Sharp LC-70LE747KN (serv.man2) User Manual / Operation Manual ▷ View online
79
Appendix
Reset the PIN
1
Go to “TV Menu” > “Setup”.
2
Press
a/b to select “Auto installation”, “Programme setup”, “PIN”,
“Parental rating” or “Reset”, and then press
;. The PIN input window will
display.
3
Press and hold both :r and i+ on the TV simultaneously until the
message appears on the screen.
message appears on the screen.
NOTE
• When the PIN code is reset, the default PIN code (“1234”) is set.
• The PIN is also available for the Net TV function.
• The PIN is also available for the Net TV function.
Reset
If complex adjustments are made so that the settings cannot be restored to
normal, you can reset the settings to the factory preset values.
normal, you can reset the settings to the factory preset values.
1
Go to “TV Menu” > “Setup” > “View setting” > “Reset”.
2
Press
c/d to select “Yes”, and then press ;.
• “Now, TV will restart automatically, OK?” displays on the screen.
3
Press
c/d to select “Yes”, and then press ;.
• “Now initialising...” displays on the screen and blinks.
• After the reset has completed, the power shuts off and then comes back on. The
• After the reset has completed, the power shuts off and then comes back on. The
screen will have returned to its original settings.
NOTE
• PIN input is required when executing “Reset”. The default PIN is “1234”. To change the
PIN setting, refer to Individual setting — PIN (Page 44). To reset the PIN setting (PIN
input will no longer be needed), refer to Reset the PIN shown above.
input will no longer be needed), refer to Reset the PIN shown above.
• “Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D
mode.
80
Updating your TV via DVB-T/T2/
C/S/S2
C/S/S2
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated
TV base software and DVB software available.
date. From time to time SHARP will make updated
TV base software and DVB software available.
View setting
Download setup
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” >
“Download setup”.
“Individual setting” > “Standby search” >
“Download setup”.
Searching for updates*
* All countries except UK, Sweden, Finland and Italy are
set to “No” for this function.
The TV automatically determines whether a new
software version is available when the TV is in
standby mode.
software version is available when the TV is in
standby mode.
Item
Yes
Automatically searches for new
software updates available when the
TV is in standby mode.
software updates available when the
TV is in standby mode.
No
Does not search for update
information.
information.
Now
Checks if there is new software
immediately.
immediately.
Downloading the software
You can select the method of update.
1
If the software is updated, the confirmation
message “New download information has been
detected.” appears.*
message “New download information has been
detected.” appears.*
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
after turning on the power.
*
When the download is available only at a later time,
a confirmation message regarding the scheduled
date and time to start downloading from a TV
station will be displayed. Download information
may be displayed together with the confirmation
message.
a confirmation message regarding the scheduled
date and time to start downloading from a TV
station will be displayed. Download information
may be displayed together with the confirmation
message.
2
Follow the screen prompts.
Item
Yes
Starts downloading immediately.*
It takes approximately one hour to
update. You cannot carry out other
operations while downloading.
• Cancels the download by pressing
It takes approximately one hour to
update. You cannot carry out other
operations while downloading.
• Cancels the download by pressing
; on the remote control unit when
“Discontinue” is displayed on the
screen during the update.
“Discontinue” is displayed on the
screen during the update.
No
Does not perform downloading.
* The download will start at the date and time for the
scheduled download. Turn on the power of the TV
before the scheduled time for downloading or keep it in
standby mode.
before the scheduled time for downloading or keep it in
standby mode.
NOTE
• Do not unplug the AC cord while receiving the data,
otherwise it will not be captured properly.
• Updating the software may take some time.
Getting update information
Information
Picture / Audio test
When external equipment is connected with the
TV powered on and there is no audio/video output,
the TV may determine which equipment could
cause a problem between the TV and the external
equipment.
TV powered on and there is no audio/video output,
the TV may determine which equipment could
cause a problem between the TV and the external
equipment.
NOTE
• Terminals which can be tested:
HDMI, component, composite, SCART, DVI, D-sub
• External speakers cannot be tested. This function is
available for the TV speakers only.
Item
Picture test
Perform a test for picture display.
When external equipment is connected
but the picture is not displayed, the
test will be performed.
When external equipment is connected
but the picture is not displayed, the
test will be performed.
Audio test
Perform a test for audio playback.
When external equipment is connected
but the audio does not playback, the
test will be performed.
When external equipment is connected
but the audio does not playback, the
test will be performed.
Information
Message list
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
update information and download the software from
“Message list”.
Go to “TV Menu” > “Setup” > “Information” >
“Message list”.
“Message list”.
NOTE
• When the TV succeeds at downloading new software,
the message is updated in the “Message list” of the
“Information” menu.
“Information” menu.
• The software update will not be carried out if there is no
new software available at the specified download time.
Appendix
81
Information
Receiver report
Display reports regarding failures and changes for
timer settings.
timer settings.
Go to “TV Menu” > “Setup” > “Information” >
“Receiver report”.
“Receiver report”.
Information
Identification
You can check the TV ID on the screen for reporting
to customer service.
to customer service.
Go to “TV Menu” > “Setup” > “Information” >
“Identification”.
“Identification”.
Information on the software licence
for this product
for this product
Information
Software licence
You can read the software licences in this menu.
Go to “TV Menu” > “Setup” > “Information” >
“Software licence”.
“Software licence”.
E
Software composition
The software included in this product is comprised
of various software components whose individual
copyrights are held by SHARP or by third parties.
of various software components whose individual
copyrights are held by SHARP or by third parties.
Deactivating Netflix function
Information
Netflix help
When you deactivate Netflix, refer to following
process.
process.
1
Go to “TV Menu” > “Setup” > “Information” >
“Netflix help”.
“Netflix help”.
2
Press
c/d to select “Deactivate”, and then
press OK.
3
Press
c/d to select “Yes”, and then press OK.
Updating your TV via USB/network
Information
Software update
This function allows you to update to the latest
software via a USB device or network.
software via a USB device or network.
• To check the availability of the latest software versions,
visit http://www.sharp.eu/software-download/ for links
to the download pages for the appropriate countries.
to the download pages for the appropriate countries.
1
Go to “TV Menu” > “Setup” > “Information” >
“Software update” > “USB update”.
“Software update” > “USB update”.
• You can also update the software through the
network. Go to “TV Menu” > “Setup” >
“Information” > “Software update” > “Network
update” and follow the on-screen instruction.
“Information” > “Software update” > “Network
update” and follow the on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet
(Pages 64–65).
(Pages 64–65).
2
Press
; and then insert the USB device
containing the software update file.
CAUTION
• Be sure to insert the USB device correctly into the
terminal.
3
Press
> to close the window when a screen
prompt pops up.
4
The TV displays a confirmation screen while
checking the data in the inserted USB device.
checking the data in the inserted USB device.
CAUTION
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3
after pressing
after pressing
;.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update
• The USB memory has two or more software update
files.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your
• The software update file is not compatible with your
TV’s software.
• The current system is same as the system update
data.
• The USB memory is not formatted by FAT32.
5
The TV displays the software version information
after checking the data.
after checking the data.
6
Press
c/d to select “Yes” to update the
system, and then press
;.
7
The TV restarts automatically, and the software
update will be complete.
update will be complete.
• This operation may take a while.
CAUTION
• The Net TV memory, which includes the lock code,
passwords, and cookies, may be cleared when the
software update is carried out.
software update is carried out.
Appendix
82
Warning regarding basic use
Cautions regarding use in high and low temperature environments
• When the TV is used in a low temperature space (e.g., room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the TV will
recover when the temperature returns to normal.
recover when the temperature returns to normal.
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the LCD panel to malfunction.
Storage temperature:
and the LCD panel to malfunction.
Storage temperature:
f 20 °C to e 60 °C.
Devices connected to the protective earthing of the building installation through the
MAINS connection or through other devices with a connection to protective earthing
and to a television distribution system using coaxial cable, may in some circumstances
create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
MAINS connection or through other devices with a connection to protective earthing
and to a television distribution system using coaxial cable, may in some circumstances
create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also
relevant for devices that can be connected to television distribution systems.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
and other countries.
• Manufactured under license from Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—
project.
• LC
_ LCFONT+ and LC logo mark are registered trademarks of
SHARP Corporation. This product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen
pages.
developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen
pages.
• DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX videos.
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
• YouTube and the YouTube logo are trademarks of Google Inc.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
• All other company or product names are trademarks or registered trademarks of their
respective companies.
• MHL, the MHL Logo, and Mobile High-Definition Link are trademark or registered
trademarks of MHL LLC in the United States and other countries.
• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• Full HD 3D Glasses™ logo and “Full HD 3D Glasses™” word are trademark of Full
HD 3D Glasses Initiative
• Netflix and the Netflix logo are the registered trademarks of Netflix, Inc.
Appendix
http://www.espial.com
Click on the first or last page to see other LC-70LE747KN (serv.man2) service manuals if exist.