DOWNLOAD Sharp LC-60LE636E (serv.man7) Service Manual ↓ Size: 772.54 KB | Pages: 19 in PDF or view online for FREE

LC-60LE635E/636E/638E (1st Edition)

5 – 13

16)  Public mode setting [PUBLIC MODE]

1. Starting the Copy Mode

• There are two following ways to display the Copy Mode setting screen.

1)  Method of needing password

a) Turn off the power, and turn it on again, pressing the  “CHANNEL UP” and  “Volume UP”  keys of the main unit at the same time.

Please separate the finger from the power supply key when boot-up is confirmed with lighting of a central icon etc.

After a while, value of Enter password appears on the screen.

b) Display the Pass Word input screen.

Operation procedure

• The initial input position is the digit at the left end.

• For the numeric keys “0” to “9” of R/C, key input is accepted.

Input of the other keys is prohibited.

• Change “—” to “ ” by inputting the numeric key at the input position, and shift the input position rightward one digit.

• When three digits are completely input, the Pass Word is judged.

c) Check the Pass Word by inputting three digits.

If the Pass Word “3” “6” “9”, it shifts to the Copy Mode setting screen.

In another case, the screen is erased, and it operates in the ordinary mode.

2. Exiting the Copy Mode Setting screen

There is following way to exit the Copy Mode setting screen.

• Turn off the power. (Unplug the AC power cord from the outlet to forcibly turn off the power.)

3. Basic operation in the Copy Mode

Option

“OFF” or “ON” (loop enabled)

Default OFF
Function 

The item decide whether Public mode setting menu are enabled or disabled.
The same item as [PUBLIC MODE] in the adjustment process menu.
     OFF
     ON

: Public mode is not active.
: Public mode is active.

Remarks 

Each operation of the Public mode is impossible unless this item is set to ON.

CH (+/-) or Cursor ( /

)

Movement to the selected item.

Decision (ok)

Execution

Enter password

Enter password

Enter password

LC-60LE635E/636E/638E (1st Edition)

5 – 14

4. Restriction of Copy Mode

• USB thumb drive should be more than 1Mbyte.

• File system of USB thumb drive should be FAT (FAT32).

• More than one USB thumb drive shouldn't be connected to TV.

• All USB terminals can be valid, but more than one USB thumb drive shouldn't be connected to TV.

• If USB device is detected by TV, focus is not appropriated to items.

• In Copy mode (TV

→USB) and (USB→TV), following should be mutched.

   Vender Name (Fixed)

   Key Information (Fixed)

   USB Cline Version

   Inch Size

   Country setting (Factory initialization)

   Model Name

   Software Version

• In each TV, setup of Network and IP control should be set again.

NOTE: • It is unnecessary to execute “Initial Auto Instration” for Copy Mode.

(Obviously, setting the country is also unnecessary.)

• Copy Mode can’t start until the TV recognizes a USB device.

TV takes about 20 seconds to recognizes a USB device after boot-up.

5. Copy data

Copy data is as follows;

Size of Ch call
Card slot selection Setting
Alphabet sorts do/not
HOME/Store Setting
Public Setting
Sound multiplex information in each Ch
Administrative information for Time Shift

Vendor ID, Product ID, Serial ID for storage

Communication's information

IP address, Gateway, DNS address
Kinds of Security key encryption (WiFi)
Access point identifier (WiFi)
Key for access point

IP control setting information

Device name, Login ID, Password, Communication port

DTV service list

Number of all services
CH list
Number of broadcasting on each network

Last value

Last network information (DVB-T, DVB-S, DVB-C, ATV)
Last channel information
Volume, wide mode, and subtitle

Local Time Information

Information that corrects 

±X time against Universal Time

User Manu Data

User Menu Data don't have these information.

Temporary data

Message list, Reception report, EPG, Off timer, Off video, and Signal strength

Peculiarity data for TV

DRM information for DivX, Mac address, and Accumulated time information

Connected equipment information 

(But the recorder selection of the AQUOS LINK setting can be copied.)
physical address
Category of equipment
Maker Name
Connected model name

Data related to encrypted broadcasting (CI+)
Adjustment process mode Data

LC-60LE635E/636E/638E (1st Edition)

5 – 15

6. Operating 

1) Copy mode (TV

ψUSB))

Execute start in Copy Mode setting screen.

̪ If USB device is detected by TV,

focus is not appropriated to items.

[Wait

̖] is displayed while executing it.

When succeeding: Done is displayed.
When failing:

Failed is displayed.

̪ Key opration is not valid in coping.

After success of copy,
unplug the AC power cord from the outlet, please.

2) Copy mode (USB

ψTV))

Execute start in Copy Mode setting screen.

̪ If USB device is detected by TV,

focus is not appropriated to items.

[Wait

̖] is displayed while executing it.

When succeeding: Done is displayed
When failing:

Failed is displayed.

̪ Key opration is not valid in coping.

After success of copy,
unplug the AC power cord from the outlet, please.

Copy mode

Execcute

Success

Fail

Execcute

Success

Fail

LC-60LE635E/636E/638E (1st Edition)

5 – 16

The adjustment process mode menu is listed in Section 5.

Signal generator level adjustment check. (Adjustment to the specified level)

Enter the adjustment process mode according to Section 2.

* ATTENTION: Please execute [12.3. TUNER adjustment] afterwards if you adjust [12.2. PAL signal adjustment] after all adjustments are 

                      completed. 

• Composite signal PAL

: 0.7Vp-p 

± 0.02Vp-p (Pedestal to white level)

• 33K component signal (50 Hz)

: Y level 

: 0.7Vp-p 

± 0.02Vp-p (Pedestal to white level)

: PB, PR level

: 0.7Vp-p 

± 0.02Vp-p

• ANALOG PC (RGB) signal

: RGB level

: 0.7Vp-p 

± 0.02Vp-p

1

Setting

[Signal]
PAL
Full field colour bar 
composite signal

[Terminal]
EXT1 SCART Video (PAL) 
IN

• Feed the PAL full field colour bar signal (75% colour saturation) to EXT1 

SCART IN.

2

Auto adjustment 
performance

Adjustment process 
[PAL ADJ] page 4/20

Bring the cursor on [PAL ADJ] and press [OK].
[PAL ADJ OK] appears when finished.

1

Setting

[Signal]
PAL sprit field colour Bar
RF signal UV

[Terminal]
TUNER

• Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture 

level.

Signal level: 55 dB 

µV ± 1dB (75Ω LOAD)

2

Auto adjustment 
performance

Adjustment process 
[TUNER ADJ] page 3/24

Bring the cursor on [TUNER ADJ] and press [OK].
[TUNER ADJ OK] appears when finished.

1

Setting

[Signal]
SECAM
Full field colour Bar Signal

[Terminal]
EXT1 SCART IN

• Feed the SECAM full field colour bar signal (75% colour saturation) to EXT1 

SCART IN.

2

Auto adjustment 
performance

Adjustment process 
[SECAM ADJ] page 4/24

Bring the cursor on [SECAM ADJ] and press [OK].
[SECAM ADJ OK] appears when finished.

[VIDEO input signal]

100% white

Black

[E-12CH]

χ100% white

[VIDEO input signal]

100% white

Black