Sharp LC-52DH65E (serv.man3) Service Manual ▷ View online
LC-52DH65E/S, LC-52DH66E
3 – 9
5) Volume fixed level [VOLUME FIXED LEVEL]
6) Remote control operation [RC BUTTON]
7) Main Unit Operation [PANEL BUTTON]
8) Menu operation [MENU BUTTON]
9) AV position fixed [AV POSITION FIXED]
Option
0 ~ 60 (loop disabled)
Default
20
Function
The volume is fixed to the adjusted value (the main unit’s speaker only).
Exception
• In the adjustment process, the volume can be set to any level regardless of this setting.
Remarks
• When setting VOLUME FIXED to “VARIABLE”, the setting cannot be changed.
• VOLUME can be abbreviated to VOL.
• VOLUME can be abbreviated to VOL.
Option
“RESPOND”, “NO RESPOND” or “LIMITED” (loop enabled)
Default
RESPOND
Function
The operation of the remote control’s keys is set.
• When set to “NO RESPOND” the remote control’s keys in the normal state are disabled.
• When set to “NO RESPOND” the remote control’s keys in the normal state are disabled.
The POWER key (RECEPTION/STANDBY key) is also disabled.
• When set to “LIMITED”, only a part of keys (CHANNEL, etc.) is enabled and other keys are disabled. (POWER,
VOLUME
, CHANNEL
, LIGHT CONTROL (BRIGHTNESS SENSOR), BROADCAST SELECT)
Exception
• The PROCESS MODE, INSPECTION MODE and HOTEL MODE keys are enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
mode.
Remarks
The keys enabled when set to “LIMITED” correspond to those on the remote control for hotel; they differ from model
to model.
to model.
Option
“RESPOND” or “NO RESPOND” (loop enabled)
Default
RESPOND
Function
NO RESPOND: The main unit’s keys are disabled excluding the POWER key (RECEPTION/STANDBY key).
Exception
• The start operation in the process mode, inspection mode or hotel mode is enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
mode.
• For the main unit’s MENU key, menu operation is possible regardless of the setting during the initial setting when
the power is turned on for the first time.
Option
“RESPOND” or “NO RESPOND” (loop enabled)
Default
RESPOND
Function
The MENU key on the main unit or remote control is disabled.
Exception
• The PROCESS MODE, INSPECTION MODE and HOTEL MODE keys are enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
mode.
Key disabled when set
other than default
excluding the MENU key
other than default
excluding the MENU key
All the direct transition keys to menu display (AUTO PRESET, MANUAL MEMORY and others)
Remarks
When set to “NO RESPOND”
• For the models with the MENU key on the main unit, menu operation is possible regardless of the setting during
• For the models with the MENU key on the main unit, menu operation is possible regardless of the setting during
the initial setting when the power is turned on for the first time
Option
“VARIABLE” or “FIXED” (loop enabled)
Default
“VARIABLE”
Function
• When set to “FIXED”, the image adjustment and sound adjustment items in the menu are fixed in the selected
state.
• When receiving “AV POSITION” of the remote control, only the actual state is displayed, and no setting is
changed.
Remarks
• When receiving the sound select direct keys (AV POSITION key, OPC, DOLBY key, etc.), only the actual state is
displayed; no setting is changed.
• Since the settings for the hotel mode are retained even after the personal data is initialized, each item for the AV
position and image adjustment and each value for the sound adjustment are not initialized.
LC-52DH65E/S, LC-52DH66E
3 – 10
10)OSD display [ON SCREEN DISPLAY]
11)Start mode [INPUT MODE START]
Example of option: “NORMAL”
“TVD(002TV)”, “INPUT1”, “INPUT2”, “INPUT3”, “PC”, “HDMI1”, “HDMI2”, “HDMI3”, “INPUT8”
12)Input fixed [INPUT MODE FIXED]
13)Speaker ON/OFF selection [LOUD SPEAKER]
14)Remote control path through [RC PATH THROUGH]
Option
“YES”, “NO” or “LIMITED” (loop enabled)
“LIMITED” is looped only in case of need (destination).
“LIMITED” is looped only in case of need (destination).
Default
YES
Function
• When set to “NO”, the following OSD is not displayed.
Registration, setting, adjustment menu, channel call, volume bar, and input select
• When set to “LIMITED”, only a part of OSD is not displayed.
Key which may be
enabled (Example of the
confusing key)
enabled (Example of the
confusing key)
* OK if simple input select occurs or the original state returns soon if left.
Key disabled when set
other than default
(example)
other than default
(example)
* The keys by which visibility of the screen or sound is changed cannot be used.
STILL IMAGE, SCREEN DISPLAY, OFF TIMER, AV POSITION, BRIGHTNESS SENSOR, SCREEN SIZE
SELECT, AUTO PRESET, MANUAL MEMORY, IMAGE SELECT, SOUND SELECT, LANGUAGE
SELECT, AUTO PRESET, MANUAL MEMORY, IMAGE SELECT, SOUND SELECT, LANGUAGE
Remarks
• When set to “NO”,
The set time of OFF TIMER “SLEEP” is cleared.
When the card function is set to “NO”, all the functions including input select and direct keys are invalid.
When the card function is set to “NO”, all the functions including input select and direct keys are invalid.
Option
“NORMAL” or “Input source 1 (input selection or channel)”
• • • (loop enabled)
Default
NORMAL
Function
The input source or channel to start when turning on the power is set.
If “NORMAL”, the content of the last memory is followed.
If “NORMAL”, the content of the last memory is followed.
Remarks
• When set other than “NORMAL”,
Display of the channel setting menu and channel setting operation are prohibited.
• When set to “NORMAL”, “START MODE FIXED” is set to “VARIABLE” and selection is prohibited.
Option
“VARIABLE” “FIXED”, “AC CTRL” or “AC/RC CTRL” (loop enabled)
Default
VARIABLE
Function
When set to “FIXED”, switching to another channel or input is impossible after start-up in the set value of “INPUT
MODE START”.
When set to “AC CTRL”, the unit starts in the set value of “INPUT MODE START” in the case of the ACON only.
When set to “AC/RC CTRL”, the unit starts in the set value of “INPUT MODE START”.
MODE START”.
When set to “AC CTRL”, the unit starts in the set value of “INPUT MODE START” in the case of the ACON only.
When set to “AC/RC CTRL”, the unit starts in the set value of “INPUT MODE START”.
Key disabled when set
To “FIXED” (example)
To “FIXED” (example)
CHANNEL
, DIRECT CHANNEL buttons, FLASHBACK, INPUT SELECT, TV/VIDEO, AUTO PRESET, MAN-
UAL MEMORY, i.LINK, DIRECT INPUT SELECT, ATV, DTV, EPG, RADIO
Remarks
• If the “START MODE” setting is “NORMAL”, this item cannot be set.
Set to “VARIABLE”.
• When set to “FIXED”
The channel setting menu and input selection menu in the menu are not displayed.
Option
“ON” or “OFF” (loop enabled)
Default
ON
Function
The sound from the speakers is not output even if the headphones are not used.
Remarks
• When the VOLUME UP/ DOWN key is pressed, the mute icon is displayed for 4 seconds.
• For the MUTE key and sound-related keys, caution is displayed.
• For the headphones and monitor output sound, normal operation is possible.
• For the MUTE key and sound-related keys, caution is displayed.
• For the headphones and monitor output sound, normal operation is possible.
Option
“OFF”, “ON:TV RCE” or “ON:TV RCD” (loop enabled)
Default
OFF
Function
The signal received by the remote control’s light-receiving section is output to the blank pin (9pin) of RS232C.
Exception
• Even in the case of “ON:TV RCD”, the PROCESS MODE, INSPECTION MODE and HOTEL MODE keys are
enabled.
• Even in the case of “ON: TV RCD”, all the keys are enabled while entering the PROCESS MODE, INSPECTION
MODE and hotel mode.
Remarks
• The model always outputting and that impossible to output exist due to the structure of the hardware.
LC-52DH65E/S, LC-52DH66E
3 – 11
15)232C power ON control [232C POWON]
16)Hotel mode setting [HOTELMODE]
Option
“ENABLE” or “DISABLE” (loop enabled)
Default
DISABLE
Function
Power ON by the 232C command is enabled/ disabled in the standby state.
The same function as 232C command “RSPW”.
“ENABLE”: POWR0001 is always enabled.
“DISABLE”: Start-up may be impossible at POWR0001.
(If the 232C command reception module is set to OFF, the command is invalid.)
The same function as 232C command “RSPW”.
“ENABLE”: POWR0001 is always enabled.
“DISABLE”: Start-up may be impossible at POWR0001.
(If the 232C command reception module is set to OFF, the command is invalid.)
Option
“OFF” or “ON” (loop enabled)
Default
OFF
Function
The items set in the hotel mode setting menu are enabled or disabled.
The same item as [HOTELMODE] in the adjustment process menu.
The same item as [HOTELMODE] in the adjustment process menu.
Remarks
• Each operation of the hotel mode is impossible unless this item is set to ON.
LC-52DH65E/S, LC-52DH66E
3 – 12
9. Video signal adjustment procedure
The adjustment process mode menu is listed in Section 5.
Signal generator level adjustment check (Adjustment to the specified level)
1. Entering the adjustment process mode
Enter the adjustment process mode according to Section 2.
2. PAL signal adjustment
CAUTION: When going on "PAL signal adjustment" of 2 item after all adjustment completion, please be sure to put "TUNER adjustment" of 3 item into
effect after it.
3. TUNER adjustment
4. SECAM adjustment
• Composite signal PAL
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
• RGB signal
: 0.7Vp-p
± 0.02Vp-p
• 15K component signal (50 Hz) : Y level
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
: PB, PR level
: 0.7Vp-p
± 0.02Vp-p
• 33K component signal
: Y level
: 0.7Vp-p
± 0.02Vp-p (Pedestal to white level)
: PB, PR level
: 0.7Vp-p
± 0.02Vp-p
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Full Field Color Bar composite
signal
PAL
Full Field Color Bar composite
signal
[Terminal]
EXT1 SCART IN
EXT1 SCART IN
• Feed the PAL full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
SCART IN.
2
Auto adjustment
performance
performance
Page 4/16
Bring the cursor on [PAL ADJ] and press [OK] [PAL ADJ OK] appears when fin-
ished.
ished.
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
PAL
Split Field Colour Bar RF signal
U/V
PAL
Split Field Colour Bar RF signal
U/V
[Terminal]
TUNER
TUNER
• Feed the PAL Split Field colour bar signal (E-12ch) to TUNER.
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture
level.
Signal level: 55 dB
• Make sure the PAL colour bar pattern has the sync level of 7:3 with the picture
level.
Signal level: 55 dB
µV ± 1dB (75Ω LOAD)
2
Auto adjustment
performance
performance
Page 3/16
Bring the cursor on [TUNER ADJ] and press [OK]
[TUNER ADJ OK] appears when finished.
[TUNER ADJ OK] appears when finished.
Adjustment point
Adjustment Conditions
Adjustment procedure
1
Setting
[Signal]
SECAM
Full Field Colour Bar signal
SECAM
Full Field Colour Bar signal
[Terminal]
EXT1 SCART IN
EXT1 SCART IN
• Feed the SECAM full field colour bar signal (75% colour saturation) to EXT1
SCART IN.
SCART IN.
2
Auto adjustment
performance
performance
Page 4/16
Bring the cursor on [SECAM ADJ] and press [OK] [SECAM ADJ OK] appears
when finished.
when finished.
100% white
[VIDEO in signal]
100% white
[E-12CH]
100% white
Click on the first or last page to see other LC-52DH65E (serv.man3) service manuals if exist.