DOWNLOAD Sharp LC-70UQ10KN (serv.man2) Service Manual ↓ Size: 4.2 MB | Pages: 56 in PDF or view online for FREE

Model
LC-70UQ10KN (serv.man2)
Pages
56
Size
4.2 MB
Type
PDF
Document
Handy Guide
Brand
Device
TV / LCD / Setup Guide
File
lc-70uq10kn-sm2.pdf
Date

Sharp LC-70UQ10KN (serv.man2) Handy Guide ▷ View online

6
Initial installation
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary 
depending on your TV installation and connection.
 
n
Connect an antenna cable to the 
antenna terminal.
Only connect a satellite antenna 
to models capable of receiving 
satellite broadcasts
 
o
If necessary, insert a CA card into 
the CI slot to watch scrambled 
broadcasts.
 
p
Plug the AC cord into the AC 
outlet.
H
  For 60/70 inch models 
• 
Place the TV close to the AC 
outlet, and keep the power plug 
within reach. 
• 
Product shape varies in some 
countries.
H
  For 80 inch models
• 
Place the TV close to the AC 
outlet, and keep the power plug 
within reach. 
• 
Product shape varies in some 
countries.
 
q
Press a on the TV.
 
r
Run the initial auto installation.
• 
Follow the guide on the TV screen 
to set the following settings.
 
Language setting
 
Home/Store setting
 
Country setting*
1
 
PIN setting
 
Channel search setting
• 
Digital search
 
Terrestrial
 
Cable*
2
• 
Analogue search
• 
Satellite search*
1
 
I
Some models do not have this setting.
 
J
Refer to the operation manual stored 
in the TV for details on the settings for 
cable broadcasts.
Start searching 
channels
Viewing the operation 
manual stored in the TV
• 
Refer to the operation manual 
(JPEG) stored in the TV for 
details.
 
1
Press 
 (HOME) and the 
“HOME” screen will be 
displayed.
 
2
Press a/b/c/d to select 
“Manual”, and then press 
;.
 
3
Select the folder/file you wish 
to view.
NOTE
• 
To change the language of the 
operation manual, please select the 
folder of the language to which you 
would like to change.
The language of the operation manual 
will not change even if the OSD 
language in the language settings from 
the TV main menu is changed.
• 
If you open the operation manual during 
USB-recording, a caution screen will be 
displayed that confirms your consent to 
stop recording.
• 
When the operation manual is 
displayed, returning to the “HOME” 
screen is not possible by pressing 6 
(Return). Press   (HOME) on the 
remote control to return to the “HOME” 
screen.
7
GB
Operation manual content stored in the TV
Introduction
Dear SHARP customer ................................GB01
Contents ......................................................GB01
Important safety precautions .......................GB02
Supplied accessories ...................................GB04
Optional accessories ...................................GB04
Preparation
Attaching the stand unit ...............................GB05
Using the remote control unit .......................GB06
Part names and functions
TV (front/side view) ......................................GB07
TV (rear view) ..............................................GB07
Remote control unit ......................................GB08
Quick guide
Operation overview ......................................GB09
Inserting the CA card into the CI module ..... GB11
Recording CAM PIN setting ......................... GB11
CI plus 1.3 Standard .................................... GB11
Using the HOME screen ..............................GB12
Using the Menu screen ................................GB13
Using Software keyboard .............................GB13
Initial auto installation
Initial auto installation ..................................GB14
Watching TV
Daily operation .............................................GB18
Favourite Channel Information ....................GB20
Operator profile ............................................GB20
EPG .............................................................GB21
Teletext ........................................................GB24
Connecting external devices
Introduction to connections ..........................GB26
Video connections .......................................GB27
Audio connections .......................................GB29
AQUOS LINK
Controlling HDMI devices using
  AQUOS LINK .............................................GB30
AQUOS LINK connection ............................GB31
AQUOS LINK setup .....................................GB32
Operating an AQUOS LINK device ..............GB32
Using a Smartphone with the TV .................GB34
Basic adjustment
Picture settings ............................................GB35
Audio settings ..............................................GB38
Power save settings .....................................GB39
View settings ................................................GB40
Individual setting — PIN ..............................GB43
Individual setting — Clock ...........................GB43
Individual setting — Language ....................GB44
Useful viewing functions
Optional features settings ............................GB45
Additional features .......................................GB48
Miracast (Mirroring) ......................................GB50
Other useful features
USB-recording .............................................GB51
How to operate USB-recording ....................GB52
SD/USB media/Home network ....................GB55
Selecting the picture size for photo mode ....GB56
USB device compatibility .............................GB58
Home network server compatibility ..............GB58
Selecting the picture size for video mode ....GB58
Connecting a PC
Connecting a PC ..........................................GB59
Displaying a PC image on the TV ................GB59
PC control of the TV ....................................GB62
Network setup
Connecting to the network ...........................GB64
Net TV
What is Net TV? ...........................................GB66
NETFLIX ......................................................GB66
Operations in Net TV ...................................GB66
Enjoying 3D image viewing
Before using the 3D glasses ........................GB67
Preparing for the 3D glasses .......................GB68
Using the 3D glasses ...................................GB69
Cautions for 3D image viewing ....................GB71
Display format for 3D and 2D images ..........GB72
Viewing 3D images ......................................GB73
Configuring the TV settings to enhance 
3D image viewing .....................................GB74
Specifications — 3D glasses  ......................GB76
Troubleshooting — 3D Images ....................GB76
Appendix
Troubleshooting ...........................................GB77
Updating your TV via DVB-T/T2/C/S/S2 ......GB79
Getting update information ..........................GB79
Information on the software licence for this 
product ......................................................GB80
Deactivating Netflix function ........................GB80
Updating your TV via USB/network .............GB80
Trademarks ..................................................GB81
Software licences for Net TV .......................GB82
Disclaimers for services using the Internet ..GB82
Specifications ...............................................GB83
Specifications (Wireless LAN) .....................GB84
Specifications (Bluetooth) ............................GB84
Environmental specifications .......................GB85
Mounting the TV on a wall ...........................GB85
Wall mount kit specifications ........................GB86
Dimensional drawings ..................................GB88
EU Energy Label for Televisions ..................GB90
8
Anfängliche Installation
Führen Sie bei der Inbetriebnahme des TV zunächst der Reihe nach die folgenden Schritte durch. Je nach TV-
Installation und Anschlüssen sind einige der Schritte eventuell nicht erforderlich.
 
n
Schließen Sie das Antennenkabel 
an die Antennenbuchse an.
Schließen Sie eine Satellitenantenne 
nur an Modelle an, die für den 
Empfang von Satellitenprogrammen 
geeignet sind.
 
o
Erforderlichenfalls die CA-Karte 
für verschlüsselte Programme in 
den CI-Steckplatz einsetzen.
 
p
Schließen Sie das Netzkabel an 
die Netzsteckdose an.
H
  Für 60/70-Zoll-Modelle
• 
Stellen Sie den TV nahe an einer 
Netzsteckdose auf und sorgen Sie 
dafür, dass der Netzstecker gut 
zugänglich ist.
• 
Das Produkt kann je nach Lieferland 
Unterschiede aufweisen.
H
  Für 80-Zoll-Modelle
• 
Stellen Sie den TV nahe an einer 
Netzsteckdose auf und sorgen Sie 
dafür, dass der Netzstecker gut 
zugänglich ist. 
• 
Das Produkt kann je nach Lieferland 
Unterschiede aufweisen.
 
q
Drücken Sie a am TV.
 
r
Führen Sie die anfängliche 
Autoinstallation durch.
• 
Befolgen Sie bei den 
nachfolgenden Einstellungen 
die auf dem TV-Bildschirm 
erscheinenden Anleitungen.
 
Sprache-Einstellung
 
Daheim/Geschäft-
Einstellung
 
Landeinstellung
*1
 
Geheimnummer 
-Einstellung
 
Kanalsuche-Einstellung
• 
Digitalsuche
 
Terrestrisch
 
Kabel*
2
• 
Analogsuche
• 
Satellitensuche*
1
 
I
Bei einigen Modellen ist diese 
Einstellung nicht vorhanden.
 
J
Weitere Informationen zu den 
Einstellungen für Kabelprogramme 
finden Sie in der auf dem TV 
gespeicherten Bedienungsanleitung.
Starten Sie die 
Kanalsuche
Anzeigen der auf dem 
TV gespeicherten 
Bedienungsanleitung
• 
Weitere Informationen finden Sie 
in der auf dem TV gespeicherten 
Bedienungsanleitung (JPEG).
 
1
Durch Drücken von 
 
(HOME) wird der „HOME“-
Bildschirm angezeigt.
 
2
Wählen Sie mit a/b/c/d 
„Manual“ und drücken Sie 
dann ;.
 
3
Wählen Sie den Ordner bzw. 
die Datei, die Sie ansehen 
möchten.
ZUR BEACHTUNG
• 
Zum Ändern der Sprache der 
Bedienungsanleitung wählen Sie bitte den 
Ordner der gewünschten Sprache.
Die Sprache der Bedienungsanleitung 
wird nicht geändert, selbst wenn die OSD-
Anzeigesprache im Hauptmenü des TV 
geändert wird.
• 
Wenn Sie die Bedienungsanleitung 
während der USB-Aufnahme öffnen, wird 
eine Bildschirm mit einem Warnhinweis 
angezeigt, in dem Sie bestätigen müssen, 
dass die Aufnahme beendet werden soll.
• 
Während die Bedienungsanleitung 
angezeigt wird, kann durch Drücken von 
6
 (Zurück) nicht wieder zum „HOME“-
Bildschirm gewechselt werden. Drücken 
Sie   (HOME) auf der Fernbedienung, 
um wieder zum „HOME“-Bildschirm zu 
wechseln.
9
DE
Auf dem TV gespeicherter Bedienungsanleitungsinhalt
Einleitung
Verehrter SHARP-Kunde ............................. DE01
Inhaltsverzeichnis ........................................ DE01
Wichtige Sicherheitshinweise ...................... DE02
Mitgeliefertes Zubehör ................................. DE04
Sonderzubehör ............................................ DE04
Vorbereitung
Anbringen des Ständers ... .......................... DE05
Benutzung der Fernbedienung .................... DE06
Bezeichnungen und Funktionen
TV (Vorderseite/Seitenansicht) .................... DE07
TV (Rückseite) ............................................. DE07
Fernbedienung ............................................. DE08
Kurzanleitung
Übersicht über die Bedienung ..................... DE09
Einsetzen der CA-Karte in das CI-Modul ..... DE11
Aufzeichnen von CAM PIN-Einstellungen ... DE11
CI Plus 1.3-Standard ................................... DE11
Verwenden des HOME-Bildschirms ............. DE12
Verwenden des Menüs ................................ DE13
Verwenden der Softwaretastatur ................. DE13
Anfängliche Autoinstallation
Anfängliche Autoinstallation ......................... DE14
Fernsehen
Täglicher Betrieb .......................................... DE18
Information bevorzugter Kanal ..................... DE20
Operatorprofil ............................................... DE20
EPG ............................................................. DE21
Teletext ........................................................ DE24
Anschließen von externen Geräten
Einführung zu den Anschlüssen .................. DE26
Videoanschlüsse .......................................... DE27
Audioverbindungen ...................................... DE29
AQUOS LINK
Steuern von HDMI-Geräten über 
AQUOS LINK ............................................ DE30
AQUOS LINK-Anschluss ............................. DE31
AQUOS LINK-Einstellungen ........................ DE32
Bedienen eines AQUOS LINK-Geräts ......... DE32
Verwenden eines Smartphones zusammen mit 
dem TV ..................................................... DE34
Grundeinstellung
Bildeinstellungen .......................................... DE35
Toneinstellungen .......................................... DE38
Stromspareinstellungen ............................... DE39
Bildeinstellungen .......................................... DE40
Individuelle Einstellung — Geheimnr. .......... DE43
Individuelle Einstellung — Uhrzeit ............... DE43
Individuelle Einstellung — Sprache ............. DE44
Praktische Betrachtungsfunktionen
Einstellungen für optionale Funktionen ........ DE45
Zusätzliche Funktionen ................................ DE48
Miracast (Spiegelung) .................................. DE50
Weitere praktische Funktionen
USB-Aufnahme ............................................ DE51
Betriebsweise der USB-Aufnahme .............. DE52
SD/USB-Medien/Heimnetzwerk ................... DE55
Ändern Sie die Fotogröße ............................ DE56
USB-Gerätekompatibilität ............................ DE58
Kompatibilität mit Heimnetzwerkserver ........ DE58
Wählen der Bildgröße für den 
Videomodus .............................................. DE58
Anschließen eines PC
Anschließen eines PC ................................. DE59
Anzeigen eines PC-Bilds auf dem TV .......... DE59
PC-Steuerung des TV .................................. DE62
Netzwerk-Einstellungen
Anschließen an das Netzwerk ..................... DE64
Net TV
Was ist Net TV? ........................................... DE66
NETFLIX ...................................................... DE66
Bedienung von Net TV ................................. DE66
Betrachten von 3D-Bildern
Vor der Benutzung der 3D-Brille .................. DE67
Vorbereiten der 3D-Brille ............................. DE68
Benutzen der 3D-Brille ................................. DE69
Vorsichtsmaßregeln zum Betrachten von 
3D-Bildern ................................................. DE71
Anzeigeformat für 3D- und 2D-Bilder ........... DE72
Betrachten von 3D-Bildern ........................... DE73
Anpassen der TV-Einstellungen für 
verbesserte 3D-Bildbetrachtung ............... DE74
Technische Daten — 3D-Brille ..................... DE76
Fehlersuche — 3D-Bilder ............................ DE76
Anhang
Fehlersuche ................................................. DE77
Updaten des TV über DVB-T/T2/C/S/S2 ..... DE79
Abrufen von Update-Informationen .............. DE79
Informationen zur Software-Lizenz für dieses 
Produkt ..................................................... DE80
Deaktivierung von Netflix Funktion .............. DE80
Updaten des TV per USB/Netzwerk ............ DE80
Warenzeichen .............................................. DE81
Software-Lizenzen für Net TV ...................... DE82
Haftungsausschluss für Internetdienste ....... DE82
Technische Daten ........................................ DE83
Technische Daten (Wireless LAN) ............... DE84
Technische Daten (Bluetooth) ...................... DE84
Umweltrelevante technische Daten ............. DE85
Befestigen des TV an einer Wand ............... DE85
Spezifikationen für das Wandmontage-Kit ... DE86
Maßzeichnungen ......................................... DE88
EU-Energieeffizienzzeichen für 
Fernsehgeräte .......................................... DE90
Page of 56
Display

Click on the first or last page to see other LC-70UQ10KN (serv.man2) service manuals if exist.