Sharp LC-52LE831E (serv.man13) User Manual / Operation Manual ▷ View online
23
Timer setup using EPG
You can switch to a programme at a set time.
1
Press EPG.
2
Press a/b/c/d to select the programme you
want to set, and then press ;.
Back to EPG
Watch
No
Programme info.
Next
3
Press c/d to select “Watch”, and then press
;.
• If you select “No”, the TV returns to the EPG screen.
4
Press c/d to select “Yes”, and then press ;.
• The selected TV programme is marked with an icon.
5
Press ; to select “Back”.
Cancelling the timer setup
1
Press EPG.
2
Press a/b/c/d to select the programme with
timer setup, and then press ;.
3
Press c/d to select “Cancel”, and then press
;.
4
Press c/d to select “Yes”, and then press ;.
E
Cancelling using B button on the
remote control unit
remote control unit
1
Press EPG.
2
Press B to display the timer setup list.
3
Press a/b to select the programme you want
to cancel timer setup, and then press ;.
4
Press c/d to select “Cancel”, and then press
;.
5
Press c/d to select “Yes”, and then press ;.
Teletext
What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Turning teletext on/off
1
Select a TV channel or external source providing
a teletext programme.
2
Press m to display the teletext.
• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
• The same message displays during other modes if
no teletext signal is available.
TELETEXT
TELETEXT
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 44).
• Teletext will not work in 3D mode.
Buttons for teletext operations
Buttons
Description
:r/s
Increase or decrease the page number.
Numeric
buttons 0_9
buttons 0_9
Directly select any page from 100 to
899 by using the 0_9 numeric buttons.
Colour
(R/G/Y/B)
(R/G/Y/B)
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
k (Reveal
hidden
teletext)
hidden
teletext)
Reveal or hide hidden information such
as an answer to a quiz.
3 (Freeze/
Hold)
Hold)
Stop updating teletext pages
automatically or release the hold mode.
[ (Subtitle
for teletext)
for teletext)
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
1 (Subpage)
Reveal or hide subpages.
• Move to the previous subpage (R).
• Move to the following subpage (G).
• These two buttons are shown on the
screen by the symbols “e” and “f”.
;
Display the top menu.
• The top menu will not be displayed
when the service does not support
top menus.
MHEG-5 application (UK only)
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
NOTE
• MHEG may not be displayed properly in 3D mode.
NOTE
(831 series only)
• You can view some MHEG-5 content even if you do not
perform “Network setup”. Futhermore, “Network setup”
allows you to view additional content such as interactive
content from “Menu” > “Setup” > “View setting” >
“Network setup”.
• You cannot view MHEG-5 content when MHEG-
5 content is not broadcast even if you perform the
appropriate “Network setup”. Carefully check the
broadcast programme.
Watching TV
24
Introduction to connections
The TV is equipped with the terminals as shown
below. Find the cable corresponding the TV’s
terminal and connect the device.
E
Before connecting ...
• Be sure to turn off the TV and any devices before
making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external
device for possible connection types. This also helps
you get the best possible audiovisual quality to
maximise the potential of the TV and the connected
device.
Connection method for other devices
w PC
Page 55
w USB device
Page 47
w Internet
Pages 60 and 61
Connecting external devices
Audio device
(Page 27)
Video recording device
(Pages 26–27)
Game console or
camcorder (Page 27)
HDMI-certified cable
HDMI-certified cable
DVI/HDMI cable
ø 3.5 mm stereo minijack cable
AV cable
Audio cable
Optical audio cable
SCART cable
Component cable
Audio cable
HDMI device
(Page 25)
or
25
Video connections
HDMI connection
Example of connectable devices
E
DVD player/recorder
E
Blu-ray player/recorder
E
Game console
The HDMI connections permit digital video and audio transmission via a connection
cable from a player/recorder. The digital picture and sound data are transmitted
without data compression and therefore lose none of their quality. Analogue/digital
conversion is no longer necessary in the connected devices, which also would
result in quality losses.
n
o
p
ø 3.5 mm stereo minijack cable (commercially available)
DVI/HDMI cable (commercially available)
HDMI-certified cable (commercially available)
DVI/HDMI conversion
Using a DVI/HDMI cable, the digital video signals of a DVD can also be played
via the compatible HDMI connection. The sound must be fed in additionally.
• When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in
clearly.
• Both HDMI and DVI use the same HDCP copy protection method.
E
When using the HDMI 2 terminal
You must set the audio signal input source depending on the type of HDMI
cable connected (refer to page 43 for details).
HDMI-certified cable
HDMI-certified cable
1
Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI (Digital)”.
DVI/HDMI cable
1
Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI+Analog”.
NOTE
• If a connected HDMI device is AQUOS LINK compatible, you can take advantage
of versatile functions (Pages 28_31).
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a
certified HDMI cable.
• When playing the HDMI image, the best possible format for the picture will be detected
and set automatically.
• An ARC (Audio Return Channel) compatible audio receiver must be connected to the
HDMI 1 terminal with an ARC-compatible cable.
• All HDMI terminals support 3D image signals.
Supported video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 57 for PC signal compatibility.
Connecting external devices
26
Connecting external devices
SCART connection
Y
P
B
(
C
B)
P
R
(
C
R)
Component connection
Example of connectable devices
E
VCR
E
DVD player/recorder
n
SCART cable (commercially available)
Example of connectable devices
E
VCR
E
DVD player/recorder
You will enjoy accurate colour reproduction and high quality images through the
EXT 3 terminal when connecting a DVD player/recorder or other device.
n
o
Component cable (commercially available)
Audio cable (commercially available)
Click on the first or last page to see other LC-52LE831E (serv.man13) service manuals if exist.