Sharp LC-70UQ10KN (serv.man12) Service Manual / Technical Bulletin ▷ View online
LCD 2014 05 01
Date of Issue:
2
nd
May 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 4 of 8
Sharp Electronics (UK) Limited
Reference
– RG08072013-1
Revision - 3
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Performing a network
update…cont
6. The software update starts.
Note
– Do not disconnect the network server during this update.
7. When the update is complete the following screen appears.
The new software version will be shown on-screen.
LCD 2014 05 01
Date of Issue:
2
nd
May 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 5 of 8
Sharp Electronics (UK) Limited
Reference
– RG08072013-1
Revision - 3
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Performing a USB update
1. Download and extract the UVP file from the Technical Website.
2. Copy the UVP file onto the root of a USB memory stick.
3. Turn on the AC power.
4. Insert the USB memory stick into a USB socket on the unit.
5. Use the Menu button and cursor keys on the remote control or on the set and navigate to -
2. Copy the UVP file onto the root of a USB memory stick.
3. Turn on the AC power.
4. Insert the USB memory stick into a USB socket on the unit.
5. Use the Menu button and cursor keys on the remote control or on the set and navigate to -
Setup - Information - Software update - USB update on OSD menu.
6. If a software update file is detected on the USB memory stick, the following screen shows up:
NOTE: If there is no software update file in the USB memory stick, a caution shows up.
"Please insert the correct file and retry software update."
NOTE: If the software update file in the USB memory stick is incorrect, a caution shows up.
"Please insert the correct file and retry software update."
NOTE: If the software update file in the USB memory stick is already installed, a caution shows up.
"Please reconfirm the software version and reinstall (if necessary)."
7. The software update starts.
Note
Note
– Do not disconnect the USB memory stick during this update.
LCD 2014 05 01
Date of Issue:
2
nd
May 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 6 of 8
Sharp Electronics (UK) Limited
Reference
– RG08072013-1
Revision - 3
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
Performing a USB update
…cont
8. When the update is complete the following screen appears.
The new software version will be shown on-screen.
9. When the update is complete, follow the on-screen instructions and remove the USB
memory stick.
LCD 2014 05 01
Date of Issue:
2
nd
May 2013
Classification:
Yellow
LCD TELEVISION TECHNICAL BULLETIN
Page 7 of 8
Sharp Electronics (UK) Limited
Reference
– RG08072013-1
Revision - 3
White
– Carry out as required
Yellow
– Carry out as required and whenever the unit comes in for service
Red
– Carry out on all units
HDMI IC update
1. Ensure the unit is updated to firmware version 1.09.
2. Remove any connected HDMI cables from the unit.
3. Enter service mode (Details in the Service Manual on the Technical Website).
4.
2. Remove any connected HDMI cables from the unit.
3. Enter service mode (Details in the Service Manual on the Technical Website).
4.
Check the “HDCP FW Version” and confirm it is “2020” on page 1/30.
5. Navigate to page 5/30 and highli
ght “HDMI HDCP FW WRITE” and push the “OK” button on
the remote control.
6.
After approximately one minute, “HDMI HDCP FW WRITE” will show “OK”.
7. Disconnect / reconnect the unit from the mains power.
8. Enter service mode.
8. Enter service mode.
Display