Sharp LC-50LE771E Service Manual ▷ View online
21
LC-42/50LE772
LC-42/50LE771
Options 3
Tuner Settings
22
LC-42/50LE772
LC-42/50LE771
Source Settings
Diagnostic
23
LC-42/50LE772
LC-42/50LE771
Main SW update
In MB90 project there is several file of software. From following steps software update procedure can be seen:
1. MB90_en.bin and usb_auto_update_A1.txt documents should copy directly inside of a flash
memory (not in a folder). In some case, it could be necessary to include additional file:
mboot_spi.bin.
2. Insert flash memory to the TV in USB-1 port when TV is powered off. USB-1 port is just above of
yellow SIDE AV connector.
3. While pushing the OK button in remote control, power on the wait until LEDs blink quickly. TV
will power-up itself.
4. When the standby LED starts to blink rapidly, you can release the OK button.
5. If First Time Installation screen comes, it means software update procedure is successful.
6. After FTI menu appears, you should power OFF and ON the TV set.
7. Updated software version might be checked from service menu (menu--- 4, 7, 2, 5)
[2] SOFTWARE UPDATE
24
LC-42/50LE772
LC-42/50LE771
CHAPTER 6. TROUBLESHOOTING
[1] Troubleshooting
48
15.Software Update
15.1 Main SW update
In MB90 project there is only one software. From following steps software update procedure
can be seen:
1. MB90_en.bin, mboot.bin and usb_auto_update_mb90.txt documents should copy directly
inside of a flash memory(not in a folder).
2. Insert flash memory to the tv when tv is powered off.
3. While pushing the OK button in remote control, power on the and wait. TV will power-up
itself.
4. If First Time Installation screen comes, it means software update procedure is successful.
16.Troubleshooting
A. No Backlight Problem
Problem: If TV is working, led is normal and there is no picture and backlight on the panel.
Possible couses: Backlight pin, dimming pin, backlight supply, stby on/off pin
BACKLIGHT_ON/OFF pin should be high when the backlight is ON. R119 must be low
when the backlight is OFF. If it is a problem, please check Q10 and the panel cables. Also it
can be tested in TP69 in main board.
1. No Backlight Problem
Click on the first or last page to see other LC-50LE771E service manuals if exist.