Sharp LC-70LE741E (serv.man15) User Manual / Operation Manual ▷ View online
35
View settings
Go to “HOME” > “TV Menu” > “Setup” >
“View setting”.
Setup
Quick start
Auto installation
View setting
Channel settings
CH list
:Back
:Enter
Menu
Individual setting
View setting
Auto installation
The TV automatically detects and stores all available
services in your area. This function also allows you
to perform the channel setting for digital, satellite
and analogue individually and reconfigure the
settings after the initial auto installation has been
completed.
1
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Auto installation”.
2
Press c/d to select “Yes”, and then press ;.
3
Press a/b/c/d to select the desired
language, and then press ;.
NOTE
• PIN input is required when executing “Auto installation”.
The default PIN is “1234”. To change the PIN setting,
refer to Individual setting — PIN (Page 38). To reset the
PIN setting (PIN input will no longer be needed), refer to
Reset the PIN
Reset the PIN
(Page 67).
• You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If
you want to reconfigure those settings, automatically
execute initial auto installation after executing “Reset”
from the “Setup” menu.
• The current country setting is displayed on the screen.
4
Press a/b to select the broadcast standard
you want to search, and then press ;.
E
Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting
broadcast setting
on page 15.
E
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting
broadcast setting
on page 15.
E
Satellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer to
the “Satellite search” setting on page 16.
Important information:
Satellite services are only available for the 740 model
series.
NOTE
• After selecting “Next” in the DVB-S/S2 setting screen,
you need to select your preferred satellite broadcast to
start searching.
View setting
Programme setup
You can reconfigure the DTV service settings
automatically or manually.
1
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Channel settings” > “Programme
setup”.
2
Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
• PIN input is required when executing “Programme
setup”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 38).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 67).
Digital setting
Terrestrial
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or
the “Auto installation” menu.
E
Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation” menu
has been completed.
E
Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
• You can perform “Manual search” with a service number
only when the five Nordic countries have been selected
in the country setting.
E
Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Service
no.
Lock
Service
name
Lock
CH skip
Old LCN
CH skip
Sort
Delete
1
Press a/b to select the desired service.
2
Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Basic adjustment
36
Buttons for “Manual adjust” operation
Lock
Press R button.
When the service is locked, you must enter your
PIN whenever you tune to the service.
CH skip
Press G button.
Services with a ✔ mark are passed over when
pressing :r/s on the TV or remote control
unit.
Delete
Press Y button.
The selected service is deleted. If you want
to watch the service you deleted once again,
perform “Auto installation”, “Additional search”,
or “Manual search”.
Sort
Press B button.
The item position of services can be sorted.
1
Press a/b to select the service whose
item position you want to move, and then
press ;.
2
Press a/b to move it to the desired
position, and then press ;.
3
Repeat steps 1 and 2 until all desired
service items are sorted.
Cable
You can reconfigure the following settings when you
select “Cable” in the initial auto installation or the
“Auto installation” menu.
E
Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation”
menu has been completed. Follow steps 1 to 5 in
Searching for cable broadcasts
Searching for cable broadcasts
on page 15.
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen, the
TV starts searching.
• Refer to the table about menu items in the centre
column on page 15.
Frequency
Symbol rate
QAM modulation
Search start
MHz
E
Manual adjust
This function is the same as in “Terrestrial”. Refer to
“Manual adjust” in “Terrestrial”.
NOTE
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
Satellite setting (740 series only)
Before selecting the type of search in “Satellite
setting”, you need to select the satellite broadcast.
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
E
Additional search
Use this menu to add new services automatically
after auto installation has been completed. Follow
steps 1 to 2 in the right column on page 16.
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen,
select “Yes” from “Search start” menu.
Band
[Vert/Low]
Frequency
Symbol rate
Search start
Symbol rate
Search start
Vert/High
Horiz/Low
Horiz/High
Vert/Low
E
Manual adjust
This function is the same as in “Digital setting”.
Refer to “Manual adjust” in “Digital setting”.
Basic adjustment
37
Analogue setting
You can reconfigure the analogue TV channels
settings automatically or manually.
E
Additional search
Use this menu to add new services automatically
after “Analogue search” in the “Auto installation”
menu has been completed.
• Start searching channels after selecting the colour
system and sound system.
E
Manual adjust
Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• You can set by directly entering the frequency number
of the channel with 0_9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive
(“Auto”, “PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
Select each character of the new name for the
channel with using the software keyboard (Page 13).
NOTE
• The name can be five characters or less.
Skip
Channels with “Skip” set to “On” are passed over
when using :r/s even if selected while watching
the image from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock
has been activated” displays, and the image and sound
of the channel are blocked.
• When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting
the correct PIN unlocks the “PIN” temporarily until the
power is turned off.
E
Sort
Channel positions can be sorted freely.
1
Press c/d to select “Yes”, and then press ;.
2
Press a/b/c/d to select the channel you
want to move, and then press ;.
3
Press a/b/c/d to move it to the desired
position, and then press ;.
4
Repeat steps 2 and 3 until all desired channels
are sorted.
E
Erase programme
Channels can be erased individually.
1
Press c/d to select “Yes”, and then press ;.
2
Press a/b/c/d to select the channel you
want to erase, and then press ;.
• A message window pops up.
3
Press c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
4
Repeat steps 2 and 3 until all desired channels
are erased.
Basic adjustment
38
TV start-up time setting
View setting
Quick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Quick start”.
Item
On
The TV quickly starts up from standby.
Around 15 W or more of power
consumption is required during
standby.
Auto (Time shift)
The “Quick start” mode will automatically
turn on and off depending on the time
shift status. If playable data exists on the
USB storage device registered for time
shift, “Quick start” will be automatically
set to the same status as “On”.
Off
Power consumption is small during
standby.
NOTE
• You cannot select “Off” in the “Quick start” menu while
time shift is activated. Follow the on-screen instructions
to change the “Quick start” settings.
• If you want to clear the playable data, go to “HOME” >
“TV Menu” > “Setup” > “View setting” > “Time shift
setting” > “Clear the Time shift memory” (Page 47).
Individual setting — PIN
View setting
PIN
Allows you to use a PIN to protect certain settings
from being accidentally changed.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “PIN”.
NOTE
• PIN input is required when executing “PIN”. The default
PIN is “1234”. To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 67).
E
When selecting “Yes”
Register a four-digit number to use the “PIN”
function.
1
Press c/d to select “Yes”, and then press ;.
2
Enter the four-digit number as a PIN using 0_9
numeric buttons.
3
Enter the same four-digit number as in step 2 to
confirm.
• “The system PIN has been changed successfully”
displays.
4
Press ;.
NOTE
• As a precautionary measure, make a note of your
PIN and keep it in a safe place that children cannot
reach.
reach.
• “0000” cannot be set as the PIN code.
• To view a locked channel, you must enter the PIN (see
pages 36 and 37 for locking channels from viewing in DTV,
SAT and ATV mode). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the
PIN input window.
View setting
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
1
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Parental rating”.
2
Repeat steps 1 to 4 in when selecting “Yes” to
the left.
NOTE
• “Universal viewing” and “Parental approval pref.” are
ratings used exclusively in France.
• Refer to page 75 for details about ratings.
Individual setting — Clock
View setting
Clock setup
You can adjust the time manually and change the
clock display.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Clock setup”.
Time adjustment
This function allows you to set the clock manually.
NOTE
• If you select “No”, the TV will try to get the time for the
broadcast.
Time display
This function allows you to display the clock time in
the lower-right corner of the screen.
Item
On
Displays the clock time.
On (half-hourly)
Displays the clock time in
30-minute increments.
Off
Hides the clock time.
Time format
You can select the time format (either “24HR” or
“AM/PM”) for the clock time.
Basic adjustment
Click on the first or last page to see other LC-70LE741E (serv.man15) service manuals if exist.