Sharp LC-52LE700E (serv.man14) User Manual / Operation Manual ▷ View online
11
Quick guide
Checking signal strength and
channel strength (DVB-T/C)
channel strength (DVB-T/C)
If you install a DVB-T/C antenna for the first time or
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
relocate it, you should adjust the alignment of the
antenna to receive a good reception while checking the
antenna setup screen.
Press @ and the “MENU” screen
displays.
displays.
Press
c/d to select “Setup”.
Press
a/b to select “Antenna setup-
DIGITAL”, and then press
;.
Checking signal strength
Press
a/b to select “Signal strength”, and
then press
;.
Supply voltage
CH no.
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
1
2
3
3
E
Checking channel strength
Press
a/b to select “Channel strength”, and
then press
;.
You can input a specified frequency band using the 0_9
numeric buttons.
numeric buttons.
Channel strength of DVB-T
Supply voltage
CH no.
Current
Max.
Signal strength
MHz
Signal strength
Channel strength
Current
Max.
Quality
Channel strength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current
Max.
Quality
Position and align the antenna so that
the maximum possible values for “Signal
strength” and “Quality” are obtained.
the maximum possible values for “Signal
strength” and “Quality” are obtained.
NOTE
The values of “Signal strength” and “Quality” indicate when to
check the appropriate alignment of the antenna.
check the appropriate alignment of the antenna.
E
•
4
•
Inserting the CA card into the CI module
In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the
CI slot of the TV.
CI slot of the TV.
Carefully insert the CI module in
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
the CI slot with the contact side
forward.
The logo on the CI module must
be facing outward from the rear
of the TV.
1
2
Checking CI module information
Go to “MENU” > “Digital setup” > “CI menu”.
The content of this menu depends on the provider of the CI module.
Module
General information on CI module displays.
Menu
Adjustment parameters of each CA card displays.
Enquiry
You can input numerical values such as passwords here.
NOTE
Make sure that the CI module is properly inserted.
This menu is only available for digital stations.
This menu is only available for digital stations.
•
•
•
•
LC-LE700E_GB.indd 11
LC-LE700E_GB.indd 11
2009/07/13 14:51:26
2009/07/13 14:51:26
12
Daily operation
Switching on/off
Turning on/off the power
Turn on (;) the MAIN POWER switch on the
left side of the TV (Page 4).
left side of the TV (Page 4).
Press a on the TV.
Switch it off by pressing a on the TV.
When turning off the power using a on the TV, EPG data
will be lost.
will be lost.
Standby mode
To standby mode
If the TV is switched on, you can switch it to standby by
pressing B on the remote control unit.
pressing B on the remote control unit.
Switching on from standby
From standby, press B on the remote control unit.
TV indicator status
B (Standby/On
indicator)
Status
Off
Power off
Green
Power on
Red
Standby
NOTE
If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet or turn off (a)
the MAIN POWER switch on the left side of the TV (Page 4).
A small amount of electric power is still consumed even when
a is turned off.
sure to remove the AC cord from the AC outlet or turn off (a)
the MAIN POWER switch on the left side of the TV (Page 4).
A small amount of electric power is still consumed even when
a is turned off.
Switching between digital and
analogue broadcasts
analogue broadcasts
Watching digital
broadcasts
broadcasts
Watching analogue
broadcasts
broadcasts
Changing channels
With :r/s:
With 0_9:
1
2
•
E
E
•
•
Selecting an external video
source
source
Once the connection is made,
press b to display the “INPUT
SOURCE” screen, and then press
b or
press b to display the “INPUT
SOURCE” screen, and then press
b or
a/b to switch over to
the appropriate external source
with
with
;.
EXT 2
INPUT SOURCE
TV
EXT 1
EXT 3
Selecting a sound mode
DTV mode
If multi sound modes are received, each time you press
2 the mode switches as follows.
2 the mode switches as follows.
Audio (ENG)
STEREO
L/R
L
R
LR
CH A
CH B
CH AB
Audio (ENG)
CH A
Audio (ENG)
MONO
Press
c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
Audio (ENG)
STEREO
L/R
L
R
LR
NOTE
The sound mode screen disappears in six seconds.
Selectable items vary depending on the received broadcasts.
Selectable items vary depending on the received broadcasts.
ATV mode
Each time you press 2, the mode switches as shown
in the following tables.
in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB,
MONO
MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
When no signal is input, the sound mode will display “MONO”.
E
•
•
•
E
•
Watching TV
LC-LE700E_GB.indd 12
LC-LE700E_GB.indd 12
2009/07/13 14:51:26
2009/07/13 14:51:26
13
Watching TV
EPG
EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/
DATA, view detailed information about them, tune to an event currently on-air.
DATA, view detailed information about them, tune to an event currently on-air.
Useful settings for using EPG
Basic operation
Press @ and the “MENU” screen
displays.
displays.
Press
c/d to select “Digital setup”.
Press
a/b to select “EPG setup”, and then
press
;.
Digital setup
REC picture size
[16:9 TV]
Download setup
[Yes]
EPG setup
Subtitle
CI menu
Press
a/b to select the desired item, and
then press
; (e.g., “EPG setup”, “Display
range setup”, etc.).
EPG setup
Display range setup
Genre icon setup
Yes
No
Press
a/b/c/d to select or adjust the
desired item, and then press
; (e.g., “Yes”,
“No”, etc.).
1
2
3
3
4
5
EPG display settings
EPG setup (setting for receiving EPG
data)
data)
If you want to use the EPG for digital stations, select
“Yes”. The EPG data must be automatically captured
while the TV is in standby mode. After setting to “Yes”,
it may take some time to turn off the power using the
remote control unit due to the process of the data
capture.
“Yes”. The EPG data must be automatically captured
while the TV is in standby mode. After setting to “Yes”,
it may take some time to turn off the power using the
remote control unit due to the process of the data
capture.
NOTE
If the MAIN POWER switch or the power button on the TV are
switched off, the EPG data will not be captured.
switched off, the EPG data will not be captured.
Display range setup
The “Display range setup” allows you to select three
types of time spans for display on the screen.
types of time spans for display on the screen.
Item
Mode 1
Displays six hours of programme
information.
information.
Mode 2
Displays three hours of programme
information.
information.
Mode 3
Changes to the EPG display format with
a vertical time span.
a vertical time span.
Genre icon setup
You can grey out or place a mark on desired genres and
smoothly search for programmes you frequently watch.
smoothly search for programmes you frequently watch.
Genre icon list
Icon
Genre
Icon
Genre
Movie/Drama
Music/Ballet/Dance
News/Current
affairs
affairs
Arts/Culture
(without music)
(without music)
Show/Game show
Social/Political
issues/Economics
issues/Economics
Sports
Education/Science/
Factual topics
Factual topics
Children’s/Youth
programmes
programmes
Leisure hobbies
E
•
E
E
E
LC-LE700E_GB.indd 13
LC-LE700E_GB.indd 13
2009/07/13 14:51:27
2009/07/13 14:51:27
14
Selecting a programme using EPG
Basic operation
The illustrations on this page are explained
using three digit services.
using three digit services.
Display/Close the EPG
screen
screen
Press EPG.
E
Select
Enter
Back
Exit
AM
PM
Programme info.
Search by genre
Search by date
Select a programme
Select the time span
Press
c/d to select the time span you want
to search.
Continue to press
d to display programmes in the next
time span.
E
1
•
Select the desired programme
Press
a/b to select the desired programme.
If
a or b are displayed on the left of the services,
continue to press
a/b to display next or previous
screen.
2
•
Useful functions
Check programme information
Press
a/b/c/d to select the programme you want to check.
Press R, and then press
; to tune to the selected programme.
Search a programme in a category
Press G.
Press
a/b to select the desired genre, and then press ;.
Press
a/b to select a programme you want to watch, and then press
;.
Refer to page 13 for the genre setting.
4
1
2
3
1
2
3
•
News/Current affairs
Movie/Drama
Show/Game show
Sports
Children’s/Youth programmes
Music/Ballet/Dance
Search for a programme by date/time
Press Y.
Press
c/d to select the desired time span, and then press ;.
Back to EPG
Enter
Select time
Search by time
Enter
+1 Week
Next
Today
0 AM - 6 AM
6 AM - 0 PM
0 PM - 6 PM
6 PM - 0 AM
Next
Press
a/b to select the desired programme, and then press ;.
3
1
2
1
2
5
1
2
1
2
3
Watching TV
LC-LE700E_GB.indd 14
LC-LE700E_GB.indd 14
2009/07/13 14:51:29
2009/07/13 14:51:29
Click on the first or last page to see other LC-52LE700E (serv.man14) service manuals if exist.