Sharp LC-70UD20KN (serv.man5) User Manual / Operation Manual ▷ View online
83
Environmental specifications
Item
60
o
70
o
I On-mode (W) (in home-mode)
173 W
184 W
J Energy-Save-Mode (W)
Advanced
125 W
134 W
K Standby-Mode (W)
0.18 W
0.18 W
L Annual Energy Consumption (kWh)
240 kWh
255 kWh
L
Annual Energy Consumption
Energy-Save-Mode (kWh)
Energy-Save-Mode (kWh)
Advanced
173 kWh
186 kWh
5
Energy Classification
B
A
I
Measured according to EN 62087:2009
J
For further information about the Energy Save function, please see related pages in
this operation manual
this operation manual
K
Measured according to EN 50564:2011
Standby power consumption applies when the TV is set to not receive EPG data
Standby power consumption applies when the TV is set to not receive EPG data
L
Annual energy consumption is calculated according to EU Regulation (EU)
No 1062/2010 based on operating 4 hours per day for 365 days a year
No 1062/2010 based on operating 4 hours per day for 365 days a year
NOTE
• The power consumption of on-mode varies depending on the images the TV displays.
Mounting the TV on a wall
• This TV should be mounted on a wall only with a SHARP wall mount bracket.
The use of other wall mount brackets may result in an unstable installation and may
cause serious injuries.
cause serious injuries.
The listed optional accessory is available for this LCD colour TV. Please purchase them at your
nearest shop.
• Mounting the LCD colour TV requires special skills and should only be performed
by qualified service personnel. Customers should not attempt to do the work
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the
TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
NOTE
• Detach the cable tie on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4
locations on the rear of the TV, and then use the screws supplied with the wall mount
bracket to secure the bracket to the rear of the TV.
bracket to secure the bracket to the rear of the TV.
E
Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
one by setting this function to “Yes”.
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
Appendix
No.
Part name
Part
number
Notes
1
Wall mount bracket
AN-52AG4
The mark “c” indicates the location of
the centre of the TV screen
the centre of the TV screen
.
84
Rating table for child lock
User-adjusted
rating
Broadcasted rating
AGE
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Universal
viewing
✔
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Parental
approval pref.
✔
✔
✔
✔
✔
—
—
—
—
—
—
—
—
—
—
X-rated
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
User-adjusted
rating
Broadcasted rating
Universal viewing
Parental approval
pref.
X-rated
Universal
viewing
—
—
—
Parental
approval pref.
✔
—
—
X-rated
✔
✔
—
Abbreviation list
Abbreviated term
Stands for
ARC
Audio Return Channel
ATV
Analogue TV
CEC
Consumer Electronics Control
DivX®
Digital Video Xtreme®
:
Digital Noise Reduction
DTV
Digital TV
DVB-C
Digital Video Broadcasting-Cable
DVB-S
Digital Video Broadcasting-Satellite
DVB-S2
Digital Video Broadcasting-Satellite-Second Generation
DVB-T
Digital Video Broadcasting-Terrestrial
DVB-T2
Digital Video Broadcasting-Terrestrial Version 2
DVI
Digital Visual Interface
EPG
Electronic Programme Guide
HbbTV
Hybrit Broadcast Broadband TV
HDCP
High-bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
LAN
Local Area Network
MHEG
Multimedia and Hypermedia Expert Group
MHL
Mobile High-Definition Link
OSD
On Screen Display
PCM
Pulse Code Modulation
SAT
Satellite
USB
Universal Serial Bus
WPS
Wi-Fi® Protected Setup
Appendix
85
Appendix
Dimensional drawings
I
Active area
J
Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
LC-60UD20E
LC-60UD20EN
LC-60UD20KN
LC-60UD20EN
LC-60UD20KN
LC-70UD20E
LC-70UD20EN
LC-70UD20KN
LC-70UD20EN
LC-70UD20KN
86
Appendix
EU Energy Label for Televisions
On 30 November, 2010 the European Commission adopted the Commission
Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of
televisions.
Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of
televisions.
The Regulation entered into force on 20 December 2010 and applies in all
Member States.
Manufacturers and dealers are required to display the label, on their televisions
from 30 November 2011.
Member States.
Manufacturers and dealers are required to display the label, on their televisions
from 30 November 2011.
The label provides information to assist consumers in evaluating televisions for
energy efficiency and energy consumption and to make a purchasing decision
that contributes to the protection of the environment and to a lower carbon
society.
energy efficiency and energy consumption and to make a purchasing decision
that contributes to the protection of the environment and to a lower carbon
society.
The figure below shows the advanced label design and explains the information
included. For further information please visit the Sharp internet homepage
(http://www.sharp.eu).
included. For further information please visit the Sharp internet homepage
(http://www.sharp.eu).
The retailer or online shop where you purchased your television from would have
displayed the label and its corresponding rating. If in doubt please consult them.
displayed the label and its corresponding rating. If in doubt please consult them.
XYZ
XYZ
XYZ
XYZ
1
2
3
4
5
6
7
8
9
X
NOTE
• Methods for calculating the Energy Efficiency Index and the annual on-mode energy
consumption are set out in Annex II of Regulation (EU) No 1062/2010. The determination
of the on-mode consumption is based on the international standard EN 62087:2012.
of the on-mode consumption is based on the international standard EN 62087:2012.
Click on the first or last page to see other LC-70UD20KN (serv.man5) service manuals if exist.