DOWNLOAD Sharp LC-M3700 (serv.man28) Service Manual ↓ Size: 2.81 MB | Pages: 29 in PDF or view online for FREE

Model
LC-M3700 (serv.man28)
Pages
29
Size
2.81 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / part-1 Cover contents, Introduction, Connections installation, Basic operation
File
lc-m3700-sm28.pdf
Date

Sharp LC-M3700 (serv.man28) User Manual / Operation Manual ▷ View online

GB
Intr
oduction
Removing the battery cover
Cautions regarding remote control unit
» Do not expose the remote control unit to shock. In addition, do not
expose the remote control unit to liquids, and do not place it in an
area with high humidity.
» The remote control unit may not work properly if the remote control
sensor is under direct sunlight or strong lighting.
In such cases, change the angle of the lighting or the monitor, or
operate the remote control unit closer to the remote control sensor.
Cautions regarding batteries
Improper use of batteries can result in chemical leakage
or explosion. Be sure to follow the instructions below.
» Do not mix old and new batteries, or batteries of different
types.
» Do not charge or disassemble batteries.
» Place batteries with their terminals corresponding to the
± and — as indicated in the compartment.
» Do not short-circuit the batteries.
Caution
NOTE:
» The batteries supplied with this product may
have a shorter life expectancy due to storage
conditions. Replace with new batteries at the
earliest opportunity.
» If you will not use the remote control for a long
time, remove its batteries.
» If the remote control does not work, even with
new batteries, take the batteries out, check
whether they are facing the right way, then
replace them.
Remote control operation range
If the remote control unit does not work well:
» Objects between the remote control unit and the remote
control sensor may prevent proper operation.
» Replace the batteries when they run low as this may shorten
the remote control operation range.
10
°
10
°
6 m
7 m
6 m
Remote
control sensor
Gently hold down and
press in the arrow
direction.
Part Names – Remote Control Unit (Continued)
GB
 
10
Make sure the following accessories are provided
with the product.
Remote control unit (
× 1)
INPUT
RETURN
MENU
STANDBY/ON
ENLARGE
WIDE
LCD MONITOR
ENTER
VOL
R-6 (“AA” size,
UM/SUM-3) battery (
× 2)
Pages 9, 28 - 30
Page 9
AC cord, 3 m (
× 1)
Cable clamp (
× 1)
Screw (
× 1)
Cable binder (
× 3)
Page 17
Page 17
Page 27
» Operation manual 
× 1
Supplied Accessories
Terminal cover mounting screw (
× 2)
Flat washer (
× 2)
Caution:
» This monitor is equipped with a temporary stand when shipped from the factory. Please note this stand is for temporary use
only until the monitor is properly mounted. Be sure to use a special-purpose AN-37ST1 table stand or AN-37AG1 wall-
mount bracket (both optional). 
 Mounting Options.
21
* Product shape varies in
some countries.
Page 27
11 
GB
Intr
oduction
Connection
and Installation
INPUT1
■ INPUT1: Terminals are provided for two types of video input signal. 
 Input Select
No matter which video signal is selected, the system uses the signal input to the audio terminals for
audio.
Related topic:
 Input Select
*1 “Auto” (automatic colour system detection) is factory preset value. 
 Color System
52
52
55
INPUT 1
AUDIO
VIDEO
S-VIDEO
R -
- L
1
S-video
INPUT1
audio
Video
Connecting Peripheral Equipment
Terminal type
BNC
S terminal
Compatible signals
NTSC (3.58/4.43), PAL, SECAM (*1)
NTSC (3.58/4.43), PAL, SECAM (*1)
Video
S-video
GB
 
12
Connecting Peripheral Equipment (Continued)
INPUT2
INPUT 2 (INPUT/OUTPUT)
VIDEO
AUDIO
R -
- L
2
INPUT2
audio
Video
Terminal type
RCA
Compatible signals
NTSC (3.58/4.43), PAL, SECAM (*2)
Video
■ INPUT2: Input or output can be selected for INPUT2.  (*1) 
 INPUT2 Select
This setting cannot be switched when INPUT2 is currently being displayed.
When this is set to “Output”, video signals input from the INPUT1 video input terminal are output. (*3)
An audio signal is output with this setting (i.e. the audio signal corresponding to the video currently
being displayed). (*4)
Related topic:
 INPUT2 Select
*1 “Input” is factory preset value.
*2 “Auto” (automatic colour system detection) is factory preset value. 
 Color System
*3 Outputs video from INPUT1, regardless of the currently displayed signal.
*4 If the “INPUT2 Select” is set to “Output”, audio output is as follows.
54
54
55
Example 1
Input Selection
 : INPUT1
“Input Select”
 : AV
Example 2
Input Selection
 : INPUT3
“Input Select”
 : RGB
29
52
29
52
INPUT2 video output: Video from INPUT1
INPUT2 audio output: Audio from INPUT1
INPUT2 video output: Video from INPUT1
INPUT2 audio output: Audio from INPUT3
Page of 29
Display

Click on the first or last page to see other LC-M3700 (serv.man28) service manuals if exist.