Sharp LC-60LE751EK (serv.man3) Service Manual ▷ View online
21
LC-60LE751
LC-60LE752
Quick guide
1 Select
satellite.
Press
J
to continue.
2 Specify here the oscillator frequency for your LNB.
If your set is connected to a single-cable system
without external voltage supply, you can connect
the antenna supply (13V or 18V / max. 450mA)
with 13V or 18V.
the antenna supply (13V or 18V / max. 450mA)
with 13V or 18V.
Continue with Setting options for DVB-S reception
below.
below.
Ɣ
Network selection
If several networks are available via DVB-S, you
can decide which network you want to receive your
channels from.
can decide which network you want to receive your
channels from.
Ɣ
Settings
If several satellites are received, the following settings
must be made for every satellite. The type of settings
available may differ depending on the selected satellite
or network.
must be made for every satellite. The type of settings
available may differ depending on the selected satellite
or network.
Setting options for DVB-S reception
Ɣ
Scrambled stations
Select yes to save all scrambled stations.
• These stations can only be received in connection
• These stations can only be received in connection
with a CI module and the appropriate CA Card.
• If a CI module with a CA Card is already inserted
for the station search, all the stations which this
module can descramble are also saved when no
is selected.
module can descramble are also saved when no
is selected.
Ɣ
Search method
If you select Frequency Search here, a search is
performed for all receivable stations. With Network
Search, from all receivable networks all the stations are
searched which are supplied by these networks.
performed for all receivable stations. With Network
Search, from all receivable networks all the stations are
searched which are supplied by these networks.
Ɣ
Symbol rate
The symbol rate is specified by the satellite provider and
normally does not need to be changed.
normally does not need to be changed.
Ɣ
Accept Logical Channel Number
This setting allows you to decide whether you want to
accept the Logical Channel Number (LCN).
Press
accept the Logical Channel Number (LCN).
Press
J
to continue.
Continue with Setting options for all types of
reception below.
reception below.
Ɣ
Age related lock
Allows you to restrict programmes depending on the age
classification.
classification.
The information about age classification is provided by
the broadcasting station.
The stations locked can only be watched after entering
the access code (see page 24).
the broadcasting station.
The stations locked can only be watched after entering
the access code (see page 24).
Ɣ
Time and date
Enter the correct values with the numeric buttons here.
Ɣ
Ɣ
Network configuration
Here you can now specify if you wish to configure a
network "Configure now" (see page 47) or you wish
to configure it later "Do not configure or configure
later".
network "Configure now" (see page 47) or you wish
to configure it later "Do not configure or configure
later".
Setting options for Other communal installation
Setting options for all types of reception
Operation Manual (Continued)
22
LC-60LE751
LC-60LE752
Quick guide
If you install a DVB-T/T2/S/S2 antenna for the first time
or relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
or relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
In normal TV mode, without other displays, a DVB-T
station is received and selected.
station is received and selected.
1 Select
Setup.
2 Select
Stations.
3
Select Manual Scan TV.
Position and align the antenna in such a manner that
maximum values for C/N and Level are obtained.
The value for BER should be as low as possible.
maximum values for C/N and Level are obtained.
The value for BER should be as low as possible.
4
Select Search and press OK to start search.
Positioning / aligning DVB-T
antenna
Operation Manual (Continued)
23
LC-60LE751
LC-60LE752
DIMENSIONS
39”: ( )
50”: [ ]
60”: [( )]
50”: [ ]
60”: [( )]
(881) / [1123] / [(1368)]
(517) / [654] / [(798)]
(580) / [718] / [(847)]
(859) / [1100] / [(1335)]
(483) / [620] / [(754)]
(470) / [470] / [(584)]
(322) / [396] / [(454)]
(63) / [64] / [(49)]
(253) / [301] / [(351)]
(91)
[110]
[(132)]
(41)
[41]
[(41)]
(200) / [400] / [(400)]
(200) / [200] / [(400)]
(183) / [206] / [(230)]
24
LC-60LE751
LC-60LE752
REMOVING OF MAJOR PARTS
1. Removing of major Parts 60”
1.1. Remove the 4 lock screws
and detach the Stand.
1.2. Remove the 19 lock screws
, 1 lock screw , 1 lock screw , 2 locks screws and detach the AC cord cover
and Rear Cabinet.
STAND
2
front
CABINET
rear
CABINET
1
3
4
5
STAND
1.3.
Disconnect all the connectors from all the PWBs.
Main unit
[LV]
[PD]
[SP]
[LW]
[LV]
AC CORD
[PD]
[EL]
[LA]
Power unit
P802
P801
SC101
[LW]
[RA]
SPEAKER -R
SPEAKER -L
Click on the first or last page to see other LC-60LE751EK (serv.man3) service manuals if exist.