Sharp LC-M3700 (serv.man28) User Manual / Operation Manual ▷ View online
GB
24
M6 30mm length
2. Attach the wall-mount bracket (with the
angle set) to the back of the Wide LCD
Monitor.
Monitor.
●Make sure all cables and cords are connected
and bundled (see page 27).
●Attach the terminal cover to the back of the
monitor and align the wall-mount screw holes
(Marking A: 4 locations) with the holes (4
locations) on the back of the Wide LCD Monitor.
(Marking A: 4 locations) with the holes (4
locations) on the back of the Wide LCD Monitor.
●Use the supplied M6 30 mm length screws (4
screws) to securely fasten the wall-mount bracket
in place.
in place.
Attaching wall-mount bracket to LC-M3700 (horizontal
mount)
mount)
Mounting Options (Continued)
Mounting the Wide LCD Monitor
Wall-mount bracket
Marking A
Marking A
• Be sure to use 2 people when installing the Wide LCD Monitor to the base bracket.
• Be sure to perform Steps Å and ı below. Just performing Step Å could result in the display falling off, which is very
• Be sure to perform Steps Å and ı below. Just performing Step Å could result in the display falling off, which is very
dangerous.
Install the wall-mount bracket attached to the Wide LCD Monitor to the base bracket.
Å Hang the square holes ( ) of the wall-mount bracket on the hooks (page 22) of the base bracket.
ı Tighten the wall-mount bracket and base bracket screws.(Be sure to do this.)
ı Tighten the wall-mount bracket and base bracket screws.(Be sure to do this.)
Caution
Tighten from the bottom.
M5 screws 8mm length (2 screws)
Wall
Base bracket
Make sure the hooks are
engaged.
engaged.
Wide LCD
Monitor
Å
ı
M6 30mm length
Attaching wall-mount bracket to LC-M3710 (vertical
mount)
mount)
25
GB
Connection
and Installation
Outside dimensional drawings
»With table stand attached
Mounting Options (Continued)
909
810
99.5
(82.1)
58.8
108.4
290
474.5
949
98.4
173.8
(173.8)
572
642
356
821.6
462.8
12
12.3
37
13
(80.5)
55.5
154
6.5
36
24
18.5
8
65
66.1
105
290
265
370
66.1
200
155
38.5
200
50
170
223
142
72.5
115
200
335.8
188.3
13
160
120
with the
door opened
door opened
Unit: mm
GB
26
Mounting Options (Continued)
Outside dimensional drawings
»With wall-mount bracket attached
(0
°)
(5
°)
(10
°)
(15
°)
(20
°)
LC-M3700 (Horizontal mount)
30
5
°
129.5
171.7782
10
°
212.9
252.5
290.4
572
129.5
122.3
114.2
105.5
96
15
°
20°
Unit: mm
949
129.5
15
Wall-mount bracket centre
Panel centre
129.5
30
(0
°)
LC-M3710 (Vertical mount)
27
GB
Connection
and Installation
Bundling Cables
■ Cables and cords connected to the back of the monitor can be bundled using the supplied
cable clamp and cable binders. This will prevent stray or disorganised cables at the back of
the monitor.
the monitor.
Cable binder
To external devices
Bundle of cables
Wrap the cable binder
around the bundle of
cables.
around the bundle of
cables.
Put the thinner end of
cable binder through
the hole as shown, and
tighten appropriately.
cable binder through
the hole as shown, and
tighten appropriately.
"Rear view
Cable binder
To external devices
Bundle of cables
Wrap the cable binder
around the bundle of
cables.
around the bundle of
cables.
Put the thinner end of
cable binder through
the hole as shown, and
tighten appropriately.
cable binder through
the hole as shown, and
tighten appropriately.
"With terminal cover closed
How to use the supplied terminal cover mounting screws and flat washers
» Use terminal cover mounting screws to firmly fix the terminal cover if difficult to close after
» Use terminal cover mounting screws to firmly fix the terminal cover if difficult to close after
bundling the cables.
Click on the first or last page to see other LC-M3700 (serv.man28) service manuals if exist.