 9 monitors and integrate them into a single screen to display video. Each
monitor displays an enlargement of 1/4 or 1/9 of the original image.
How to use the “Enlarge” feature
4 screen monitor set-up
4 monitors
1
3
2
4
1
3
2
4
9 screen monitor set-up
9 monitors
5
4
6
2
1
3
8
7
9
4
5
6
7
8
9
1
2
3
Settings and Adjustments (Continued)
GB
60
■ In PC mode, you can select the following screen sizes to suit the input signal.
Input signal
Normal
Full
Dot by Dot
Cinema
Displays image so it fills the
screen vertically, while
maintaining the original
aspect ratio.
screen vertically, while
maintaining the original
aspect ratio.
Displays image so it fills the
screen vertically, while
maintaining the original
aspect ratio.
screen vertically, while
maintaining the original
aspect ratio.
An image fully fills the screen.
Detects the resolution of the
signal and displays an image
with the same number of
pixels on the screen.
signal and displays an image
with the same number of
pixels on the screen.
Detects the resolution of the
signal and displays an image
with the same number of
pixels on the screen.
signal and displays an image
with the same number of
pixels on the screen.
Keep the original aspect ratio
in a full screen display. The
top and bottom of the image
is slightly cropped.
in a full screen display. The
top and bottom of the image
is slightly cropped.
Keep the original aspect ratio
in a full screen display. The
top and bottom of the image
is slightly cropped.
in a full screen display. The
top and bottom of the image
is slightly cropped.
640 x 400, 720 x 400
640 x 480, 800 x 600
640 x 480, 800 x 600
832 x 624, 1024 x 768
An image fully fills the screen.
Detects the resolution of the
signal and displays an image
with the same number of
pixels on the screen.
signal and displays an image
with the same number of
pixels on the screen.
An image fully fills the screen.
848 x 480
852 x 480
852 x 480
1280 x 768
1280 x 1024
5:4 image
4:3 image
16:9 image
1366 x 768
16:9 image
What is “Dot by Dot”?
■
This function detects the resolution of the signal from a PC and displays an image with the same
number of pixels, dot by dot. (See “Appendix 1: PC compatibility chart” on page 66).
● Wide Mode (INPUT3 (RGB) /(PC (analog))
Settings and Adjustments (Continued)
61
GB
Settings and
Adjustments
Normal
For 4:3 “Standard” pictures. A side bar appears on
each side.
each side.
Full 14 : 9
For 14:9 squeeze pictures. A thin side bar appears
on each side.
on each side.
Zoom 14 : 9
For 14:9 letterbox pictures. An image vertically fills
the screen.
the screen.
Panorama
In this mode the picture is progressively stretched
toward each side of the screen.
toward each side of the screen.
Full
Takes an image which has been compressed from
16:9 to 4:3, restores it to the original 16:9, and
displays it so it fills the entire screen.
16:9 to 4:3, restores it to the original 16:9, and
displays it so it fills the entire screen.
Cinema 14 : 9
Displays Cinescope 14:9 size movie software so it fills
the entire screen.
the entire screen.
Cinema 16 : 9
For 16:9 letterbox pictures. An image fully fills the
screen.
screen.
Displays edge portion of the image which is normally
cut off.
cut off.
Underscan
● Wide Mode (Video, S-video, Input 3 COMPONENT)
The desired screen size can be selected to suit the input broadcast or software.
■
The following 8 screen sizes can be selected.
Settings and Adjustments (Continued)
Special processing is performed for underscan, so switching takes more time than other screen sizes.
This is not a malfunction.
“Underscan” employs special processing, so only some picture related adjustments can be used.
This is not a malfunction.
“Underscan” employs special processing, so only some picture related adjustments can be used.
Click on the first or last page to see other LC-M3700 (serv.man29) service manuals if exist.