Sharp LC-70UQ10KN (serv.man4) User Manual / Operation Manual ▷ View online
6
Using the remote control unit
Inserting the batteries
Before using the TV for the first time, insert the two supplied “AAA” size
batteries. When the batteries become depleted and the remote control unit fails
to operate, replace the batteries with new “AAA” size batteries.
1
Open the battery cover.
2
Insert the two supplied “AAA” size batteries.
• Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
3
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to
follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different
characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of
new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries
can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to
storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove
the batteries from it.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or
mercury.
Regulations concerning used batteries stipulate that batteries may no longer be
thrown out with the household rubbish. Deposit any used batteries free of charge
into the designated collection containers set up at commercial businesses.
Angle of the remote control unit
Use the remote control unit by pointing it towards the remote control sensor.
Objects between the remote control unit and sensor may prevent proper
operation.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of the
unit.
• The remote control unit may not work properly if the
remote control sensor of the TV is under direct sunlight
or strong lighting. In such cases, change the angle of
the lighting or the TV, or operate the remote control unit
closer to the remote control sensor.
Preparation
5 m
Remote control sensor
7
TV (front/side view)
This panel emits a signal towards the 3D glasses you wear when viewing 3D images.
Refer to page 75 for details.
I
3D mode: Blue illumination
2D mode: White illumination
TV (rear view)
J
The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC AUDIO
(L/R)). However, the proper item must be selected in the “Audio select” menu (refer to page 46 for
details).
TV (rear view) — continued
K
When the headphone is connected to the OUTPUT terminal, the audio can be output from the
speakers (Page 47).
L
HDCP 2.2 copy protected signal can be viewed via HDMI1 only.
WARNING
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high
• Do not set the volume at a high level. Hearing experts advise against extended listening at high
volume levels.
NOTE
• Use a product with the specified dimensions for optimal connection to HDMI cable/USB device.
− HDMI: Body: (depth) 12 mm or less/(length) 32 mm or less
− USB: Body: (depth) 10 mm or less/(length) 57 mm or less
Connector: (depth) 7 mm or less
Part names and functions
a
(Standby/ON)
MENU (Menu)
b
(Input source)
:r/s
(Programme
[Channel])
i+/-
(Volume)
Illumination LED*
1
OPC sensor (Page 36)
Remote control sensor (Page 6)
USB 3 port
USB 2 (HDD) port
ETHERNET terminal
DIGITAL AUDIO OUTPUT terminal
Antenna terminal
Satellite antenna terminal
HDMI 2/PC AUDIO (L/R) Jack *2
8
Remote control unit
1
>a
(Standby/On) (Page 18)
2
ATV
Access conventional analogue TV mode.
DTV
DTV
Access digital TV mode.
SAT
SAT
Access satellite mode.
RADIO
RADIO
DTV/SAT: Switch between radio and
data mode.
• When only data broadcasting (no radio
broadcasting) is transmitted by DVB,
the radio broadcasting will be skipped.
3
EXT MEDIA buttons
EXT MEDIA buttons are used for AQUOS
LINK functions and USB-recording
functions, etc.
• AQUOS LINK (Pages 30_33):
Interactively operate compatible
system devices using a single remote
control unit.
• USB-recording (Pages 51_54):
Record a programme you are
watching.
4
Numeric buttons 0_9
Set the channel. Enter desired numbers.
Set the page in teletext mode.
• When the five Nordic countries
(Sweden, Norway, Finland, Denmark
or Iceland) are selected in the country
setting from initial auto installation
(Page 14), DTV services are four
digits. When another country is
selected, DTV services are three digits.
5
A
(Flashback)
Return to the previously selected
channel or external input.
6
AV MODE (Page 35)
Select audio/video settings.
f
f
(Wide mode) (Pages 45, 58 and 59)
Select a wide mode.
7
7
(Sound mode) (Page 19)
Select a sound multiplex mode.
8
i+/-
(Volume)
Increase/decrease TV volume.
9
e
(Mute)
TV sound on/off.
0
(HOME)
Display the “HOME” screen for enjoying
Internet connection and Home network
functions, as well as performing settings
for the TV.
Q
3D (Pages 67_76)
Select between 3D and 2D image
viewing.
W
a/b/c/d (Cursor)
Select a desired item.
;
;
Execute a command.
ATV/DTV/SAT: Display “CH list” when no
other “Menu” screen is running.
E
>
ATV/DTV/SAT: Exit the “Menu” screen.
AQUOS NET+: Return to the start page.
R
CONTROL (Pages 52, 54 and 57)
Display a panel to operate some
functions on the screen.
T
p
(Display information) (Page 19)
Display the station information (channel
number, signal, etc.) on the screen.
P. INFO
P. INFO
Display programme information
transmitted through digital video
broadcasting (DTV/SAT only).
Y
b
(INPUT) (Page 18)
Select an input source.
U
ECO (Standard/Advanced/Off)
(Page 39)
Select “Energy save” setting.
I
m
(Teletext) (Page 24)
ATV: Display analogue teletext.
DTV/SAT: Select MHEG-5 or teletext for
DTV/SAT.
O
:r/s
ATV/DTV/SAT: Select the TV channel.
AQUOS NET+: Scrolls pages up/down.
P
MENU
“Menu” screen on/off (Page 13).
A
EPG (Pages 21_23)
DTV/SAT: Display the EPG screen.
S
6
(Return)
ATV/DTV/SAT: Return to the previous
screen.
AQUOS NET+: Return to the previous
page (This may not function for some
services).
D
Buttons for useful operations
[
[
(Subtitle) (Pages 24 and 44)
Switch subtitle languages on/off.
k
k
(Reveal hidden teletext) (Page 24)
1
(Subpage) (Page 24)
3
(Freeze/Hold) (Page 24)
Freeze a moving image on the screen.
Teletext: Stop updating teletext pages
automatically or release the hold mode.
F
R/G/Y/B (Colour) buttons
The coloured buttons are
correspondingly used to select the
coloured items on the screen (e.g., EPG,
MHEG-5, teletext).
G
NETFLIX button
Display the Netflix screen.
(See page 66.)
• Netflix is available in certain countries.
Unlimited membership required.
More information at www.netflix.com
Part names and functions
4
5
3
6
7
7
8
11
12
13
10
2
1
15
14
16
17
18
17
18
19
21
22
9
20
23
24
24
25
4
5
3
6
7
7
8
11
12
13
10
2
1
15
14
16
17
18
17
18
19
21
22
23
24
23
24
9
20
LC-60UQ10EN
LC-60UQ10KN
LC-70UQ10EN
LC-70UQ10KN
LC-80UQ10EN
LC-80UQ10KN
LC-60UQ10E
LC-70UQ10E
LC-80UQ10E
9
Operation overview
Follow the steps below one by one when using the TV. Some steps may not be necessary
depending on your TV installation and connection.
1. Preparation — Connecting the TV
w
w For 60/70 inch models
w
w For 80 inch models
NOTE
• The cable tie can be moved from to .
• Place the TV close to the AC
outlet, and keep the power
plug within reach.
• Product shape varies in some
countries.
w
n
Plug the standard DIN45325 plug (IEC 169-2)
75 q coaxial cable.
w
o
Connect the satellite antenna cable.
w
p
Insert a CA card into the CI slot to watch scrambled
broadcasts (Page 11).
w
q
Plug in the AC cord.
2. Preparation — Setting the TV
w
n
Press a on the TV (Page 18).
w
o
Run the initial auto installation (Page 14).
w
w Language setting
w
w Home/Store setting
w
w Country setting
w
w PIN setting
w
w Channel search setting
• Digital search
− Terrestrial
− Cable
• Analogue search
• Satellite search
Start searching channels
w
p
Congratulations!
Now you can watch TV.
• If necessary, adjust the antenna to attain maximum signal
reception (Page 17).
Quick guide
Click on the first or last page to see other LC-70UQ10KN (serv.man4) service manuals if exist.