Sharp LC-60LE636E Service Manual ▷ View online
LC-60LE635E(B),RU(B)/636E(B),S(B)/638E(B)
4 – 7
[2] The location putting on the heat measure sheet
1. MAIN PWB Unit
PSPAZC805WJKZ
LC-60LE635E(B),RU(B)/636E(B),S(B)/638E(B)
4 – 8
2. LCD Control Unit
PSPAZC805WJKZ
LC-60LE635E(B),RU(B)/636E(B),S(B)/638E(B)
4 – 9
[3] Precautions for assembly
1. Points to be checked and precautions when servicing the unit
Mount the main PWB Ass’y on the backlight chassis and check that the EMI-prevention parts are not peeled and twisted from the access holes. (The
EMI-prevention parts, conductive nonwoven fabric gaskets, must be seen from the access holes.)
[Countermeasure]
Attach the conductive nonwoven fabric gaskets on the shielded case on the main PWB.
[Countermeasure]
Attach the conductive nonwoven fabric gaskets on the shielded case on the main PWB.
PSPAZC691WJZZ
PSPAZC690WJZZ
PMLT-A676WJZZ
PSPAZC691WJZZ
LC-60LE635E(B),RU(B)/636E(B),S(B)/638E(B)
4 – 10
State where the main PWB and shielded case are assembled
The following is a drawing mounting the main PWB Ass’y on the backlight chassis. (The parts indicated by -> are the access holes for confirmation.)
(Main PWB Ass’y => State where the shielded case and RF terminal angle are mounted on the main PWB)
(Main PWB Ass’y => State where the shielded case and RF terminal angle are mounted on the main PWB)
Access hole
Access hole
Click on the first or last page to see other LC-60LE636E service manuals if exist.