DOWNLOAD Sharp LC-60LE636E (serv.man8) Service Manual ↓ Size: 565.05 KB | Pages: 10 in PDF or view online for FREE

LC-60LE635E/636E/638E (1st Edition)

6 – 5

                                             
Is the LVDS signal output from IC3303 (DIGITAL_AV_DECODER_&_MAIN_CPU) respectively?
[VBO_HTPDN(C21),  VBO_LOCKN(D21), VBO_TXA+-(A22/B22), VBO_TXB+-(A23/B23),  VBO_TXC+-(A24/B24),  VBO_TXD+-(A25/B25)

  

YES

NO

Check IC3303 and its peripheral control circuits.
(IC2001, IC3501, IC3502, X3301, etc.)

Do above-mentioned LVDS signals output from connector 
(P2604)?

NO

Check the line between IC3303 and P2604.

  

YES

Similarly, is LCD controller's control signal normal?

NO

Please check each control signal of DET_POW (DET_PNL12V), 
PE (PNL_EN).

YES

LCD Controller Unit: 
Do LVDS signals input to connector (LW) of LCD Controller Unit?

NO

 Wire harness (LW) is checked.

YES

Check the panel module.

In the case of LE635E/636E series, refer to (A).
In the case of LE638E series, refer to (B).

(B)

(A)

Does video signal (IFTU_AIF+/CVBS) output from pin [9] 
of TUNER (TU1102)?

NO

Check the tuner and its peripheral circuits.
Replace as required.

YES

Does video signal (TUNER_CVBS) input to pin [AK24/
CPU_CVBS0P] of IC3303 (Digital AV decode & Main 
CPU)?

NO

Check the line between TU1102 and IC3303. (Q1106, etc...)

YES

Refer to “No picture on the display (1)”.

Does video signal (IFTU_AIF+/CVBS) output from pin [9] of 
TUNER (TU1104)?

NO

Check the tuner and its peripheral circuits.
Replace as required.

YES

Does video signal (TUNER_CVBS) input to pin [AK24/
CPU_CVBS0P] of IC3303 (Digital AV decode & Main CPU)?

NO

Check the line between TU1104 and IC3303. (Q1106, etc...)

YES

Refer to “No picture on the display (1)”.

LC-60LE635E/636E/638E (1st Edition)

6 – 6

                                            
Does CVBS signal output from pin [19] of EXT1 (SC505)?

YES

Check the setting of an external input device that connects with 
EXT1.

NO

Does CVBS signal output from pin [5] of IC510?
(CAPLESS VIDEO AMP with LPF)

YES

Check the line between SC505 and IC510.

NO

Does CVBS signal input to pin [3] of IC510?

YES

Check the peripheral circuits of IC510.

NO

Does CVBS signal output from pin [2] of IC507?

YES

Check the line between IC507 and IC510.

NO

Is CVBS_OUT_MUTE [pin (1)] of IC507 at “L”?

YES

Check the line between IC3303 and IC507.
Check the peripheral circuits of IC3303.

NO

Does CVBS signal input to pin [6] of IC507?

YES

Check the peripheral circuits of IC507.

NO

In the case of LE635E/636E series, refer to (A)?
In the case of LE638E series, refer to (B)?

(A)

(B)

Check the line between IC507 and TUNER (TU1102). 
(Q1106 etc...)

Check the line between IC507 and TUNER (TU1104).
(Q1106 etc...)

LC-60LE635E/636E/638E (1st Edition)

6 – 7

• Refer to Table 1.

• LED that can be used are only one of the central icon (Emblem Unit). 

This expresses the error situation by combining blinking at low speed and blinking at high speed.

• For this model, the blinking pattern displayed first is only a low-speed blinking.

This expresses a rough content of the error.

• For this model, details are displayed by a high-speed blinking by pushing remote control MENU key.

This expresses details of the error.

Details are distinguished by the blinking frequency.

• It doesn’t return to the outline display again (blink at low speed) by pushing the MENU key (The toggle is not done).

Please confirm “MONITOR ERR CAUSE” of the adjustment Process mode (1/20 page), when the error doesn't reproduce by having returned from
the error. 

• The process of the upgrade is expressed by the brightness of point LED that smoothness changes. 

• The upgrade completion is expressed by the LED brightness that changes in a staircase pattern. 

Central icons

By pushing remote control MENU key.

400ms

400ms

1600ms

OFF

ON

Central icons

1600ms

300ms

100ms

400ms

400ms

1600ms

OFF

ON

Central icons

500ms

500ms

OFF

ON

Central icons

1000ms

1000ms

1000ms

1000ms

OFF

ON

LC-60LE635E/636E/638E (1st Edition)

6 – 8

*2: It depends on the system. The power supply error suitable for the product is defined.

*3: For details, refer to ERROR STANDBY CAUSE on the adjustment process screen.

*4: If the boot section is abnormal, there is no flashing (flashing disabled).

Lamp system failure  Flashes once 

—

Flashes once 

Flashes once 

Lamp error

Power PWB failure

Flashes twice 

—

Flashes twice 

Flashes once 

Power Error 1 AC_DET error (*2) 

(Power failure, etc.)

Flashes twice 

Power Error 2 UR+13.5V error (*2) 

Flashes 3 times 

Power Error 3 D3.3V error (*2) 

Flashes 5 times 

Panel power supply error

Main PWB failure 

Flashes 3 times 

—

Flashes 3 times 

Flashes once 

Initial communication error

(Communication Flashes 

twice 

Start-up confirmation communication error

failure, etc.) 

Flashes 3 times 

Regular communication error

Flashes 5 times 

Other communication error

Others 

Flashes 4 times 

—

Flashes 4 times 

Flashes once 

Temperature error

Flashes twice 

Sync error

Flashes 3 times 

Notification from the main microprocessor 
(*3)

Upgrade executing 

smoothness 

changes. 

—

—

—

Version upgrading

Upgrade completion

a staircase 

pattern. 

—

—

—

Version upgrade succeeded

Upgrade failed 

—

Flashing

(Continuous)

—

—

Version upgrade failed

ROM data failure 

—

Flashing

(Continuous)

—

—

Start-up after failing version upgrade (*4)

Outline: Communication/Power failure detected by the monitor microprocessor (IC2001) is stored on EEPROM, states can be confirmed in the 

adjustment process mode.

Location: Page (1/20) of the adjustment process mode: MONITOR ERR CAUSE “0” if there is no error. It is cleared to 0 on the page (2/20) of the 

adjustment process mode.

02

Start-up communication error 2 

Initial communication from the main CPU is not received.

03

Start-up communication error 3 

Only the initial communication is received.

04

Start-up communication error 4

Until panel information request reception

05

Start-up communication error 5

Until initialization completion reception

06

Start-up communication error 6

Until version notification transmission

07

Start-up communication error 7

Until start-up information notification transmission

08

Start-up communication error 8

Until start-up information response reception

09

Start-up communication error 9

Until time-out setting reception

0A

Communication error A 

REQ time-out

0B

Communication error B 

Restart time-out during the beginning of time acquisition start-up

0C

Communication error C 

Ending sequence time-out

0D

Communication error D 

Preset start-up time-out during completion

0E

Communication error E 

Download start-up time-out

0F

Communication error F 

Time acquisition time-out

11

 Communication error H

Regular communication time-out

16

Panel-related error 

Lamp failure

1A

Other error 2 

Monitor temperature failure

1D

Power supply error 1 

PS_ON (AC_DET) failure

1E

Power supply error 2 

D_POW (DET_13V) failure

1F

Power supply error 3 

D_POW (DET_D3V3) failure

21

Power supply error 5 

Panel power failure

23

Other error 3 

Error standby request from the main CPU